Storkcraft gliders and their matching gliding ottomans are a common sight in nurseries. The chair usually outlasts its pads: the seat goes flat, the back slumps and the fabric stains. We make new seat, back and ottoman cushions to the size of your Storkcraft glider, so you can keep the frame and start fresh.
Quick answerStorkcraft glider replacement cushions: the short answer
Fabrica Kraft makes custom cushions that fit Storkcraft gliders and glider ottomans, cut from your measurements to within ±0.5″. You choose the fabric, a firm or medium seat foam and a softer back if you like, and every cover zips off for cleaning.
Build cushions for your Storkcraft glider
Storkcraft glider cushions: key facts
| Fits | Storkcraft gliders, glider rockers and gliding ottomans |
|---|---|
| Pieces | Seat, back, arm pads and ottoman cushion, sold as you need them |
| Seat foam | HD36-R (medium) or Lux-R (firm), optional Dacron wrap |
| Back foam | Super Soft available for back cushions only |
| Fabrics | Sunbrella, Warwick and velvet; 5,000+ colors |
| Lead time | 2–3 weeks; template shapes 5–6 weeks |
What we make for Storkcraft gliders
Can the ottoman match the glider?
Yes. Order the ottoman cushion in the same fabric and piping as the chair and they will look like a set again. Many glider ottomans have a smaller, nearly square top, so measure it on its own rather than assuming it matches the chair seat.
MeasuringHow do I measure a Storkcraft glider?
If the back has a rounded top or shaped sides, trace the old cushion on kraft paper and email care@fabricakraft.com before ordering. Our measuring guide covers the basics.
Everyday useWhich fabric holds up in a nursery?
Indoor-outdoor fabrics such as Sunbrella and Warwick are made for heavy use and many are easy to spot clean. Velvet feels softer but needs gentler care. Order a swatch to see and feel the fabric before you choose.
For general glider advice, including tie placement and curved backs, see our glider rocker replacement cushions page.
How it worksOrder in three steps
Measure the seat, back and ottoman separately. Our measuring guide shows how.
Choose fabric and foam in the builder, or order a swatch first.
We cut to within ±0.5″ of your sizes and remake free if we miss. See our fit guarantee.
Frequently asked questions
Are these official Storkcraft cushions?
No. Fabrica Kraft makes custom cushions to your measurements so they fit your Storkcraft glider. We are not affiliated with, endorsed by or sponsored by Storkcraft.
Can I order only the ottoman cushion?
Yes. There is no minimum order, so you can order one cushion, a full set, or anything in between.
Can the back cushion be softer than the seat?
Yes. Super Soft foam is available for back cushions. Seats use HD36-R or Lux-R so they keep their shape.
Can I wash the covers?
Every cover has a zipper, so it comes off the foam. Clean it according to the care instructions for the fabric you choose.
What if the cushions do not fit?
We cut within ±0.5″ of the size you order. If we miss, we remake the cushion free under our fit guarantee.
How long does it take?
Standard shapes take 2–3 weeks. Shaped backs made from a template take 5–6 weeks.
Storkcraft is a trademark of its owner. Fabrica Kraft is not affiliated with, endorsed by or sponsored by Storkcraft. All trademarks belong to their respective owners and are used only to describe fit.
