Grady-White builds saltwater fishing and family boats, including center consoles and dual consoles. Seat cushions on any boat take a beating from sun, salt spray and wet gear, and replacing them is one of the simplest ways to make an older hull feel new. We make replacement cushions and covers to the measurements of your seats.
Quick answerGrady-White replacement cushions: the short answer
Fabrica Kraft makes custom replacement cushions and covers for Grady-White boats from your measurements or a paper template, in Sunbrella with quick-drying Dryfast foam. Every cover has a zipper. Curved bow and coaming cushions are made from templates.
Build cushions for your Grady-White
Grady-White boat cushions: key facts
| Boats | Grady-White center consoles, dual consoles and other models |
|---|---|
| Cushions | Helm and leaning-post seats, bow seating, cockpit benches, backrests |
| Foam | Dryfast (quick-drying) for exposed seating |
| Fabric | Sunbrella in thousands of colors; faux leather also available |
| Shapes | Rectangles in 2–3 weeks; curved shapes from a template in 5–6 weeks |
| Fit tolerance | Within ±0.5″, with a free remake if we miss |
What we make for Grady-White boats
Which foam works on an open boat?
Choose Dryfast. It has an open structure that lets water run straight through instead of soaking in, so a cushion that takes spray or a rain shower dries out much faster than standard foam. That matters on a boat where cushions stay aboard and rarely get stored dry.
MeasuringHow do I measure Grady-White seats?
For curved bow sets, email care@fabricakraft.com before you trace and we will tell you what to send. Our measuring guide covers the basics.
CoversCan I keep my old cushions and just re-cover them?
Yes, if the foam is still sound. Covers only are cut to the cushion measurements and close with a zipper. If your cushions are fastened with snaps or built around a base board, email us before ordering so we can talk through how the new covers will attach. For more marine options, see our pontoon and center console cushions.
How it worksOrder in three steps
Measure each cushion, or trace curved ones on paper. Our measuring guide shows how.
Choose fabric and foam in the builder, or order a swatch first.
We cut to within ±0.5″ of your sizes and remake free if we miss. See our fit guarantee.
Frequently asked questions
Are these official Grady-White cushions?
No. Fabrica Kraft makes custom cushions to your measurements so they fit your Grady-White boat. We are not affiliated with, endorsed by or sponsored by Grady-White Boats.
What foam should I choose for boat seats?
Dryfast. It drains and dries quickly, which suits seats exposed to spray and rain.
Can you match the curved bow cushions?
Yes. Trace each cushion on paper and send the templates. Template orders take 5–6 weeks.
How do the cushions attach?
Ties in matching fabric are standard and Velcro is available on request. If your seats use snaps, email us before ordering.
Can I order a single cushion?
Yes. There is no minimum order.
Grady-White is a trademark of its owner. Fabrica Kraft is not affiliated with, endorsed by or sponsored by Grady-White. All trademarks belong to their respective owners and are used only to describe fit.
