Custom Boat Cushions - Sunbrella Horizon Marine Vinyl
Quick answer Boat seats are rarely rectangular, and salt, sun and spray wear ordinary cushions out fast. We make boat cushions from your template in Sunbrella Horizon marine vinyl, with foam that drains after a wave o...
Frequently bought together
Same fabric, made together, shipped together.
Bow seats taper, helm seats curve and sun pads wrap around hatches, so off-the-shelf cushions rarely fit a boat. Our custom boat cushions are made to your boat's exact shape for bow seats, cockpit benches, helm seats, sun pads and cabin berths, in Sunbrella Horizon marine-grade vinyl. Horizon is built for salt, sun and spray, and pairs with Dry Fast foam that drains water through the cushion so it dries fast.
How to measure
- Make a paper or cardboard template of each seat and mark the bow-facing side.
- Measure each straight edge and the thickness you want; 3" to 4" is typical for seats.
- Note snaps, cutouts for cleats or cup holders, and hinged lids.
- Send photos of the template with a tape measure in frame along with your quote.
Fabric
Pick from 19 popular Sunbrella Horizon marine vinyl colors above. Want a different color? We stock all Horizon colors: browse the full range and name it in your quote notes.
Common boat cushion thicknesses
| Seat | Typical thickness | Foam |
|---|---|---|
| Helm and passenger seats | 3″–4″ | Dry Fast |
| Cockpit and bow benches | 3″–4″ | Dry Fast |
| Sun pads | 3″–4″ | Dry Fast |
| Cabin berths and V-berths | 4″–6″ | High Density or Dry Fast |
Boat seats vary too much for standard sizes, so send a template of each seat.
Most orders ship in 2–3 weeks with free shipping, and every cushion is cut within ½″ (maximum ±1″) under our fit guarantee. Foam types, delivery and returns are covered in the Fill guide and Shipping & Return tabs on this page.
Measuring tips from customer questions
- This builder is for boats. For patio chairs, benches and loungers, use our outdoor cushions instead.
- For a tapered (trapezoid) seat, such as a bow cushion, measure the front edge, the back edge and the depth. Take the depth straight across, at a right angle to the front edge, not along the slanted side.
- Measure each slanted side as well, and tell us whether one side is square to the front edge or both sides taper equally, so we can check the shape before we cut.
- Rounded corners can be made from measurements. Curved edges, such as a bow cushion that follows the hull or a sun pad around a hatch, need a full-size paper template.
- Horizon comes about 54″ wide, so a piece wider than that in both directions needs a seam. A very large bow cushion is often better made as two cushions.
Questions
Can you make sun pads for my boat?
Yes. Send the outline of the deck area and we make a sun pad in one or more sections.
Is Horizon vinyl better than fabric for a boat?
For seats that get wet and salty, yes. Horizon wipes clean and resists mildew and UV.
Do you add snaps?
Add snap locations in the quote notes, or we can leave tabs for you to fit snaps on board.
How do I measure a tapered bow cushion?
Measure the front edge, the back edge, the depth straight between them and each slanted side, and say whether one side is square. A sketch with every measurement written on it, photographed with your template, helps us confirm the shape.
Can you make cushions with curved edges?
Yes, from a full-size paper template. Rounded corners can be made from measurements, but a curved edge has to be traced so we can follow it.
Seat cushions
Measure the seat side to side and front to back, between arms if there are any. Round up to the nearest ¼″. For a tapered seat, measure the front and back widths.
Back cushions
Measure from the seat to where you want the cushion to stop. Width is usually the same as the seat.
Chaise and Adirondack
Measure the full length laid flat, then the back section from the top to the hinge point where the back rest bends.
Covers only
Measure your foam, not the old cover. We cut the cover to fit snugly.
Pillows
Order the cover the size of your insert. Our micro-fibre inserts are sized to fill the cover.
Curtains
Panel width: add the panels up to 1½–2× the opening. Length: from the rod (or top of the tab) to where the hem should land.
Odd shape? Tick “unique shape” and send a paper template after you order. Questions: operation@fabricakraft.com.
Sunbrella In stock
Solution-dyed acrylic for indoors and out: fade-, mildew- and stain-resistant. Also marine-grade Horizon vinyl and waterproof fabrics (no piping) for outdoor pieces.
Warwick In stock
Australian design house. Upholstery, velvets, faux leathers, drapery and sheers for indoor use.
Ultraleather Quote · 8–12 weeks
Performance faux leather by Ultrafabrics, with a soft, leather-like feel and a wipe-clean surface. Many collections work indoors and out.
Gabriel Quote · 8–12 weeks
Danish contract-grade upholstery, designed to wear well in homes, offices and hotels.
| Foam | Feel | Best for | Lasts |
|---|---|---|---|
| HD36-R | Medium | Everyday benches and window seats | About 7 yrs |
| Lux-R | Firm | Thin 1–3″ dining benches | About 7 yrs |
| Dryfast | Firm, open-cell | Outdoors: drains and dries fast | 5–8 yrs |
| Poly | Medium | Occasional or guest seating | 1–2 yrs |
Back cushions: Super Soft for a plush lean-back or High density (HD36-R) for a firmer back indoors; Dryfast outdoors. Super Soft is not used for seats.
Cover only: every product can be ordered as just the cover, cut to your size.
Pillows: soft polyester micro-fibre insert, or cover only.
Dacron wrap: a polyester layer around the foam that rounds the edges and fills the cover. Single or double. All foam is CertiPUR-US certified.
Can I build something else in this fabric?
Yes. On any fabric page, pick what you are making: cushions, pillows or curtains.
Do I save if I order more?
Yes. The more you order, the less each piece costs: 2+, 4+, 8+ and 16+ unlock lower prices, shown above the Add to cart button.
Can I order just the cover?
Yes. Choose “Cover only” and measure your foam.
Can I leave it outside?
Choose Outdoor: Sunbrella fabric with Dryfast foam, which drains and dries fast.
Is the price final?
Yes for standard shapes, with free shipping included. Sales tax is added at checkout where it applies. Unique shapes are confirmed once we have your template.
Not sure which foam to choose?
Pick a package: Essential (HD36-R), Signature (Dryfast outdoors, Lux-R indoors) or Premium (Signature plus piping).
What if I measure wrong?
Send photos or a short video of your seat to care@fabricakraft.com and we’ll check before you order. You can cancel free until you approve your spec sheet, and on your first order a mis-measured cushion is remade once at 50% off.
Questions before ordering?
Email operation@fabricakraft.com or contact us.
Free shipping. Most cushions are made to order in 2–3 weeks. Gabriel and Ultraleather are pre-order fabrics with an 8–12 week lead time, confirmed on your quote. Your cover and foam may arrive in separate boxes a few days apart.
First Order Promise: send us photos or a video and we’ll check your measurements; cancel free until you approve your spec sheet; if we’re outside our maximum tolerance (±1″, or ±1½″ over 6 sq ft), we remake it free; if you mis-measure on your first order, we remake it once at 50% off; and swatch costs come back as a discount code.
Custom products can’t be returned unless there is a defect or a manufacturing error. See our Return Policy, how ordering works or contact us with questions before you order.







