Custom Window Seat Cushions, Bay Window & Nook, Made to Measure
Quick answer Bay windows have angled ends and built-in seats are rarely a standard size, so ready-made cushions leave gaps. We cut yours to the exact shape, including trapezoid, L-shaped and curved seats.A window seat...
Frequently bought together
Same fabric, made together, shipped together.
A window seat only gets used if the cushion fits, and most don't: bay windows have angled ends, alcoves curve and built-ins come in odd lengths. A custom window seat cushion or bay window cushion made to your exact shape turns the ledge into the best reading spot in the house. Sunbrella fabric is solution-dyed, so it resists fading in the strong sun a window seat gets every day. Browse all our window seat cushions, including trapezoid, L-shaped and T-shaped styles.
How to measure
- Measure the back edge (against the wall) and the front edge separately: on a bay window these are different.
- Measure the depth from wall to front edge at the center.
- For angled ends, measure each side edge, or trace the seat on paper and send a photo with your quote.
- 2″ to 4″ foam is typical. Add a Dacron wrap for a softer, rounded look.
Common window seat cushion sizes
| Seat | Typical depth | Thickness |
|---|---|---|
| Shallow window ledge | 14″–17″ | 2″ |
| Standard window seat | 18″–20″ | 2″–4″ |
| Deep reading nook | 22″–30″ | 3″–4″ |
| Bay window (trapezoid) | back edge longer than front by 10″–30″ | 2″–4″ |
Lengths vary with every window, so measure the back and front edges and enter both.
Most orders ship in 2–3 weeks with free shipping, and every cushion is cut within ½″ (maximum ±1″) under our fit guarantee. Foam types, delivery and returns are covered in the Fill guide and Shipping & Return tabs on this page.
Measuring tips from customer questions
- Sizes customers have ordered run from about 46″ to 122″ long and 10″ to 25″ deep, most often 15″ to 24″ deep.
- Length runs along the window wall and depth runs from the wall to the front edge. Check you haven't swapped them before you order.
- Bay window seats are often made as 3 pieces: a trapezoid center plus two end pieces, each with one angled end. Measure the back edge, front edge and depth of each section separately.
- If the seat is not the same depth from end to end, measure the depth at each end, not just in the middle.
- Seat over a hinged storage lid? Split the cushion where the lid opens so the lid can lift on its own, and leave a small gap between the pieces.
- Always enter a thickness as well as the length and depth.
Questions about window seat cushions
Can you make a trapezoid bay window cushion?
Yes. Give us the back length, front length and depth, and we cut the angles to match.
Which fabric is best for a sunny window seat?
Sunbrella. It is solution-dyed acrylic, so the color goes all the way through the fiber and resists fading.
How thick should a window seat cushion be?
2″ to 4″ is typical. Thinner keeps a low ledge usable; thicker feels more like a sofa.
Do window seat cushions come with zippers?
Yes, every cover has a zipper so the foam can be removed and the cover cleaned.
What is the best foam for a window seat cushion?
For a seat you sit on every day, High Density foam with a Dacron wrap stays comfortable and keeps its shape. For a firmer ledge, choose Lux. Compare them in the Fill guide tab.
Should my bay window cushion be one piece or three?
Bay seats are often made as three pieces: a trapezoid center plus two pieces with one angled end. Each piece follows the angles of its own section and is easier to lift. Measure each section and order each piece separately.
My window seat has a storage lid. Where should the cushion split?
Split it along the edges of the lid so the lid can open without moving the other pieces. Measure the lid and the fixed sections separately and leave a small gap between them.
Shop by brand
Replacing a store-bought window seat cushion? See Pottery Barn and IKEA. Measure your cushions the same way and enter the exact size.
Related
Read how to measure a window seat cushion, browse bench cushions, or add bolsters and throw pillows.
Seat cushions
Measure the seat side to side and front to back, between arms if there are any. Round up to the nearest ¼″. For a tapered seat, measure the front and back widths.
Back cushions
Measure from the seat to where you want the cushion to stop. Width is usually the same as the seat.
Chaise and Adirondack
Measure the full length laid flat, then the back section from the top to the hinge point where the back rest bends.
Covers only
Measure your foam, not the old cover. We cut the cover to fit snugly.
Pillows
Order the cover the size of your insert. Our micro-fibre inserts are sized to fill the cover.
Curtains
Panel width: add the panels up to 1½–2× the opening. Length: from the rod (or top of the tab) to where the hem should land.
Odd shape? Tick “unique shape” and send a paper template after you order. Questions: operation@fabricakraft.com.
Sunbrella In stock
Solution-dyed acrylic for indoors and out: fade-, mildew- and stain-resistant. Also marine-grade Horizon vinyl and waterproof fabrics (no piping) for outdoor pieces.
Warwick In stock
Australian design house. Upholstery, velvets, faux leathers, drapery and sheers for indoor use.
Ultraleather Quote · 8–12 weeks
Performance faux leather by Ultrafabrics, with a soft, leather-like feel and a wipe-clean surface. Many collections work indoors and out.
Gabriel Quote · 8–12 weeks
Danish contract-grade upholstery, designed to wear well in homes, offices and hotels.
| Foam | Feel | Best for | Lasts |
|---|---|---|---|
| HD36-R | Medium | Everyday benches and window seats | About 7 yrs |
| Lux-R | Firm | Thin 1–3″ dining benches | About 7 yrs |
| Dryfast | Firm, open-cell | Outdoors: drains and dries fast | 5–8 yrs |
| Poly | Medium | Occasional or guest seating | 1–2 yrs |
Back cushions: Super Soft for a plush lean-back or High density (HD36-R) for a firmer back indoors; Dryfast outdoors. Super Soft is not used for seats.
Cover only: every product can be ordered as just the cover, cut to your size.
Pillows: soft polyester micro-fibre insert, or cover only.
Dacron wrap: a polyester layer around the foam that rounds the edges and fills the cover. Single or double. All foam is CertiPUR-US certified.
Can I build something else in this fabric?
Yes. On any fabric page, pick what you are making: cushions, pillows or curtains.
Do I save if I order more?
Yes. The more you order, the less each piece costs: 2+, 4+, 8+ and 16+ unlock lower prices, shown above the Add to cart button.
Can I order just the cover?
Yes. Choose “Cover only” and measure your foam.
Can I leave it outside?
Choose Outdoor: Sunbrella fabric with Dryfast foam, which drains and dries fast.
Is the price final?
Yes for standard shapes, with free shipping included. Sales tax is added at checkout where it applies. Unique shapes are confirmed once we have your template.
Not sure which foam to choose?
Pick a package: Essential (HD36-R), Signature (Dryfast outdoors, Lux-R indoors) or Premium (Signature plus piping).
What if I measure wrong?
Send photos or a short video of your seat to care@fabricakraft.com and we’ll check before you order. You can cancel free until you approve your spec sheet, and on your first order a mis-measured cushion is remade once at 50% off.
Questions before ordering?
Email operation@fabricakraft.com or contact us.
Free shipping. Most cushions are made to order in 2–3 weeks. Gabriel and Ultraleather are pre-order fabrics with an 8–12 week lead time, confirmed on your quote. Your cover and foam may arrive in separate boxes a few days apart.
First Order Promise: send us photos or a video and we’ll check your measurements; cancel free until you approve your spec sheet; if we’re outside our maximum tolerance (±1″, or ±1½″ over 6 sq ft), we remake it free; if you mis-measure on your first order, we remake it once at 50% off; and swatch costs come back as a discount code.
Custom products can’t be returned unless there is a defect or a manufacturing error. See our Return Policy, how ordering works or contact us with questions before you order.







