Azalea Ridge Replacement Cushions

Azalea Ridge patio sets often need new cushions long before the frames wear out. We make replacement cushions to the exact size of your Azalea Ridge seating, in Sunbrella fabric with outdoor foam.

Shop

Build cushions to fit your Azalea Ridge furniture

Seat & backChair cushions

Dining, club and lounge chairs, with ties or without.

Build yours
Sofas & sectionalsDeep seat cushions

Deep seating, loveseats and sectional pieces.

Build yours
LoungingChaise cushions

Full-length chaise lounge pads, hinged or one piece.

Build yours
Porch & gliderSwing cushions

Porch swings, gliders and daybeds.

Build yours
Fit

What we make for Azalea Ridge furniture

Deep seating, sofa and sectional cushions
Dining and club chair seat and back cushions
Chaise lounge cushions
Glider, swing and loveseat cushions
Cushion covers only, if your foam is still good
How it works

Order in three steps

1

Measure your existing Azalea Ridge cushion: width at the front and back, depth, thickness, and where any ties or zippers sit. Our measuring guide shows how.

2

Choose your fabric and foam in the builder. Not sure about color? Order a swatch first.

3

We cut your cushions to within ±0.5″ of your measurements and ship in 2–3 weeks.

Why replace

Better than the original

Sunbrella fabric is solution-dyed, so the color goes all the way through the fiber and resists fading in the sun.
Choose quick-drying Dry Fast foam so cushions drain after rain.
Match your original color or pick a new one. Order a swatch first.
One cushion or a full set, with no minimum order.
More

Matching your set

Measure each cushion in your set separately, including back cushions, and note the shape of the front edge.

If you want to keep the original color scheme, order a swatch to compare before you buy a full set.

FAQ

Frequently asked questions

Are these official Azalea Ridge cushions?

No. Fabrica Kraft makes custom cushions to your measurements so they fit your Azalea Ridge furniture. We are not affiliated with Azalea Ridge.

Will they fit my Azalea Ridge furniture?

Yes, as long as you send the measurements of your existing cushions. We cut to within ±0.5″ of your sizes, and if a cushion arrives outside that, we remake it. See our fit guarantee.

Can you copy an unusual shape?

Yes. T-shaped, rounded, angled and notched cushions are all possible. Email care@fabricakraft.com with a photo and your measurements.

How long does it take?

Most orders ship in 2–3 weeks. Custom shapes from a template take 5–6 weeks.

Fabrica Kraft is not affiliated with or endorsed by Azalea Ridge. All trademarks belong to their respective owners and are used only to describe fit.