Custom Adirondack chair cushions made to fit the deep, sloped seat and tall back of your Adirondack chair. Choose a one-piece seat-and-back cushion or a seat pad only, pick a Sunbrella fabric, and we cut and sew it to your measurements.
- Seat and back sized to your chair, including tapered seats and curved or contoured backs
- Ties at the top and seat so the cushion stays put in wind
- Sunbrella fabric that resists fading and mildew
- Dry Fast foam option for chairs that live outdoors
- Cut to within ½″ (maximum ±1″) of your size; ships in 2–3 weeks
Start with the Adirondack chair cushion builder. Own a POLYWOOD chair? See POLYWOOD replacement cushions. Have rockers too? See rocking chair cushions, or all outdoor chair cushions.
Why Adirondack chairs need a shaped cushion
Adirondack chairs have a seat that slopes down toward the back and a tall, angled back, often with a fan-shaped top. A flat square cushion slides down the slope and leaves the slats exposed behind you. A cushion made to your chair follows the seat and back, so it stays in place and supports you from your knees to your shoulders.
- One-piece cushion: runs from the front of the seat up the back, sewn with a hinge where the seat meets the back. It covers the slats completely and is the most comfortable for lounging.
- Seat pad only: simpler, lighter and easy to store. Good for chairs whose back is already comfortable.
- Footrest and ottoman cushions: made to match, in the same fabric.
How to measure an Adirondack chair
- Seat width at the front, across the front edge.
- Seat width at the back, where the seat meets the back. Most Adirondack seats taper, so this is usually narrower.
- Seat depth, from the front edge to the crease where the seat meets the back.
- Back height, from that crease to where you want the cushion to end, usually just below the top of the back.
- Back width, at the bottom and at the top. For a curved or fan back, trace the top edge on paper and send us a photo.
Our measuring guide has photos of each step.
Foam and thickness
2″ to 3″ is the right thickness for most Adirondack chairs. The seat already slopes, so a thicker cushion can push you forward off the chair. For chairs that stay outside, choose Dry Fast foam: it is open-cell, so rain drains straight through and the cushion dries quickly. For a covered porch, High Density foam gives a medium, softer sit. All foam is CertiPUR-US certified.
Fabric for Adirondack cushions
Sunbrella is solution-dyed acrylic, so the color goes all the way through the fiber and holds up on sunny docks, decks and lawns. Standard Sunbrella is water-repellent rather than waterproof, which is why Dry Fast foam matters for chairs left out in the rain. Sunbrella fabric carries a 5-year warranty from the fabric maker, and our workmanship is covered for 2 years. Order swatches to compare colors against your chairs.
Care
Brush off dirt and clean spots with mild soap and water, then let the cushion air dry. Every cover has a zipper, so it can come off for a full wash. Bringing cushions in during long wet spells and over winter helps them last longer.
Questions about Adirondack chair cushions
Should I choose a one-piece cushion or a seat pad?
A one-piece seat-and-back cushion covers the slats completely and is the most comfortable for lounging. A seat pad alone is simpler, stores easily and suits chairs with a comfortable back already.
Do Adirondack cushions need ties?
We recommend them. Adirondack backs are steep, and ties at the top and the seat keep the cushion from sliding or blowing off.
Do you make cushions for POLYWOOD and other recycled-plastic Adirondack chairs?
Yes. We work from your measurements, so any brand or material of chair can be fitted, including wood, cedar, poly lumber and resin.
Can I order covers only for my Adirondack cushions?
Yes. If your foam still holds its shape, order zippered covers only made to the size of the foam.
Browse all Sunbrella cushions and patio cushions for the rest of your outdoor furniture.
Custom cushions you approve before we cut
Fabrica Kraft has made custom indoor and outdoor cushions since 2021, with 5,000+ orders across our websites, Etsy and Faire. Every cushion is cut and sewn to the size you enter. Here is what comes with every order.
- A spec sheet before we cut. You approve a spec sheet with your sizes and options before production starts, and you can cancel free of charge any time before you approve it.
- Fit guarantee. We usually cut within ½″ of your measurements. If a cushion arrives outside our maximum tolerance (±1″ on length and width, ±1½″ for cushions of 6 sq ft or more, ±½″ on thickness), we remake it free.
- First Order Promise. Send photos or a short video of your seat and we check your measurements before you order. If you mis-measure on your first order, we remake it once at 50% off.
- Price match guarantee. Find a lower price on an identical item and we will match it. See the terms.
- Warranty on every layer. A 2-year workmanship warranty from Fabrica Kraft, a foam warranty of up to 7 years depending on the foam, and Sunbrella's 5-year fabric warranty (10 years on Sunbrella marine fabrics).
- Genuine Sunbrella, tagged. Every Sunbrella cushion carries a Sunbrella x Fabrica Kraft collaboration tag, and all our foam is CertiPUR-US certified.
- Cover only when you need it. Every builder offers cover only, so you can replace a worn cover and keep your foam.
- No minimum order. One cushion or a full set, with trade pricing for designers, hotels and other businesses.
- As seen in The Washington Post (August 9, 2026).
Read customer reviews · Warranty and fit guarantee · Fabrica Kraft at a glance
Figures as of November 2026. Sunbrella® is a registered trademark of Glen Raven, Inc.
Adirondack Chair Cushion FAQs
Quick answers about sizing, fabrics, foam and delivery.







