Everything we make is cut to your numbers, so a few careful minutes with a tape measure gives you a perfect fit. If you're unsure, send us your measurements and a photo before you order and we'll check them.
Rule 1
Measure in inches and round to the nearest ¼″.
Rule 2
Measure the seat or frame, not the old cushion. Old cushions flatten and shrink with use.
Rule 3
Use a metal tape, not a cloth one, and measure twice.
Cushions
Note three numbers: the width (side to side), the depth (front to back) and the thickness you want. Most seat cushions are 3–5″ thick, and we make up to 8″.
Ordering covers only? Measure your existing foam, not the old cover. Covers are measured seam to seam and foam edge to edge.
Shapes and special cushions
- Chaise lounges and hinged cushions: measure the seat length and the back length separately; the total is the two added together.
- Tapered (trapezoid) seats: measure the front width, the back width and the depth.
- Round seats: measure straight across the widest point.
- Bolsters: measure the length end to end and the diameter across the round end.
- Unusual shapes (notches, curves, angled ends): order with the unique-shape option and send us a paper template after checkout. We confirm the cut before we start.
Step-by-step guides
Detailed guides with photos for the most common pieces:
Replacement outdoor cushionsChairs, loveseats and patio setsRead the guide
Couch and sofa cushionsSeat and back cushionsRead the guide
Window seat cushionsIncluding bay windowsRead the guide
Chaise lounge cushionsFlat and hingedRead the guide
Boat cushionsIncluding templatesRead the guide
Not sure?Send us your numbers and a photo and we'll check themContact us
Curtains
Put the rod or track up first, then measure from it.
1. Width
- Measure the length of the rod between the finials (the decorative ends).
- For a full, gathered look, order panels that add up to about 2× the rod width. For a flatter, more tailored look, about 1.5× is enough.
- Example: a 100″ rod needs about 200″ of total curtain width, such as four 50″ panels.
2. Length
| Style or look | How to measure |
|---|---|
| Tab top and back tab | From the top of the rod to where you want the curtain to end. |
| Rod pocket | From the top of the rod, then add about 1″ so the rod slides in easily. |
| Floor length | Subtract about ½″ so the hem just clears the floor. |
| Puddled | Add 2–4″. |
| Outdoor curtains | Measure to the deck or patio and subtract about 1″ so the hem stays out of rainwater and dirt. |
3. Choose your lining
- Unlined curtains let in soft daylight.
- Blackout lining blocks light and adds privacy, for indoor and outdoor drapery.
- Sheers are always made unlined so they stay light and airy.
