O.W. Lee is best known for wrought iron and metal patio furniture, and sturdy metal frames like these often outlive their original cushions by years. When the fabric fades or the foam stays wet after a storm, we can make new cushions to the size of your pieces in Sunbrella, with foam suited to how and where you use them.
Quick answerReplacement cushions for O.W. Lee patio furniture: the short answer
Fabrica Kraft makes replacement cushions for O.W. Lee deep seating, gliders, swivel rockers, chaise lounges and dining chairs from your measurements, in Sunbrella with a removable zippered cover. Choose Dryfast foam for open patios or Lux-R and HD36-R for covered spaces.
Build cushions to fit your O.W. Lee furniture
O.W. Lee replacement cushions: key facts
| Furniture | O.W. Lee deep seating, gliders, swivel rockers, chaises, dining and bar chairs |
|---|---|
| Fabric | Sunbrella or Warwick outdoor fabrics, 5,000+ colours |
| Foam | Dryfast for open patios; Lux-R or HD36-R under cover; CertiPUR-US certified |
| Attachments | Ties in matching fabric; Velcro on request |
| Fit tolerance | Within ±0.5″ |
| Lead time | 2–3 weeks; custom shapes from a template 5–6 weeks |
What we make for O.W. Lee furniture
Which foam suits metal patio furniture left outdoors?
Wrought iron and metal frames usually live outside year round, so the cushion foam matters as much as the fabric. On an open patio or pool deck, Dryfast foam lets rain run straight through and dries much faster than standard foam. Under a pergola or covered porch, Lux-R or HD36-R with a Dacron wrap gives a fuller, more upholstered look. The zippered cover lets you take the fabric off to wash it at the end of the season.
ShapesWhat about curved or contoured O.W. Lee seats?
Many metal frames have curved backs, rounded fronts or cut-outs around arms and posts. Standard rectangles take 2–3 weeks. For curved or notched shapes, trace the seat on paper or send us your old cushion’s outline and email care@fabricakraft.com; custom shapes made from a template take 5–6 weeks.
MeasuringHow to measure O.W. Lee cushions
Order in three steps
Measure each seat and back: width at front and back, depth and thickness. Our measuring guide shows how.
Choose fabric and foam in the builder, or order a swatch first.
We cut to within ±0.5″ of your sizes and remake free if we miss. See our fit guarantee.
Frequently asked questions
Are these official O.W. Lee cushions?
No. Fabrica Kraft makes custom cushions and covers to your measurements so they fit your O.W. Lee furniture. We are not affiliated with, endorsed by or sponsored by O.W. Lee.
Can you make cushions for an O.W. Lee glider or swivel rocker?
Yes. Use our rocking chair cushion builders or the deep seat builder, depending on the seat depth.
What foam is best if my furniture is not covered?
Dryfast. It lets water drain through and dries faster than standard foam.
Can you match curved seat shapes?
Yes. Send a paper template or your old cushion’s outline to care@fabricakraft.com. Custom shapes take 5–6 weeks.
How do the cushions stay in place?
Ties in matching fabric come standard. Velcro is available on request.
Can I see the fabric first?
Yes. Order fabric swatches before you place your order.
O.W. Lee is a trademark of its owner. Fabrica Kraft is not affiliated with, endorsed by or sponsored by O.W. Lee. All trademarks belong to their respective owners and are used only to describe fit.
