Grady-White Boat Seat Cushions

Grady-White builds saltwater fishing and family boats, including center consoles and dual consoles. Seat cushions on any boat take a beating from sun, salt spray and wet gear, and replacing them is one of the simplest ways to make an older hull feel new. We make replacement cushions and covers to the measurements of your seats.

Quick answer

Grady-White replacement cushions: the short answer

Fabrica Kraft makes custom replacement cushions and covers for Grady-White boats from your measurements or a paper template, in Sunbrella with quick-drying Dryfast foam. Every cover has a zipper. Curved bow and coaming cushions are made from templates.

Shop

Build cushions for your Grady-White

On the waterBoat cushions

Seat and bench cushions in marine fabric.

Build yours
Curved shapesFrom a template

Bow, coaming and wraparound cushions.

Build yours
Re-coverCovers only

New zippered covers for existing foam.

Build yours
InsertsCustom foam

Replacement foam cut to size.

Build yours
At a glance

Grady-White boat cushions: key facts

Boats Grady-White center consoles, dual consoles and other models
Cushions Helm and leaning-post seats, bow seating, cockpit benches, backrests
Foam Dryfast (quick-drying) for exposed seating
Fabric Sunbrella in thousands of colours; faux leather also available
Shapes Rectangles in 2–3 weeks; curved shapes from a template in 5–6 weeks
Fit tolerance Within ±0.5″, with a free remake if we miss
Fit

What we make for Grady-White boats

Helm and companion seat cushions
Bow seating cushions and backrests
Cockpit bench and transom seat cushions
Covers only, to re-cover cushions you want to keep
Cut foam for re-stuffing worn cushions
Foam

Which foam works on an open boat?

Choose Dryfast. It has an open structure that lets water run straight through instead of soaking in, so a cushion that takes spray or a rain shower dries out much faster than standard foam. That matters on a boat where cushions stay aboard and rarely get stored dry.

Measuring

How do I measure Grady-White seats?

Rectangles: length, width and thickness at the thickest point.
Tapered or curved cushions: lay the cushion on kraft paper, trace it and mark the top side.
Mark any cut-outs for cup holders, rod holders or hardware on the template.
Note how each cushion attaches today and where.

For curved bow sets, email care@fabricakraft.com before you trace and we will tell you what to send. Our measuring guide covers the basics.

Covers

Can I keep my old cushions and just re-cover them?

Yes, if the foam is still sound. Covers only are cut to the cushion measurements and close with a zipper. If your cushions are fastened with snaps or built around a base board, email us before ordering so we can talk through how the new covers will attach. For more marine options, see our pontoon and center console cushions.

How it works

Order in three steps

1

Measure each cushion, or trace curved ones on paper. Our measuring guide shows how.

2

Choose fabric and foam in the builder, or order a swatch first.

3

We cut to within ±0.5″ of your sizes and remake free if we miss. See our fit guarantee.

FAQ

Frequently asked questions

Are these official Grady-White cushions?

No. Fabrica Kraft makes custom cushions to your measurements so they fit your Grady-White boat. We are not affiliated with, endorsed by or sponsored by Grady-White Boats.

What foam should I choose for boat seats?

Dryfast. It drains and dries quickly, which suits seats exposed to spray and rain.

Can you match the curved bow cushions?

Yes. Trace each cushion on paper and send the templates. Template orders take 5–6 weeks.

How do the cushions attach?

Ties in matching fabric are standard and Velcro is available on request. If your seats use snaps, email us before ordering.

Can I order a single cushion?

Yes. There is no minimum order.

Grady-White is a trademark of its owner. Fabrica Kraft is not affiliated with, endorsed by or sponsored by Grady-White. All trademarks belong to their respective owners and are used only to describe fit.