Bedroom Curtains
A ready-made panel is usually the wrong width or drop for a bedroom window, and the gaps it leaves are where light gets in. Every curtain here is cut to the size you enter, so it can wrap past the frame and reach the floor.
How to get a darker bedroom
- Add the blackout lining. Our 100% blackout lining goes on any indoor drapery or velvet panel. It isn't offered on sheers.
- Go wider than the window. Most light gets in around a curtain, not through it. Extend the rod past the frame and choose panels that together are 1.5–2× the rod width, so they overlap in the middle.
- Go to the floor. Floor-length panels stop light spilling under the hem.
- Mount the rod higher. A rod above the frame, closer to the ceiling, cuts the gap at the top.
Which fabric for a bedroom?
- Blackout drapery: Warwick printed drapery with the blackout lining, for the darkest room.
- Velvet: a dense pile that blocks more light than most woven fabrics and softens sound. Add blackout lining for a fully dark room.
- Sheers: hang them on the inner rod of a double rod for privacy by day, with blackout or velvet panels in front for night.
Which heading?
Pinch pleat gives tailored folds and stacks neatly on rings or a track. Back tab hides the rod for a clean look. Grommet slides most easily if you open the curtains every morning. All are chosen in the builder on each fabric page.
Questions about bedroom curtains
Do blackout curtains make a room completely dark?
The lining blocks light through the fabric. How dark the room gets depends on the gaps at the sides, top and bottom, which is why width, rod height and floor length matter.
Can I have sheers and blackout curtains together?
Yes. Use a double rod: sheers on the back rod, lined drapery or velvet on the front.
How do I measure a bedroom window?
Use our guide to measuring for curtains or the curtain size calculator.







