Wilson & Fisher Replacement Cushions

Wilson & Fisher patio sets are popular for the price, but the original cushions often flatten or fade within a few seasons. We make replacement cushions to the exact size of your Wilson & Fisher seating, in Sunbrella fabric with outdoor foam, so the set lasts as long as the frame.

Shop

Build cushions to fit your Wilson & Fisher furniture

Seat & backChair cushions

Dining, club and lounge chairs, with ties or without.

Build yours
Sofas & sectionalsDeep seat cushions

Deep seating, loveseats and sectional pieces.

Build yours
LoungingChaise cushions

Full-length chaise lounge pads, hinged or one piece.

Build yours
Verandah & gliderSwing cushions

Verandah swings, gliders and daybeds.

Build yours
Fit

What we make for Wilson & Fisher furniture

Deep seating, sofa and sectional cushions
Dining and club chair seat and back cushions
Chaise lounge cushions
Glider, swing and loveseat cushions
Cushion covers only, if your foam is still good
How it works

Order in three steps

1

Measure your existing Wilson & Fisher cushion: width at the front and back, depth, thickness, and where any ties or zippers sit. Our measuring guide shows how.

2

Choose your fabric and foam in the builder. Not sure about colour? Order a swatch first.

3

We cut your cushions to within ±13 mm of your measurements and ship in 2–3 weeks.

Why replace

Better than the original

Sunbrella fabric is solution-dyed, so the colour goes all the way through the fibre and resists fading in the sun.
Choose quick-drying Dry Fast foam so cushions drain after rain.
Match your original colour or pick a new one. Order a swatch first.
One cushion or a full set, with no minimum order.
More

Upgrading budget patio cushions

Original cushions on value patio sets often use thin polyester covers and soft fill. Switching to Sunbrella and a firmer foam makes the biggest difference to how the set looks after a season in the sun.

Measure the frame as well as the old cushion: thin cushions compress, and the frame gives the truer size.

FAQ

Frequently asked questions

Are these official Wilson & Fisher cushions?

No. Fabrica Kraft makes custom cushions to your measurements so they fit your Wilson & Fisher furniture. We are not affiliated with Wilson & Fisher.

Will they fit my Wilson & Fisher patio set?

Yes, as long as you send the measurements of your existing cushions or frame. We cut to within ±13 mm of your sizes, and if a cushion arrives outside that, we remake it. See our fit guarantee.

Can you copy an unusual shape?

Yes. T-shaped, rounded, angled and notched cushions are all possible. Email care@fabricakraft.com with a photo and your measurements.

How long does it take?

Most orders ship in 2–3 weeks. Custom shapes from a template take 5–6 weeks.

Fabrica Kraft is not affiliated with or endorsed by Wilson & Fisher. All trademarks belong to their respective owners and are used only to describe fit.