Hanover Replacement Cushions

Hanover patio sets, including popular collections such as Ventura and Strathmere, are built around cushions that eventually fade or flatten long before the frames wear out. We make replacement cushions to the exact size of your Hanover seating, in Sunbrella fabric with outdoor foam.

Shop

Build cushions to fit your Hanover furniture

Seat & backChair cushions

Dining, club and lounge chairs, with ties or without.

Build yours
Sofas & sectionalsDeep seat cushions

Deep seating, loveseats and sectional pieces.

Build yours
LoungingChaise cushions

Full-length chaise lounge pads, hinged or one piece.

Build yours
Verandah & gliderSwing cushions

Verandah swings, gliders and daybeds.

Build yours
Fit

What we make for Hanover furniture

Deep seating, sofa and sectional cushions
Dining and club chair seat and back cushions
Chaise lounge cushions
Glider, swing and loveseat cushions
Cushion covers only, if your foam is still good
How it works

Order in three steps

1

Measure your existing Hanover cushion: width at the front and back, depth, thickness, and where any ties or zippers sit. Our measuring guide shows how.

2

Choose your fabric and foam in the builder. Not sure about colour? Order a swatch first.

3

We cut your cushions to within ±13 mm of your measurements and ship in 2–3 weeks.

Why replace

Better than the original

Sunbrella fabric is solution-dyed, so the colour goes all the way through the fibre and resists fading in the sun.
Choose quick-drying Dry Fast foam so cushions drain after rain.
Match your original colour or pick a new one. Order a swatch first.
One cushion or a full set, with no minimum order.
More

Replacing cushions on Hanover sets

Many Hanover conversation and sectional sets use deep seat cushions with separate back cushions. Measure each piece separately, because corner and armless sections are often different sizes even within one set.

If the original cushions have a T-shape or a rounded front edge, trace one on paper and send a photo so we can match the shape.

FAQ

Frequently asked questions

Are these official Hanover cushions?

No. Fabrica Kraft makes custom cushions to your measurements so they fit your Hanover furniture. We are not affiliated with Hanover.

Will they fit my Hanover furniture?

Yes, as long as you send the measurements of your existing cushions. We cut to within ±13 mm of your sizes, and if a cushion arrives outside that, we remake it. See our fit guarantee.

Can you copy an unusual shape?

Yes. T-shaped, rounded, angled and notched cushions are all possible. Email care@fabricakraft.com with a photo and your measurements.

How long does it take?

Most orders ship in 2–3 weeks. Custom shapes from a template take 5–6 weeks.

Do you have Hanover Ventura or Strathmere cushion sizes on file?

No. Sizes vary across production years, so measure your own cushions and we make them to those numbers.

Fabrica Kraft is not affiliated with or endorsed by Hanover. All trademarks belong to their respective owners and are used only to describe fit.