A 29″ × 29″ seat cushion fits extra-deep sofas, sectionals and lounge chairs. At this size a thicker cushion keeps the seat from feeling flat, and Dry Fast foam keeps it usable after rain. We cut every cushion to order, so you get the exact size your frame needs, not the nearest stock size.
At a glance29″ × 29″ outdoor cushions
Fits extra-deep sofas, sectionals and lounge chairs.
Pick any thickness up to 8″ in the builder.
Drains straight through after rain. High Density suits covered patios.
Check your size
Order in three steps
Open the builder. Your 29″ × 29″ size and a 5″ thickness are filled in; change anything you need.
Pick a Sunbrella colour and your foam, or choose cover only. Not sure on colour? Order a swatch.
We cut and sew your cushion to order, usually within 6 mm of your size, and ship it free.
Shop by size
Questions
Is 29x29 a standard outdoor cushion size?
It is a common size for extra-deep seating, but frames vary by brand. Measure your frame and enter the exact size; we cut in ¼″ steps.
Can I get just a 29x29 cover?
Yes. Order cover only to fit foam you already have.
What if my cushion arrives the wrong size?
We usually cut within 6 mm of the size you order. Our maximum tolerance is ±25 mm on length and width (±38 mm for cushions of 0.55 m² or more) and ±13 mm on thickness; if a cushion is outside that, we remake it free under our fit guarantee.
Should a 29x29 cushion be thicker?
Usually 5″ to 6″. A large seat with a thin cushion tends to feel hard and bottoms out sooner.
