Sun Tracker pontoons, including fishing models like the Bass Buggy, spend long days in sun and spray, and the seating usually shows it first. If the foam is still sound, new covers can bring the seats back. If it has gone soft or soggy, we can make the whole cushion again. Either way, we work from your measurements so the new pieces fit your layout.
Quick answerSun Tracker seat covers and cushions: the short answer
Fabrica Kraft makes replacement covers only, foam only, or complete cushions for Sun Tracker lounge seats, benches and loose cushions. Choose marine fabric and Dryfast foam that drains and dries fast; we cut within ±13 mm of your sizes, and every cover has a zipper so it comes off for cleaning.
Build seat covers and cushions for your Sun Tracker
Sun Tracker seat cushions and covers: key facts
| Boats | Sun Tracker pontoon and fishing pontoon boats |
|---|---|
| Options | Covers only, foam only, or complete cushions |
| Best foam | Dryfast, which drains and dries quickly on open decks |
| Closures | Zipper on every cover; matching fabric ties standard, Velcro on request |
| Fit | Within ±13 mm of your measurements; free remake if we miss |
| Lead time | Standard shapes 2–3 weeks; curved or angled seats from a template 5–6 weeks |
What we make for Sun Tracker boats
Should I order covers only or new cushions?
Press firmly on the seat and let go. If the foam springs back and feels dry inside, covers only is usually enough. If it stays dented, crumbles at the edges or holds water, replace the foam too. Covers only works for cushions that lift off the boat as loose pieces. If your seat foam is fixed to a base, email care@fabricakraft.com with photos and we'll tell you what we can make.
MeasuringHow do I measure pontoon lounge seats?
Remove each cushion and measure it flat on the dock or a table. Pontoon layouts often mix rectangles with angled pieces, so measure and number every piece.
What fabric holds up on a pontoon?
Sunbrella outdoor and marine fabrics are a popular choice for boat seating, and they come in many colours to match the boat's trim. Pair them with Dryfast foam so rain and splash drain through instead of soaking in. For more on boat seating layouts, see our pontoon and center console cushion guide.
How it worksOrder in three steps
Measure each Sun Tracker cushion flat, and trace any angled piece. Our measuring guide shows how.
Choose fabric and foam in the builder, or order a swatch first.
We cut to within ±13 mm of your sizes and remake free if we miss. See our fit guarantee.
Frequently asked questions
Are these official Sun Tracker cushions?
No. Fabrica Kraft makes custom cushions to your measurements so they fit your Sun Tracker boat. We are not affiliated with, endorsed by or sponsored by Sun Tracker.
Can I order only the covers?
Yes. Covers only fits loose cushions whose foam is still in good shape. Measure the foam and we sew a zippered cover to that size.
Which foam is best on a boat?
Dryfast. It lets water drain through and dries quickly, which suits open decks and boats.
Can you match an angled bow seat?
Yes. Trace the cushion on paper and email care@fabricakraft.com. Template shapes take 5–6 weeks.
Do the cushions come with non-slip backing?
No. Ties in matching fabric come standard, and Velcro is available on request.
Is there a minimum order?
No. You can replace a single seat or the whole layout.
Sun Tracker and Bass Buggy are trademarks of their owner. Fabrica Kraft is not affiliated with, endorsed by or sponsored by Sun Tracker. All trademarks belong to their respective owners and are used only to describe fit.
