Meadowcraft wrought iron chairs, gliders and settees are heavy, sturdy pieces that many families keep on the verandah for decades, and you will often find vintage ones passed down or picked up secondhand. The iron usually outlives the cushions by a long way. We make new seat and back cushions to your measurements, so an old glider or dining set can be comfortable again without hunting for an exact original.
Quick answerReplacement cushions for Meadowcraft wrought iron furniture: the short answer
Fabrica Kraft makes replacement cushions that fit Meadowcraft wrought iron chairs, gliders, settees and chaises, cut to your measurements within ±13 mm. Pick Sunbrella or Warwick outdoor fabric and a foam that suits your verandah or patio. Standard shapes ship in 2–3 weeks.
Build cushions to fit your Meadowcraft furniture
Meadowcraft replacement cushions: key facts
| Furniture | Wrought iron dining chairs, club chairs, gliders, settees and chaise lounges |
|---|---|
| Typical shapes | Rectangles, seats tapered front to back, and curved backs |
| Fabrics | Sunbrella and Warwick outdoor fabrics in 5,000+ colours |
| Foam | Lux-R (firm) or HD36-R (medium); Dryfast for open patios |
| Attachments | Ties in matching fabric standard; Velcro on request |
| Lead time | 2–3 weeks standard; 5–6 weeks for custom shapes from a template |
What we make for Meadowcraft furniture
How do I measure a wrought iron glider for a cushion?
Measure the seat width from the inside of one arm to the inside of the other, at the front and again at the back, since many gliders are a little narrower at the back. Then measure depth from the front edge to the back rail. If the back has a curved top or the arms flare, lay paper on the seat, trace the outline and email a photo or the template to care@fabricakraft.com.
Iron framesKeeping cushions in place on iron furniture
Which foam works on an open patio?
If your Meadowcraft set sits in the open and catches rain, Dryfast foam lets water drain through and dries quickly. On a covered verandah, Lux-R gives a firm seat and HD36-R a medium one, and an optional Dacron wrap softens the top and fills out the cover. All of our foam is CertiPUR-US certified.
How it worksOrder in three steps
Measure each seat's width at the front and back, depth and thickness. Our measuring guide shows how.
Choose fabric and foam in the builder, or order a swatch first.
We cut to within ±13 mm of your sizes and remake free if we miss. See our fit guarantee.
Frequently asked questions
Are these official Meadowcraft cushions?
No. Fabrica Kraft makes custom cushions to your measurements so they fit your Meadowcraft furniture. We are not affiliated with, endorsed by or sponsored by Meadowcraft.
Can you match the curved back of my iron chair?
Yes. Trace the back on paper and send the template or photos to care@fabricakraft.com. Custom shapes from a template take 5–6 weeks.
Do you make cushions for vintage Meadowcraft gliders?
Yes. We work from your measurements, so the age of the glider does not matter. Use the bench cushion builder for a long seat.
Can I order covers only?
Yes. If your foam is still supportive, order covers only in Sunbrella. Every cover has a zipper.
Is there a minimum order?
No. You can order a single chair cushion.
How long does it take?
Standard shapes ship in 2–3 weeks.
Meadowcraft is a trademark of its owner. Fabrica Kraft is not affiliated with, endorsed by or sponsored by Meadowcraft. All trademarks belong to their respective owners and are used only to describe fit.
