Bunnings Outdoor Furniture Replacement Cushions

Outdoor settings from Bunnings are built to be used, and after a few Australian summers the cushions usually go first. We make replacement cushions to the exact size of your Bunnings outdoor lounge, dining setting or sun lounger, so you can keep the frame and refresh the seat.

Shop

Build cushions to fit your Bunnings outdoor furniture

Seat & backChair cushions

Dining chairs, armchairs and recliners, with ties as standard.

Build yours
Lounges & modularsOutdoor lounge cushions

Deep seats, backs and corner pieces for lounges and modular settings.

Build yours
PoolsideSun lounger cushions

Full-length sun lounger and daybed cushions, hinged or one piece.

Build yours
Fit

What we make for Bunnings outdoor furniture

Outdoor lounge and modular setting cushions, seats and backs
Dining chair seat pads and seat-and-back cushions
Sun lounger and daybed cushions
Bench and swing seat cushions
Covers only for foam you already have, or replacement foam only
Keep the frame

Replacement cushions for Bunnings outdoor settings

Bunnings sells outdoor furniture under its own ranges, including Mimosa and Marquee, alongside other brands. Replacement cushions for a specific setting are often hard to find once a range changes, so the practical answer is cushions made to the measurements of the ones you have.

Most worn outdoor cushions fail in the same three ways: the foam flattens at the front edge, the fabric fades on the side that faces the sun, and the foam holds water after rain. Sunbrella covers with quick-drain Dryfast foam fix all three, and you can make the cushions thicker than the originals if you would like a softer sit.

How it works

Order in three steps

1

Measure your Bunnings outdoor cushions in millimetres: width at the front and back, depth, thickness, and where any ties sit. Our measuring guide shows how.

2

Choose your fabric and foam in the builder. Not sure about colour? Order swatches first; the cost comes back as a code on your order.

3

We cut your cushions to within ±13 mm of your sizes and make them in 2–3 weeks. Delivery within Australia is free.

Why replace

Built for the Australian sun

Sunbrella fabric is solution-dyed, so the colour runs through the fibre and resists fading under strong Australian UV
Dryfast foam lets rain and pool water drain straight through, and foam for Australian orders is made in Australia by our partner Premier Group
Zipped, removable covers, with matching fabric ties as standard
One cushion or a full setting, with no minimum order
FAQ

Frequently asked questions

Are these official Bunnings cushions?

No. Fabrica Kraft makes custom cushions to your measurements so they fit furniture bought from Bunnings. We are not affiliated with Bunnings.

Will the cushions fit my Mimosa or Marquee setting?

Yes, as long as you send the measurements of your existing cushions. We cut every cushion to your sizes, so the range and model do not matter.

What if a cushion doesn't fit?

We cut within ±13 mm of the sizes you order. If a cushion arrives outside that, we remake it free. See our warranty and fit guarantee.

Can I just replace the covers?

Yes. Every builder offers cover only. Measure your existing foam edge to edge, not the old cover.

How long does it take?

Standard shapes take 2–3 weeks to make and template shapes 5–6 weeks. Delivery within Australia is free.

Fabrica Kraft is not affiliated with or endorsed by Bunnings. Mimosa and Marquee are trademarks of their owners. Names are used only to describe fit.

Shop the full range