Bennington Pontoon Seat Cushions

Pontoon seating takes sun, spray and wet swimsuits every weekend, so the cushions usually wear out long before the boat. We make replacement seat and back cushions to the exact size of your Bennington pontoon seating, in marine vinyl or Sunbrella with quick-drying foam.

Shop

Build cushions for your Bennington

MarineBoat cushions

Lounge, bow, helm and back cushions.

Build yours
Any shapeCustom cushion

Curved, angled and notched pieces.

Build yours
PontoonsPontoon guide

Layouts, fabrics and foam for pontoon seating.

Read more
Fit

What we make for Bennington pontoons

Lounge and couch seat cushions
Back cushions and bolsters
Bow and corner seat cushions
Helm and companion seat cushions
Sun pad and lounger cushions
On the water

Choosing fabric and foam for a pontoon

Marine vinyl wipes clean and sheds water, which suits seats that get sat on straight out of the lake. Sunbrella is softer and cooler in the sun and resists fading. Either way, choose Dryfast foam: it lets water drain straight through, so the cushion dries quickly instead of holding water.

Pontoon seating is full of curved corners and angled ends. Measure each cushion on its own, and for any piece that is not a simple rectangle, trace it on paper and send it as a template. Note where snaps or fasteners sit so the new cushions line up with the existing hardware.

How it works

Order in three steps

1

Measure each cushion: width, depth and thickness, or trace curved pieces as a template. Our measuring guide shows how.

2

Choose marine vinyl or Sunbrella and Dryfast foam in the builder. Not sure about colour? Order a swatch first.

3

We cut your cushions to within 13 mm (maximum ±25 mm) of your measurements. Standard shapes ship in 2–3 weeks, template shapes in 5–6 weeks.

FAQ

Frequently asked questions

Are these official Bennington cushions?

No. Fabrica Kraft makes custom cushions to your measurements so they fit your Bennington pontoon. We are not affiliated with Bennington.

Which foam is best for a pontoon?

Dryfast foam. It drains and dries much faster than standard foam.

Can you match curved corner cushions?

Yes. Trace the old cushion on paper and email a photo with your measurements to care@fabricakraft.com.

What if a cushion doesn't fit?

We cut within 13 mm (maximum ±25 mm) of the sizes you order. If a cushion arrives outside that, we remake it free. See our fit guarantee.

Fabrica Kraft is not affiliated with or endorsed by Bennington. All trademarks belong to their respective owners and are used only to describe fit.