{"product_id":"custom-wedge-bolster-cushion","title":"Custom Wedge Bolster Cushion, Sunbrella or Warwick","description":"\u003cdiv class=\"fk-tldr\"\u003e\n\u003cstrong\u003eQuick answer\u003c\/strong\u003e Wedge bolster cushions made to your exact length, height and top and bottom thickness, with a flat back and a sloped front. For daybed and swing bed backs, window seats, chaise headrests, sofa arms, lumbar support and leg rests. Sunbrella for outdoors, Warwick for indoors. Cut within ¼″ (maximum ±1″) and ships in 2–3 weeks.\u003c\/div\u003e\n\u003cp\u003eA wedge bolster gives angled support where a round bolster would roll away. It has a flat back that rests against the wall or frame, a flat base and a narrower top, so the front slopes back at a comfortable angle. We make each one to your four measurements, in Sunbrella for outdoors or Warwick for indoors, with a zippered cover.\u003c\/p\u003e\n\u003ch2\u003eWhere to use a wedge bolster\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDaybeds and swing beds:\u003c\/strong\u003e a long wedge along the back turns a mattress into a sofa you can sit up on.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWindow seats and banquettes:\u003c\/strong\u003e back support where there is no backrest, without hiding the window.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChaise lounges:\u003c\/strong\u003e a short wedge as a headrest or neck support.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSofa and sectional arms:\u003c\/strong\u003e a firmer, flat-sided arm bolster that stays put.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLumbar support:\u003c\/strong\u003e a small wedge behind the lower back on a bench or lounge chair.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeg rests:\u003c\/strong\u003e a deep, low wedge to raise your legs on a lounger or bed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to measure\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e end to end along the furniture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e from the bottom of the wedge to the top of the back. For a back cushion, measure from the top of the seat cushion, not the frame, or it will sit too tall.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTop thickness:\u003c\/strong\u003e front to back at the top.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBottom thickness:\u003c\/strong\u003e front to back at the base, where it sits on the seat. This is the same as the top thickness or more.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eRound to the nearest ¼″. Either the height or the bottom thickness can be up to 12″; the other can go up to 30″ high or 24″ thick. Replacing an old wedge? Measure the foam, or the cover seam to seam, not the bulge. Not sure? Send us a photo and your measurements before you order and we'll check them.\u003c\/p\u003e\n\u003ch2\u003eWhat you choose\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLength, height, top thickness and bottom thickness\u003c\/li\u003e\n\u003cli\u003eFabric: any Sunbrella (outdoor) or Warwick (indoor) color\u003c\/li\u003e\n\u003cli\u003eFoam and Dacron wrap, or cover only\u003c\/li\u003e\n\u003cli\u003ePiping and ties\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFabric and foam\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutdoors:\u003c\/strong\u003e Sunbrella, solution-dyed acrylic that resists fading, mildew and stains.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndoors:\u003c\/strong\u003e Warwick upholstery fabrics, velvet and more.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDryfast foam\u003c\/strong\u003e for anything that lives outside: open-cell, so rain drains straight through.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Density (HD36-R)\u003c\/strong\u003e foam for indoor wedges: a medium feel that holds its angle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLuxury (Lux-R)\u003c\/strong\u003e foam if you want a firmer back rest.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe foam is cut to the wedge shape from solid foam and wrapped in Dacron so the cover fills out crisply. Every cover has a zipper, so you can take it off to clean it.\u003c\/p\u003e\n\u003ch2\u003eQuestions about wedge bolsters\u003c\/h2\u003e\n\u003ch3\u003eWhat is the difference between a wedge bolster and a round bolster?\u003c\/h3\u003e\n\u003cp\u003eA round bolster is a roll with round ends. A wedge bolster has a flat base and a sloped face, so it sits still and supports your back at an angle. Use a wedge for back rests and leg rests, and a \u003ca href=\"\/en-gb\/products\/custom-bolster-cushion\"\u003eround bolster\u003c\/a\u003e for sofa arms and neck rolls.\u003c\/p\u003e\n\u003ch3\u003eWhat size wedge do I need for a daybed?\u003c\/h3\u003e\n\u003cp\u003eFor a twin daybed back, a good starting point is the length of the mattress (about 75″), 18–20″ high, 10″ thick at the bottom and 3–4″ at the top. Measure your own frame: the length should match the mattress, and the height is measured from the top of the mattress to just below the top of the backrest.\u003c\/p\u003e\n\u003ch3\u003eCan a wedge bolster go outside?\u003c\/h3\u003e\n\u003cp\u003eYes. Choose Sunbrella fabric and Dryfast foam. Warwick fabrics are for indoor use.\u003c\/p\u003e\n\u003ch3\u003eCan I order matching wedges for a set?\u003c\/h3\u003e\n\u003cp\u003eYes. Build one, add it to the cart, then change the size for the next one. They will match in fabric and foam.\u003c\/p\u003e\n\u003ch3\u003eCan you copy my old wedge cushion?\u003c\/h3\u003e\n\u003cp\u003eYes. Measure the old foam or cover and enter those sizes. If it has an unusual shape, tell us in the notes box or email us a photo before you order.\u003c\/p\u003e\n\u003ch3\u003eWhat if it doesn't fit?\u003c\/h3\u003e\n\u003cp\u003eWe cut most cushions to within ¼″ of your measurements, and our maximum tolerance is ±1″ on length and width (±1½″ for 6 sq ft or more) and ±½″ on thickness. If it arrives outside that, we remake it free.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFit guarantee:\u003c\/strong\u003e we cut most cushions to within ¼″ of the measurements you send. Our maximum manufacturing tolerance is ±1″ on length and width (±1½″ for cushions of 6 sq ft or more) and ±½″ on thickness. If yours arrives outside that tolerance, we remake it free. See our \u003ca href=\"\/en-gb\/pages\/warranty\"\u003ewarranty and fit guarantee\u003c\/a\u003e.\u003c\/p\u003e\n","brand":"Fabrica Kraft","offers":[{"title":"Default Title","offer_id":68312065736939,"sku":null,"price":140.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/9018\/5451\/files\/hf_20261029_182457_ad5bc690-065e-4d1d-9c3c-5046c18b6153.png?v=1793298330","url":"https:\/\/www.fabricakraft.com\/en-gb\/products\/custom-wedge-bolster-cushion","provider":"Fabrica Kraft ","version":"1.0","type":"link"}