{"title":"Warwick Highlands Collection","description":"\u003cp\u003eWarwick Highlands is an indoor upholstery fabric from the Australian design house Warwick. We carry 7 colors, including Alabaster, Blue, Charcoal and Green, in stock for custom cushions on window seats, benches, dining chairs and sofas, as well as pillows and table runners.\u003c\/p\u003e\u003cp\u003eHighlands is a woven check with a wool-look texture and a heritage feel. Shades like Rouge and Taupe suit a cabin bench, while Terracotta works well on a study window seat. Like every Warwick fabric we carry, Highlands is made for indoor rooms, so keep it out of rain and harsh direct sun.\u003c\/p\u003e\u003cp\u003eFor Highlands, start with the \u003ca href=\"\/en-ca\/products\/custom-window-seat-cushion-sunbrella\"\u003ewindow seat cushion builder\u003c\/a\u003e for a bay or nook, or the \u003ca href=\"\/en-ca\/products\/custom-l-shaped-cushion\"\u003eL-shaped cushion builder\u003c\/a\u003e for a corner banquette. Browse more \u003ca href=\"\/en-ca\/collections\/warwick-upholstery\"\u003eWarwick upholstery\u003c\/a\u003e, and \u003ca href=\"\/en-ca\/pages\/fabric-swatches\"\u003eorder swatches\u003c\/a\u003e if you want to check the texture before you order.\u003c\/p\u003e\u003ch2\u003eQuestions about Warwick Highlands\u003c\/h2\u003e\u003ch3\u003eCan I use Warwick Highlands outside?\u003c\/h3\u003e\u003cp\u003eNo. Like every Warwick fabric we carry, Highlands is made for indoor rooms. For a porch, deck or pool area, choose a Sunbrella fabric, which is solution-dyed and made for sun and rain.\u003c\/p\u003e\u003ch3\u003eWhat can I make from Warwick Highlands?\u003c\/h3\u003e\u003cp\u003eHighlands works for seat and back cushions on window seats, banquettes and sofas, and it suits a cabin bench or a study window seat too. It also makes throw pillows and bolsters. There is no minimum order, and you can buy the cover only, the foam only or the complete cushion.\u003c\/p\u003e\u003ch3\u003eHow do I clean Warwick Highlands?\u003c\/h3\u003e\u003cp\u003eKeep Highlands fresh by vacuuming with an upholstery brush and blotting spills before they set. Covers unzip, so they can go out for professional cleaning; read the care label before any washing.\u003c\/p\u003e","products":[{"product_id":"warwick-highlands-alabaster","title":"Warwick Highlands Alabaster Custom Indoor Cushion","description":"\u003cp\u003ePicture an alabaster off-white on your favorite seat. That is \u003cstrong\u003eWarwick Highlands Alabaster\u003c\/strong\u003e, a woven tartan check. It works as a quiet base for colorful pillows. We like it for a piano bench, kitchen chair pads and a breakfast nook banquette. Pair it with black iron and pale blue accents. Your cushion is made to your measurements, filled with the foam you pick.\u003c\/p\u003e\n\u003cp\u003eA marled, yarn-dyed tartan check with a cozy, chunky weave. It suits rustic or lodge-style interiors. Warwick rates Highlands for heavy commercial upholstery use, tested to 90,000 Martindale rubs. It comes with Warwick's Halo easy-clean finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial Composition\u003c\/strong\u003e - 100% Polyester\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing your foam (3-year foam warranty)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Density:\u003c\/strong\u003e a medium feel for everyday seats, chairs and mattresses. 1.8 lb\/ft³ density, 35 lb ILD, lasts about 7 years. For thin dining seats (1″–2″), Luxury foam holds up better.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLuxury:\u003c\/strong\u003e firm, and firmer as it gets thicker (7″–8″ feels very firm unless you weigh over 200 lb). 1.8 lb\/ft³, 50 lb ILD, lasts about 5–8 years. A good pick for dining seats from 1″ to 3″.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Fast:\u003c\/strong\u003e open-cell outdoor foam that lets water drain straight through, for patio, pool and boat cushions. Firm, 1.8 lb\/ft³, 60 lb ILD, lasts about 5–8 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Soft:\u003c\/strong\u003e for sofa back cushions and mattress toppers only, not seats. 1.2 lb\/ft³, 12 lb ILD, lasts about 5 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDacron wrap (optional):\u003c\/strong\u003e a 1″ layer of polyester fiberfill around the foam that rounds the edges and fills the cover. We attach it with fine staples that won't tear the foam or the cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber fill:\u003c\/strong\u003e loose 100% polyester filling for back cushions you want to sink into. Not for seats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEntering your size\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnter every measurement in inches.\u003c\/li\u003e\n\u003cli\u003eSizes between quarter inches are rounded up to the next ¼″.\u003c\/li\u003e\n\u003cli\u003eGive us the finished cushion size. If you add a Dacron wrap, don't make the numbers smaller; we allow for the wrap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePiping and ties\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePiping is a fabric-covered cord sewn into the edge seams. It gives the cushion a neat, defined edge and helps it keep its shape. Ties hold the cushion to the chair frame so it doesn't slide. If you need ties somewhere the options don't cover, \u003ca href=\"mailto:care@fabricakraft.com\"\u003eemail us\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThick cushions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe cut foam up to 6″ thick from one solid piece. From over 6″ to 8″, we glue two layers of the same foam together at no extra charge. For anything over 8″, or to mix two foam types in one cushion, \u003ca href=\"\/en-ca\/pages\/contact\"\u003econtact us\u003c\/a\u003e for a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturing Tolerances\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor custom orders, we cut to within ±0.5″ of your measurements.\u003c\/p\u003e","brand":"Warwick","offers":[{"title":"Default Title","offer_id":67893005877483,"sku":"Highlands Alabaster","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/9018\/5451\/files\/FHI22ALAB.jpg?v=1791352623"},{"product_id":"warwick-highlands-blue","title":"Warwick Highlands Blue Custom Indoor Cushion","description":"\u003cp\u003eInspired by Scottish tartan, \u003cstrong\u003eWarwick Highlands Blue\u003c\/strong\u003e is a yarn-dyed check in blue tones with an 18 cm repeat. It feels cozy on a cabin window seat, a mudroom bench, or a banquette in a country kitchen. Pair it with warm oak, aged brass, and cream walls, plus plain navy or camel pillows. Your cushion is made to your exact size with the foam you pick.\u003c\/p\u003e\n\u003cp\u003eA marled, yarn-dyed tartan check with a cozy, chunky weave. It suits rustic or lodge-style interiors. Warwick rates Highlands for heavy commercial upholstery use, tested to 90,000 Martindale rubs. It comes with Warwick's Halo easy-clean finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial Composition\u003c\/strong\u003e - 100% Polyester\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing your foam (3-year foam warranty)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Density:\u003c\/strong\u003e a medium feel for everyday seats, chairs and mattresses. 1.8 lb\/ft³ density, 35 lb ILD, lasts about 7 years. For thin dining seats (1″–2″), Luxury foam holds up better.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLuxury:\u003c\/strong\u003e firm, and firmer as it gets thicker (7″–8″ feels very firm unless you weigh over 200 lb). 1.8 lb\/ft³, 50 lb ILD, lasts about 5–8 years. A good pick for dining seats from 1″ to 3″.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Fast:\u003c\/strong\u003e open-cell outdoor foam that lets water drain straight through, for patio, pool and boat cushions. Firm, 1.8 lb\/ft³, 60 lb ILD, lasts about 5–8 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Soft:\u003c\/strong\u003e for sofa back cushions and mattress toppers only, not seats. 1.2 lb\/ft³, 12 lb ILD, lasts about 5 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDacron wrap (optional):\u003c\/strong\u003e a 1″ layer of polyester fiberfill around the foam that rounds the edges and fills the cover. We attach it with fine staples that won't tear the foam or the cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber fill:\u003c\/strong\u003e loose 100% polyester filling for back cushions you want to sink into. Not for seats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEntering your size\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnter every measurement in inches.\u003c\/li\u003e\n\u003cli\u003eSizes between quarter inches are rounded up to the next ¼″.\u003c\/li\u003e\n\u003cli\u003eGive us the finished cushion size. If you add a Dacron wrap, don't make the numbers smaller; we allow for the wrap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePiping and ties\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePiping is a fabric-covered cord sewn into the edge seams. It gives the cushion a neat, defined edge and helps it keep its shape. Ties hold the cushion to the chair frame so it doesn't slide. If you need ties somewhere the options don't cover, \u003ca href=\"mailto:care@fabricakraft.com\"\u003eemail us\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThick cushions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe cut foam up to 6″ thick from one solid piece. From over 6″ to 8″, we glue two layers of the same foam together at no extra charge. For anything over 8″, or to mix two foam types in one cushion, \u003ca href=\"\/en-ca\/pages\/contact\"\u003econtact us\u003c\/a\u003e for a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturing Tolerances\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor custom orders, we cut to within ±0.5″ of your measurements.\u003c\/p\u003e","brand":"Warwick","offers":[{"title":"Default Title","offer_id":67893005943019,"sku":"Highlands Blue","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/9018\/5451\/files\/FHI22BLUE.jpg?v=1791352627"},{"product_id":"warwick-highlands-charcoal","title":"Warwick Highlands Charcoal Custom Indoor Cushion","description":"\u003cp\u003eCozy and classic, \u003cstrong\u003eWarwick Highlands Charcoal\u003c\/strong\u003e is a yarn-dyed tartan check in deep charcoal tones. It looks right at home on a cabin window seat, a fireside bench, or a mudroom seat. Pair it with dark wood, leather, and cream wool throws. The 18 cm check reads well on larger cushions. We make it to your exact measurements with the foam you choose.\u003c\/p\u003e\n\u003cp\u003eA marled, yarn-dyed tartan check with a cozy, chunky weave. It suits rustic or lodge-style interiors. Warwick rates Highlands for heavy commercial upholstery use, tested to 90,000 Martindale rubs. It comes with Warwick's Halo easy-clean finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial Composition\u003c\/strong\u003e - 100% Polyester\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing your foam (3-year foam warranty)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Density:\u003c\/strong\u003e a medium feel for everyday seats, chairs and mattresses. 1.8 lb\/ft³ density, 35 lb ILD, lasts about 7 years. For thin dining seats (1″–2″), Luxury foam holds up better.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLuxury:\u003c\/strong\u003e firm, and firmer as it gets thicker (7″–8″ feels very firm unless you weigh over 200 lb). 1.8 lb\/ft³, 50 lb ILD, lasts about 5–8 years. A good pick for dining seats from 1″ to 3″.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Fast:\u003c\/strong\u003e open-cell outdoor foam that lets water drain straight through, for patio, pool and boat cushions. Firm, 1.8 lb\/ft³, 60 lb ILD, lasts about 5–8 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Soft:\u003c\/strong\u003e for sofa back cushions and mattress toppers only, not seats. 1.2 lb\/ft³, 12 lb ILD, lasts about 5 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDacron wrap (optional):\u003c\/strong\u003e a 1″ layer of polyester fiberfill around the foam that rounds the edges and fills the cover. We attach it with fine staples that won't tear the foam or the cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber fill:\u003c\/strong\u003e loose 100% polyester filling for back cushions you want to sink into. Not for seats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEntering your size\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnter every measurement in inches.\u003c\/li\u003e\n\u003cli\u003eSizes between quarter inches are rounded up to the next ¼″.\u003c\/li\u003e\n\u003cli\u003eGive us the finished cushion size. If you add a Dacron wrap, don't make the numbers smaller; we allow for the wrap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePiping and ties\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePiping is a fabric-covered cord sewn into the edge seams. It gives the cushion a neat, defined edge and helps it keep its shape. Ties hold the cushion to the chair frame so it doesn't slide. If you need ties somewhere the options don't cover, \u003ca href=\"mailto:care@fabricakraft.com\"\u003eemail us\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThick cushions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe cut foam up to 6″ thick from one solid piece. From over 6″ to 8″, we glue two layers of the same foam together at no extra charge. For anything over 8″, or to mix two foam types in one cushion, \u003ca href=\"\/en-ca\/pages\/contact\"\u003econtact us\u003c\/a\u003e for a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturing Tolerances\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor custom orders, we cut to within ±0.5″ of your measurements.\u003c\/p\u003e","brand":"Warwick","offers":[{"title":"Default Title","offer_id":67893006041323,"sku":"Highlands Charcoal","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/9018\/5451\/files\/FHI22CHAR.jpg?v=1791352633"},{"product_id":"warwick-highlands-green","title":"Warwick Highlands Green Custom Indoor Cushion","description":"\u003cp\u003eClassic and cozy, \u003cstrong\u003eWarwick Highlands Green\u003c\/strong\u003e is a yarn-dyed tartan check in rich greens. It feels right at home on a cabin window seat, a fireplace bench, or a library reading nook. Pair it with dark wood, brass, and cream or burgundy wool throws. Choose your size and foam, and we will make the cushion just for you.\u003c\/p\u003e\n\u003cp\u003eA marled, yarn-dyed tartan check with a cozy, chunky weave. It suits rustic or lodge-style interiors. Warwick rates Highlands for heavy commercial upholstery use, tested to 90,000 Martindale rubs. It comes with Warwick's Halo easy-clean finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial Composition\u003c\/strong\u003e - 100% Polyester\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing your foam (3-year foam warranty)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Density:\u003c\/strong\u003e a medium feel for everyday seats, chairs and mattresses. 1.8 lb\/ft³ density, 35 lb ILD, lasts about 7 years. For thin dining seats (1″–2″), Luxury foam holds up better.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLuxury:\u003c\/strong\u003e firm, and firmer as it gets thicker (7″–8″ feels very firm unless you weigh over 200 lb). 1.8 lb\/ft³, 50 lb ILD, lasts about 5–8 years. A good pick for dining seats from 1″ to 3″.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Fast:\u003c\/strong\u003e open-cell outdoor foam that lets water drain straight through, for patio, pool and boat cushions. Firm, 1.8 lb\/ft³, 60 lb ILD, lasts about 5–8 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Soft:\u003c\/strong\u003e for sofa back cushions and mattress toppers only, not seats. 1.2 lb\/ft³, 12 lb ILD, lasts about 5 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDacron wrap (optional):\u003c\/strong\u003e a 1″ layer of polyester fiberfill around the foam that rounds the edges and fills the cover. We attach it with fine staples that won't tear the foam or the cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber fill:\u003c\/strong\u003e loose 100% polyester filling for back cushions you want to sink into. Not for seats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEntering your size\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnter every measurement in inches.\u003c\/li\u003e\n\u003cli\u003eSizes between quarter inches are rounded up to the next ¼″.\u003c\/li\u003e\n\u003cli\u003eGive us the finished cushion size. If you add a Dacron wrap, don't make the numbers smaller; we allow for the wrap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePiping and ties\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePiping is a fabric-covered cord sewn into the edge seams. It gives the cushion a neat, defined edge and helps it keep its shape. Ties hold the cushion to the chair frame so it doesn't slide. If you need ties somewhere the options don't cover, \u003ca href=\"mailto:care@fabricakraft.com\"\u003eemail us\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThick cushions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe cut foam up to 6″ thick from one solid piece. From over 6″ to 8″, we glue two layers of the same foam together at no extra charge. For anything over 8″, or to mix two foam types in one cushion, \u003ca href=\"\/en-ca\/pages\/contact\"\u003econtact us\u003c\/a\u003e for a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturing Tolerances\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor custom orders, we cut to within ±0.5″ of your measurements.\u003c\/p\u003e","brand":"Warwick","offers":[{"title":"Default Title","offer_id":67893006106859,"sku":"Highlands Green","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/9018\/5451\/files\/FHI22GREE.jpg?v=1791352636"},{"product_id":"warwick-highlands-rouge","title":"Warwick Highlands Rouge Custom Indoor Cushion","description":"\u003cp\u003eCozy and traditional, \u003cstrong\u003eWarwick Highlands Rouge\u003c\/strong\u003e is a red yarn-dyed tartan check that brings a warm, lodge-style look. Use it on a cabin window seat, a fireside bench, or a mudroom bench that sees winter boots. Pair it with dark wood, cream walls and wool throws. Your cushion is made to your exact size, with the foam you choose.\u003c\/p\u003e\n\u003cp\u003eA marled, yarn-dyed tartan check with a cozy, chunky weave. It suits rustic or lodge-style interiors. Warwick rates Highlands for heavy commercial upholstery use, tested to 90,000 Martindale rubs. It comes with Warwick's Halo easy-clean finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial Composition\u003c\/strong\u003e - 100% Polyester\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing your foam (3-year foam warranty)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Density:\u003c\/strong\u003e a medium feel for everyday seats, chairs and mattresses. 1.8 lb\/ft³ density, 35 lb ILD, lasts about 7 years. For thin dining seats (1″–2″), Luxury foam holds up better.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLuxury:\u003c\/strong\u003e firm, and firmer as it gets thicker (7″–8″ feels very firm unless you weigh over 200 lb). 1.8 lb\/ft³, 50 lb ILD, lasts about 5–8 years. A good pick for dining seats from 1″ to 3″.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Fast:\u003c\/strong\u003e open-cell outdoor foam that lets water drain straight through, for patio, pool and boat cushions. Firm, 1.8 lb\/ft³, 60 lb ILD, lasts about 5–8 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Soft:\u003c\/strong\u003e for sofa back cushions and mattress toppers only, not seats. 1.2 lb\/ft³, 12 lb ILD, lasts about 5 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDacron wrap (optional):\u003c\/strong\u003e a 1″ layer of polyester fiberfill around the foam that rounds the edges and fills the cover. We attach it with fine staples that won't tear the foam or the cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber fill:\u003c\/strong\u003e loose 100% polyester filling for back cushions you want to sink into. Not for seats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEntering your size\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnter every measurement in inches.\u003c\/li\u003e\n\u003cli\u003eSizes between quarter inches are rounded up to the next ¼″.\u003c\/li\u003e\n\u003cli\u003eGive us the finished cushion size. If you add a Dacron wrap, don't make the numbers smaller; we allow for the wrap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePiping and ties\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePiping is a fabric-covered cord sewn into the edge seams. It gives the cushion a neat, defined edge and helps it keep its shape. Ties hold the cushion to the chair frame so it doesn't slide. If you need ties somewhere the options don't cover, \u003ca href=\"mailto:care@fabricakraft.com\"\u003eemail us\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThick cushions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe cut foam up to 6″ thick from one solid piece. From over 6″ to 8″, we glue two layers of the same foam together at no extra charge. For anything over 8″, or to mix two foam types in one cushion, \u003ca href=\"\/en-ca\/pages\/contact\"\u003econtact us\u003c\/a\u003e for a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturing Tolerances\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor custom orders, we cut to within ±0.5″ of your measurements.\u003c\/p\u003e","brand":"Warwick","offers":[{"title":"Default Title","offer_id":67893006205163,"sku":"Highlands Rouge","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/9018\/5451\/files\/FHI22ROUG.jpg?v=1791352641"},{"product_id":"warwick-highlands-taupe","title":"Warwick Highlands Taupe Custom Indoor Cushion","description":"\u003cp\u003eCozy and traditional, \u003cstrong\u003eWarwick Highlands Taupe\u003c\/strong\u003e is a yarn-dyed tartan check in soft taupe tones. It feels right on a fireside bench, a cabin window seat, or a kitchen banquette. Pair it with dark wood, tan leather, and cream or deep green walls. The plaid brings a warm, lodge feel. Your cushion is made to the measurements you send, with the foam you select.\u003c\/p\u003e\n\u003cp\u003eA marled, yarn-dyed tartan check with a cozy, chunky weave. It suits rustic or lodge-style interiors. Warwick rates Highlands for heavy commercial upholstery use, tested to 90,000 Martindale rubs. It comes with Warwick's Halo easy-clean finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial Composition\u003c\/strong\u003e - 100% Polyester\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing your foam (3-year foam warranty)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Density:\u003c\/strong\u003e a medium feel for everyday seats, chairs and mattresses. 1.8 lb\/ft³ density, 35 lb ILD, lasts about 7 years. For thin dining seats (1″–2″), Luxury foam holds up better.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLuxury:\u003c\/strong\u003e firm, and firmer as it gets thicker (7″–8″ feels very firm unless you weigh over 200 lb). 1.8 lb\/ft³, 50 lb ILD, lasts about 5–8 years. A good pick for dining seats from 1″ to 3″.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Fast:\u003c\/strong\u003e open-cell outdoor foam that lets water drain straight through, for patio, pool and boat cushions. Firm, 1.8 lb\/ft³, 60 lb ILD, lasts about 5–8 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Soft:\u003c\/strong\u003e for sofa back cushions and mattress toppers only, not seats. 1.2 lb\/ft³, 12 lb ILD, lasts about 5 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDacron wrap (optional):\u003c\/strong\u003e a 1″ layer of polyester fiberfill around the foam that rounds the edges and fills the cover. We attach it with fine staples that won't tear the foam or the cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber fill:\u003c\/strong\u003e loose 100% polyester filling for back cushions you want to sink into. Not for seats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEntering your size\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnter every measurement in inches.\u003c\/li\u003e\n\u003cli\u003eSizes between quarter inches are rounded up to the next ¼″.\u003c\/li\u003e\n\u003cli\u003eGive us the finished cushion size. If you add a Dacron wrap, don't make the numbers smaller; we allow for the wrap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePiping and ties\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePiping is a fabric-covered cord sewn into the edge seams. It gives the cushion a neat, defined edge and helps it keep its shape. Ties hold the cushion to the chair frame so it doesn't slide. If you need ties somewhere the options don't cover, \u003ca href=\"mailto:care@fabricakraft.com\"\u003eemail us\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThick cushions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe cut foam up to 6″ thick from one solid piece. From over 6″ to 8″, we glue two layers of the same foam together at no extra charge. For anything over 8″, or to mix two foam types in one cushion, \u003ca href=\"\/en-ca\/pages\/contact\"\u003econtact us\u003c\/a\u003e for a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturing Tolerances\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor custom orders, we cut to within ±0.5″ of your measurements.\u003c\/p\u003e","brand":"Warwick","offers":[{"title":"Default Title","offer_id":67893006270699,"sku":"Highlands Taupe","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/9018\/5451\/files\/FHI22TAUP.jpg?v=1791352646"},{"product_id":"warwick-highlands-terracotta","title":"Warwick Highlands Terracotta Custom Indoor Cushion","description":"\u003cp\u003eShown here in a warm terracotta, \u003cstrong\u003eWarwick Highlands Terracotta\u003c\/strong\u003e is a woven tartan check. It brings an earthy, sunny accent to a room. Use it on a built-in banquette, an entryway bench, or a kids room window seat. Pair it with warm wood and olive textiles. Your cushion is made to your measurements, filled with the foam you pick.\u003c\/p\u003e\n\u003cp\u003eA marled, yarn-dyed tartan check with a cozy, chunky weave. It suits rustic or lodge-style interiors. Warwick rates Highlands for heavy commercial upholstery use, tested to 90,000 Martindale rubs. It comes with Warwick's Halo easy-clean finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterial Composition\u003c\/strong\u003e - 100% Polyester\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing your foam (3-year foam warranty)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Density:\u003c\/strong\u003e a medium feel for everyday seats, chairs and mattresses. 1.8 lb\/ft³ density, 35 lb ILD, lasts about 7 years. For thin dining seats (1″–2″), Luxury foam holds up better.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLuxury:\u003c\/strong\u003e firm, and firmer as it gets thicker (7″–8″ feels very firm unless you weigh over 200 lb). 1.8 lb\/ft³, 50 lb ILD, lasts about 5–8 years. A good pick for dining seats from 1″ to 3″.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Fast:\u003c\/strong\u003e open-cell outdoor foam that lets water drain straight through, for patio, pool and boat cushions. Firm, 1.8 lb\/ft³, 60 lb ILD, lasts about 5–8 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Soft:\u003c\/strong\u003e for sofa back cushions and mattress toppers only, not seats. 1.2 lb\/ft³, 12 lb ILD, lasts about 5 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDacron wrap (optional):\u003c\/strong\u003e a 1″ layer of polyester fiberfill around the foam that rounds the edges and fills the cover. We attach it with fine staples that won't tear the foam or the cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber fill:\u003c\/strong\u003e loose 100% polyester filling for back cushions you want to sink into. Not for seats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEntering your size\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnter every measurement in inches.\u003c\/li\u003e\n\u003cli\u003eSizes between quarter inches are rounded up to the next ¼″.\u003c\/li\u003e\n\u003cli\u003eGive us the finished cushion size. If you add a Dacron wrap, don't make the numbers smaller; we allow for the wrap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePiping and ties\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePiping is a fabric-covered cord sewn into the edge seams. It gives the cushion a neat, defined edge and helps it keep its shape. Ties hold the cushion to the chair frame so it doesn't slide. If you need ties somewhere the options don't cover, \u003ca href=\"mailto:care@fabricakraft.com\"\u003eemail us\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThick cushions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe cut foam up to 6″ thick from one solid piece. From over 6″ to 8″, we glue two layers of the same foam together at no extra charge. For anything over 8″, or to mix two foam types in one cushion, \u003ca href=\"\/en-ca\/pages\/contact\"\u003econtact us\u003c\/a\u003e for a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturing Tolerances\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor custom orders, we cut to within ±0.5″ of your measurements.\u003c\/p\u003e","brand":"Warwick","offers":[{"title":"Default Title","offer_id":67893006729451,"sku":"Highlands Terracotta","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/9018\/5451\/files\/FHI22TERR.jpg?v=1791352652"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/9018\/5451\/collections\/FHI22TERR.jpg?v=1792350196","url":"https:\/\/www.fabricakraft.com\/en-ca\/collections\/warwick-highlands-collection.oembed","provider":"Fabrica Kraft ","version":"1.0","type":"link"}