{"title":"Sunbrella Vision Collection","description":"\u003cp\u003eThe Sunbrella Vision collection at Fabrica Kraft has 33 fabrics, including Lumy Parchment, Lumy Rice, Lumy Silver and Lumy Oyster. Sunbrella is solution-dyed acrylic, so the color runs through the fiber and holds up to sun, rain and mildew. Pick any color and build a cushion, pillow or curtain to your exact size.\u003c\/p\u003e\u003cp\u003eVision brings small textured solids, like the Lumy micro-square weave, together with textured stripes. From across the patio they read as calm solids; up close the texture shows. Use Lumy Aluminium or Flavour Jasmine for dining benches or a deep-seat sofa. Each cushion is cut within ±0.5″ of your size, with ties in matching fabric, and most ship in 2–3 weeks.\u003c\/p\u003e\u003cp\u003eBuild your cushions in the \u003ca href=\"\/en-ca\/products\/custom-deep-seat-cushions-sunbrella\"\u003edeep seat cushion builder\u003c\/a\u003e or the \u003ca href=\"\/en-ca\/products\/custom-bench-cushion-sunbrella\"\u003ebench cushion builder\u003c\/a\u003e, see all \u003ca href=\"\/en-ca\/collections\/sunbrella-cushions\"\u003eSunbrella cushions\u003c\/a\u003e, or \u003ca href=\"\/en-ca\/pages\/fabric-swatches\"\u003eorder swatches\u003c\/a\u003e to compare Sunbrella Vision colors at home.\u003c\/p\u003e\u003ch2\u003eQuestions about Sunbrella Vision\u003c\/h2\u003e\u003ch3\u003eCan Sunbrella Vision cushions stay outside in the rain?\u003c\/h3\u003e\u003cp\u003eYes. Sunbrella Vision is water- and stain-repellent and made for sun, rain and mildew, though it is not waterproof. For cushions left out in heavy rain, add Dry Fast foam, or see our Sunbrella waterproof range.\u003c\/p\u003e\u003ch3\u003eHow do I clean Sunbrella Vision cushions?\u003c\/h3\u003e\u003cp\u003eBrush off loose dirt, then sponge Sunbrella Vision covers with mild soap and lukewarm water and rinse well. The covers zip off and are machine washable; let them air-dry before refitting.\u003c\/p\u003e\u003ch3\u003eCan I order a Sunbrella Vision swatch?\u003c\/h3\u003e\u003cp\u003eYes. Swatches are paid, and we send a one-time code that credits the swatch cost back on your cushion order. It is the best way to check Lumy Aluminium or Flavour Jasmine in daylight.\u003c\/p\u003e","products":[{"product_id":"sunbrella-lumy-parchment-cushion","title":"Sunbrella Lumy Parchment Custom Outdoor Cushion","description":"\u003cp\u003e\u003cstrong\u003eSunbrella Lumy Parchment\u003c\/strong\u003e is part of Sunbrella's new Vision collection: a small textured solid with a fine micro-square weave that reads as a solid from across the patio. Parchment is a warm sand beige that sits easily with wood, wicker and terracotta. It is a safe, calm choice for dining benches and chaise cushions. Made from 97% Sunbrella acrylic, 3% Sunbrella polyester (330 g\/m²), it has a non-PFAS water-repellent, stain-resistant finish and a 5-year Sunbrella warranty. We make every cushion to order, any shape, with Dry Fast foam available for wet areas and a zippered cover.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing your foam (3-year foam warranty)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Density:\u003c\/strong\u003e a medium feel for everyday seats, chairs and mattresses. 1.8 lb\/ft³ density, 35 lb ILD, lasts about 7 years. For thin dining seats (1″–2″), Luxury foam holds up better.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLuxury:\u003c\/strong\u003e firm, and firmer as it gets thicker (7″–8″ feels very firm unless you weigh over 200 lb). 1.8 lb\/ft³, 50 lb ILD, lasts about 5–8 years. A good pick for dining seats from 1″ to 3″.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Fast:\u003c\/strong\u003e open-cell outdoor foam that lets water drain straight through, for patio, pool and boat cushions. Firm, 1.8 lb\/ft³, 60 lb ILD, lasts about 5–8 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Soft:\u003c\/strong\u003e for sofa back cushions and mattress toppers only, not seats. 1.2 lb\/ft³, 12 lb ILD, lasts about 5 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDacron wrap (optional):\u003c\/strong\u003e a 1″ layer of polyester fiberfill around the foam that rounds the edges and fills the cover. We attach it with fine staples that won't tear the foam or the cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber fill:\u003c\/strong\u003e loose 100% polyester filling for back cushions you want to sink into. Not for seats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEntering your size\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnter every measurement in inches.\u003c\/li\u003e\n\u003cli\u003eSizes between quarter inches are rounded up to the next ¼″.\u003c\/li\u003e\n\u003cli\u003eGive us the finished cushion size. If you add a Dacron wrap, don't make the numbers smaller; we allow for the wrap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePiping and ties\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePiping is a fabric-covered cord sewn into the edge seams. It gives the cushion a neat, defined edge and helps it keep its shape. Ties hold the cushion to the chair frame so it doesn't slide. If you need ties somewhere the options don't cover, \u003ca href=\"mailto:care@fabricakraft.com\"\u003eemail us\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThick cushions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe cut foam up to 6″ thick from one solid piece. From over 6″ to 8″, we glue two layers of the same foam together at no extra charge. For anything over 8″, or to mix two foam types in one cushion, \u003ca href=\"\/en-ca\/pages\/contact\"\u003econtact us\u003c\/a\u003e for a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturing Tolerances\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor custom orders, we cut to within ±0.5″ of your measurements.\u003c\/p\u003e\n","brand":"Sunbrella","offers":[{"title":"Default Title","offer_id":67890785616107,"sku":"LUM-B148-140","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/9018\/5451\/files\/lum_b148_lumy_parchment_680x480_rvb_120690.webp?v=1791315228"},{"product_id":"sunbrella-lumy-rice-cushion","title":"Sunbrella Lumy Rice Custom Outdoor Cushion","description":"\u003cp\u003e\u003cstrong\u003eSunbrella Lumy Rice\u003c\/strong\u003e is part of Sunbrella's new Vision collection: a small textured solid with a fine micro-square weave that reads as a solid from across the patio. Rice is a soft creamy white with a hint of warmth. It keeps a bench or daybed light and airy and pairs with natural teak, rattan and pale stone. Made from 97% Sunbrella acrylic, 3% Sunbrella polyester (330 g\/m²), it has a non-PFAS water-repellent, stain-resistant finish and a 5-year Sunbrella warranty. We make every cushion to order, any shape, with Dry Fast foam available for wet areas and a zippered cover.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing your foam (3-year foam warranty)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Density:\u003c\/strong\u003e a medium feel for everyday seats, chairs and mattresses. 1.8 lb\/ft³ density, 35 lb ILD, lasts about 7 years. For thin dining seats (1″–2″), Luxury foam holds up better.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLuxury:\u003c\/strong\u003e firm, and firmer as it gets thicker (7″–8″ feels very firm unless you weigh over 200 lb). 1.8 lb\/ft³, 50 lb ILD, lasts about 5–8 years. A good pick for dining seats from 1″ to 3″.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Fast:\u003c\/strong\u003e open-cell outdoor foam that lets water drain straight through, for patio, pool and boat cushions. Firm, 1.8 lb\/ft³, 60 lb ILD, lasts about 5–8 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Soft:\u003c\/strong\u003e for sofa back cushions and mattress toppers only, not seats. 1.2 lb\/ft³, 12 lb ILD, lasts about 5 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDacron wrap (optional):\u003c\/strong\u003e a 1″ layer of polyester fiberfill around the foam that rounds the edges and fills the cover. We attach it with fine staples that won't tear the foam or the cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber fill:\u003c\/strong\u003e loose 100% polyester filling for back cushions you want to sink into. Not for seats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEntering your size\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnter every measurement in inches.\u003c\/li\u003e\n\u003cli\u003eSizes between quarter inches are rounded up to the next ¼″.\u003c\/li\u003e\n\u003cli\u003eGive us the finished cushion size. If you add a Dacron wrap, don't make the numbers smaller; we allow for the wrap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePiping and ties\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePiping is a fabric-covered cord sewn into the edge seams. It gives the cushion a neat, defined edge and helps it keep its shape. Ties hold the cushion to the chair frame so it doesn't slide. If you need ties somewhere the options don't cover, \u003ca href=\"mailto:care@fabricakraft.com\"\u003eemail us\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThick cushions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe cut foam up to 6″ thick from one solid piece. From over 6″ to 8″, we glue two layers of the same foam together at no extra charge. For anything over 8″, or to mix two foam types in one cushion, \u003ca href=\"\/en-ca\/pages\/contact\"\u003econtact us\u003c\/a\u003e for a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturing Tolerances\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor custom orders, we cut to within ±0.5″ of your measurements.\u003c\/p\u003e\n","brand":"Sunbrella","offers":[{"title":"Default Title","offer_id":67890800296171,"sku":"LUM-B146-140","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/9018\/5451\/files\/lum_b146_lumy_rice_680x480_rvb_98617.webp?v=1791315438"},{"product_id":"sunbrella-lumy-silver-cushion","title":"Sunbrella Lumy Silver Custom Outdoor Cushion","description":"\u003cp\u003e\u003cstrong\u003eSunbrella Lumy Silver\u003c\/strong\u003e is part of Sunbrella's new Vision collection: a small textured solid with a fine micro-square weave that reads as a solid from across the patio. Silver is a light, cool gray that looks crisp against white trim and black or gray aluminum frames. It suits modern patios and covered porches. Made from 97% Sunbrella acrylic, 3% Sunbrella polyester (330 g\/m²), it has a non-PFAS water-repellent, stain-resistant finish and a 5-year Sunbrella warranty. We make every cushion to order, any shape, with Dry Fast foam available for wet areas and a zippered cover.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing your foam (3-year foam warranty)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Density:\u003c\/strong\u003e a medium feel for everyday seats, chairs and mattresses. 1.8 lb\/ft³ density, 35 lb ILD, lasts about 7 years. For thin dining seats (1″–2″), Luxury foam holds up better.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLuxury:\u003c\/strong\u003e firm, and firmer as it gets thicker (7″–8″ feels very firm unless you weigh over 200 lb). 1.8 lb\/ft³, 50 lb ILD, lasts about 5–8 years. A good pick for dining seats from 1″ to 3″.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Fast:\u003c\/strong\u003e open-cell outdoor foam that lets water drain straight through, for patio, pool and boat cushions. Firm, 1.8 lb\/ft³, 60 lb ILD, lasts about 5–8 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Soft:\u003c\/strong\u003e for sofa back cushions and mattress toppers only, not seats. 1.2 lb\/ft³, 12 lb ILD, lasts about 5 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDacron wrap (optional):\u003c\/strong\u003e a 1″ layer of polyester fiberfill around the foam that rounds the edges and fills the cover. We attach it with fine staples that won't tear the foam or the cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber fill:\u003c\/strong\u003e loose 100% polyester filling for back cushions you want to sink into. Not for seats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEntering your size\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnter every measurement in inches.\u003c\/li\u003e\n\u003cli\u003eSizes between quarter inches are rounded up to the next ¼″.\u003c\/li\u003e\n\u003cli\u003eGive us the finished cushion size. If you add a Dacron wrap, don't make the numbers smaller; we allow for the wrap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePiping and ties\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePiping is a fabric-covered cord sewn into the edge seams. It gives the cushion a neat, defined edge and helps it keep its shape. Ties hold the cushion to the chair frame so it doesn't slide. If you need ties somewhere the options don't cover, \u003ca href=\"mailto:care@fabricakraft.com\"\u003eemail us\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThick cushions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe cut foam up to 6″ thick from one solid piece. From over 6″ to 8″, we glue two layers of the same foam together at no extra charge. For anything over 8″, or to mix two foam types in one cushion, \u003ca href=\"\/en-ca\/pages\/contact\"\u003econtact us\u003c\/a\u003e for a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturing Tolerances\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor custom orders, we cut to within ±0.5″ of your measurements.\u003c\/p\u003e\n","brand":"Sunbrella","offers":[{"title":"Default Title","offer_id":67890800460011,"sku":"LUM-B147-140","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/9018\/5451\/files\/lum_b147_lumy_silver_680x480_rvb_101457.webp?v=1791315439"},{"product_id":"sunbrella-lumy-oyster-cushion","title":"Sunbrella Lumy Oyster Custom Outdoor Cushion","description":"\u003cp\u003e\u003cstrong\u003eSunbrella Lumy Oyster\u003c\/strong\u003e is part of Sunbrella's new Vision collection: a small textured solid with a fine micro-square weave that reads as a solid from across the patio. Oyster is a gray-taupe that bridges warm and cool tones. It hides everyday dust well and works with weathered teak, stone and greenery. Made from 97% Sunbrella acrylic, 3% Sunbrella polyester (330 g\/m²), it has a non-PFAS water-repellent, stain-resistant finish and a 5-year Sunbrella warranty. We make every cushion to order, any shape, with Dry Fast foam available for wet areas and a zippered cover.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing your foam (3-year foam warranty)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Density:\u003c\/strong\u003e a medium feel for everyday seats, chairs and mattresses. 1.8 lb\/ft³ density, 35 lb ILD, lasts about 7 years. For thin dining seats (1″–2″), Luxury foam holds up better.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLuxury:\u003c\/strong\u003e firm, and firmer as it gets thicker (7″–8″ feels very firm unless you weigh over 200 lb). 1.8 lb\/ft³, 50 lb ILD, lasts about 5–8 years. A good pick for dining seats from 1″ to 3″.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Fast:\u003c\/strong\u003e open-cell outdoor foam that lets water drain straight through, for patio, pool and boat cushions. Firm, 1.8 lb\/ft³, 60 lb ILD, lasts about 5–8 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Soft:\u003c\/strong\u003e for sofa back cushions and mattress toppers only, not seats. 1.2 lb\/ft³, 12 lb ILD, lasts about 5 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDacron wrap (optional):\u003c\/strong\u003e a 1″ layer of polyester fiberfill around the foam that rounds the edges and fills the cover. We attach it with fine staples that won't tear the foam or the cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber fill:\u003c\/strong\u003e loose 100% polyester filling for back cushions you want to sink into. Not for seats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEntering your size\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnter every measurement in inches.\u003c\/li\u003e\n\u003cli\u003eSizes between quarter inches are rounded up to the next ¼″.\u003c\/li\u003e\n\u003cli\u003eGive us the finished cushion size. If you add a Dacron wrap, don't make the numbers smaller; we allow for the wrap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePiping and ties\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePiping is a fabric-covered cord sewn into the edge seams. It gives the cushion a neat, defined edge and helps it keep its shape. Ties hold the cushion to the chair frame so it doesn't slide. If you need ties somewhere the options don't cover, \u003ca href=\"mailto:care@fabricakraft.com\"\u003eemail us\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThick cushions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe cut foam up to 6″ thick from one solid piece. From over 6″ to 8″, we glue two layers of the same foam together at no extra charge. For anything over 8″, or to mix two foam types in one cushion, \u003ca href=\"\/en-ca\/pages\/contact\"\u003econtact us\u003c\/a\u003e for a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturing Tolerances\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor custom orders, we cut to within ±0.5″ of your measurements.\u003c\/p\u003e\n","brand":"Sunbrella","offers":[{"title":"Default Title","offer_id":67890800525547,"sku":"LUM-B149-140","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/9018\/5451\/files\/lum_b149_lumy_oyster_680x480_rvb_114348.webp?v=1791315440"},{"product_id":"sunbrella-lumy-craft-cushion","title":"Sunbrella Lumy Craft Custom Outdoor Cushion","description":"\u003cp\u003e\u003cstrong\u003eSunbrella Lumy Craft\u003c\/strong\u003e is part of Sunbrella's new Vision collection: a small textured solid with a fine micro-square weave that reads as a solid from across the patio. Craft is a warm caramel brown with an earthy, handmade feel. It pairs well with cream pillows, dark wood and terracotta pots. Made from 97% Sunbrella acrylic, 3% Sunbrella polyester (330 g\/m²), it has a non-PFAS water-repellent, stain-resistant finish and a 5-year Sunbrella warranty. We make every cushion to order, any shape, with Dry Fast foam available for wet areas and a zippered cover.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing your foam (3-year foam warranty)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Density:\u003c\/strong\u003e a medium feel for everyday seats, chairs and mattresses. 1.8 lb\/ft³ density, 35 lb ILD, lasts about 7 years. For thin dining seats (1″–2″), Luxury foam holds up better.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLuxury:\u003c\/strong\u003e firm, and firmer as it gets thicker (7″–8″ feels very firm unless you weigh over 200 lb). 1.8 lb\/ft³, 50 lb ILD, lasts about 5–8 years. A good pick for dining seats from 1″ to 3″.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Fast:\u003c\/strong\u003e open-cell outdoor foam that lets water drain straight through, for patio, pool and boat cushions. Firm, 1.8 lb\/ft³, 60 lb ILD, lasts about 5–8 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Soft:\u003c\/strong\u003e for sofa back cushions and mattress toppers only, not seats. 1.2 lb\/ft³, 12 lb ILD, lasts about 5 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDacron wrap (optional):\u003c\/strong\u003e a 1″ layer of polyester fiberfill around the foam that rounds the edges and fills the cover. We attach it with fine staples that won't tear the foam or the cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber fill:\u003c\/strong\u003e loose 100% polyester filling for back cushions you want to sink into. Not for seats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEntering your size\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnter every measurement in inches.\u003c\/li\u003e\n\u003cli\u003eSizes between quarter inches are rounded up to the next ¼″.\u003c\/li\u003e\n\u003cli\u003eGive us the finished cushion size. If you add a Dacron wrap, don't make the numbers smaller; we allow for the wrap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePiping and ties\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePiping is a fabric-covered cord sewn into the edge seams. It gives the cushion a neat, defined edge and helps it keep its shape. Ties hold the cushion to the chair frame so it doesn't slide. If you need ties somewhere the options don't cover, \u003ca href=\"mailto:care@fabricakraft.com\"\u003eemail us\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThick cushions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe cut foam up to 6″ thick from one solid piece. From over 6″ to 8″, we glue two layers of the same foam together at no extra charge. For anything over 8″, or to mix two foam types in one cushion, \u003ca href=\"\/en-ca\/pages\/contact\"\u003econtact us\u003c\/a\u003e for a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturing Tolerances\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor custom orders, we cut to within ±0.5″ of your measurements.\u003c\/p\u003e\n","brand":"Sunbrella","offers":[{"title":"Default Title","offer_id":67890800722155,"sku":"LUM-B151-140","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/9018\/5451\/files\/lum_b151_lumy_craft_680x480_rvb_131062.webp?v=1791315442"},{"product_id":"sunbrella-lumy-rosewood-cushion","title":"Sunbrella Lumy Rosewood Custom Outdoor Cushion","description":"\u003cp\u003e\u003cstrong\u003eSunbrella Lumy Rosewood\u003c\/strong\u003e is part of Sunbrella's new Vision collection: a small textured solid with a fine micro-square weave that reads as a solid from across the patio. Rosewood is a dusty rose with a red undertone. It brings soft color to a window seat or garden bench without feeling loud. Made from 97% Sunbrella acrylic, 3% Sunbrella polyester (330 g\/m²), it has a non-PFAS water-repellent, stain-resistant finish and a 5-year Sunbrella warranty. We make every cushion to order, any shape, with Dry Fast foam available for wet areas and a zippered cover.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing your foam (3-year foam warranty)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Density:\u003c\/strong\u003e a medium feel for everyday seats, chairs and mattresses. 1.8 lb\/ft³ density, 35 lb ILD, lasts about 7 years. For thin dining seats (1″–2″), Luxury foam holds up better.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLuxury:\u003c\/strong\u003e firm, and firmer as it gets thicker (7″–8″ feels very firm unless you weigh over 200 lb). 1.8 lb\/ft³, 50 lb ILD, lasts about 5–8 years. A good pick for dining seats from 1″ to 3″.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Fast:\u003c\/strong\u003e open-cell outdoor foam that lets water drain straight through, for patio, pool and boat cushions. Firm, 1.8 lb\/ft³, 60 lb ILD, lasts about 5–8 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Soft:\u003c\/strong\u003e for sofa back cushions and mattress toppers only, not seats. 1.2 lb\/ft³, 12 lb ILD, lasts about 5 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDacron wrap (optional):\u003c\/strong\u003e a 1″ layer of polyester fiberfill around the foam that rounds the edges and fills the cover. We attach it with fine staples that won't tear the foam or the cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber fill:\u003c\/strong\u003e loose 100% polyester filling for back cushions you want to sink into. Not for seats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEntering your size\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnter every measurement in inches.\u003c\/li\u003e\n\u003cli\u003eSizes between quarter inches are rounded up to the next ¼″.\u003c\/li\u003e\n\u003cli\u003eGive us the finished cushion size. If you add a Dacron wrap, don't make the numbers smaller; we allow for the wrap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePiping and ties\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePiping is a fabric-covered cord sewn into the edge seams. It gives the cushion a neat, defined edge and helps it keep its shape. Ties hold the cushion to the chair frame so it doesn't slide. If you need ties somewhere the options don't cover, \u003ca href=\"mailto:care@fabricakraft.com\"\u003eemail us\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThick cushions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe cut foam up to 6″ thick from one solid piece. From over 6″ to 8″, we glue two layers of the same foam together at no extra charge. For anything over 8″, or to mix two foam types in one cushion, \u003ca href=\"\/en-ca\/pages\/contact\"\u003econtact us\u003c\/a\u003e for a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturing Tolerances\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor custom orders, we cut to within ±0.5″ of your measurements.\u003c\/p\u003e\n","brand":"Sunbrella","offers":[{"title":"Default Title","offer_id":67890800754923,"sku":"LUM-B150-140","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/9018\/5451\/files\/lum_b150_lumy_rosewood_680x480_rvb_141796.webp?v=1791315443"},{"product_id":"sunbrella-lumy-aluminium-cushion","title":"Sunbrella Lumy Aluminium Custom Outdoor Cushion","description":"\u003cp\u003e\u003cstrong\u003eSunbrella Lumy Aluminium\u003c\/strong\u003e is part of Sunbrella's new Vision collection: a small textured solid with a fine micro-square weave that reads as a solid from across the patio. Aluminium is a mid charcoal gray with a subtle textured look. It is practical for busy outdoor seating and matches metal and concrete. Made from 97% Sunbrella acrylic, 3% Sunbrella polyester (330 g\/m²), it has a non-PFAS water-repellent, stain-resistant finish and a 5-year Sunbrella warranty. We make every cushion to order, any shape, with Dry Fast foam available for wet areas and a zippered cover.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing your foam (3-year foam warranty)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Density:\u003c\/strong\u003e a medium feel for everyday seats, chairs and mattresses. 1.8 lb\/ft³ density, 35 lb ILD, lasts about 7 years. For thin dining seats (1″–2″), Luxury foam holds up better.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLuxury:\u003c\/strong\u003e firm, and firmer as it gets thicker (7″–8″ feels very firm unless you weigh over 200 lb). 1.8 lb\/ft³, 50 lb ILD, lasts about 5–8 years. A good pick for dining seats from 1″ to 3″.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Fast:\u003c\/strong\u003e open-cell outdoor foam that lets water drain straight through, for patio, pool and boat cushions. Firm, 1.8 lb\/ft³, 60 lb ILD, lasts about 5–8 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Soft:\u003c\/strong\u003e for sofa back cushions and mattress toppers only, not seats. 1.2 lb\/ft³, 12 lb ILD, lasts about 5 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDacron wrap (optional):\u003c\/strong\u003e a 1″ layer of polyester fiberfill around the foam that rounds the edges and fills the cover. We attach it with fine staples that won't tear the foam or the cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber fill:\u003c\/strong\u003e loose 100% polyester filling for back cushions you want to sink into. Not for seats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEntering your size\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnter every measurement in inches.\u003c\/li\u003e\n\u003cli\u003eSizes between quarter inches are rounded up to the next ¼″.\u003c\/li\u003e\n\u003cli\u003eGive us the finished cushion size. If you add a Dacron wrap, don't make the numbers smaller; we allow for the wrap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePiping and ties\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePiping is a fabric-covered cord sewn into the edge seams. It gives the cushion a neat, defined edge and helps it keep its shape. Ties hold the cushion to the chair frame so it doesn't slide. If you need ties somewhere the options don't cover, \u003ca href=\"mailto:care@fabricakraft.com\"\u003eemail us\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThick cushions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe cut foam up to 6″ thick from one solid piece. From over 6″ to 8″, we glue two layers of the same foam together at no extra charge. For anything over 8″, or to mix two foam types in one cushion, \u003ca href=\"\/en-ca\/pages\/contact\"\u003econtact us\u003c\/a\u003e for a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturing Tolerances\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor custom orders, we cut to within ±0.5″ of your measurements.\u003c\/p\u003e\n","brand":"Sunbrella","offers":[{"title":"Default Title","offer_id":67890800984299,"sku":"LUM-B152-140","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/9018\/5451\/files\/lum_b152_lumy_aluminium_680x480_rvb_128197.webp?v=1791315445"},{"product_id":"sunbrella-lumy-indigo-cushion","title":"Sunbrella Lumy Indigo Custom Outdoor Cushion","description":"\u003cp\u003e\u003cstrong\u003eSunbrella Lumy Indigo\u003c\/strong\u003e is part of Sunbrella's new Vision collection: a small textured solid with a fine micro-square weave that reads as a solid from across the patio. Indigo is a deep navy blue with a fine woven texture. It gives boats, porches and poolside loungers a classic coastal look. Made from 97% Sunbrella acrylic, 3% Sunbrella polyester (330 g\/m²), it has a non-PFAS water-repellent, stain-resistant finish and a 5-year Sunbrella warranty. We make every cushion to order, any shape, with Dry Fast foam available for wet areas and a zippered cover.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing your foam (3-year foam warranty)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Density:\u003c\/strong\u003e a medium feel for everyday seats, chairs and mattresses. 1.8 lb\/ft³ density, 35 lb ILD, lasts about 7 years. For thin dining seats (1″–2″), Luxury foam holds up better.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLuxury:\u003c\/strong\u003e firm, and firmer as it gets thicker (7″–8″ feels very firm unless you weigh over 200 lb). 1.8 lb\/ft³, 50 lb ILD, lasts about 5–8 years. A good pick for dining seats from 1″ to 3″.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Fast:\u003c\/strong\u003e open-cell outdoor foam that lets water drain straight through, for patio, pool and boat cushions. Firm, 1.8 lb\/ft³, 60 lb ILD, lasts about 5–8 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Soft:\u003c\/strong\u003e for sofa back cushions and mattress toppers only, not seats. 1.2 lb\/ft³, 12 lb ILD, lasts about 5 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDacron wrap (optional):\u003c\/strong\u003e a 1″ layer of polyester fiberfill around the foam that rounds the edges and fills the cover. We attach it with fine staples that won't tear the foam or the cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber fill:\u003c\/strong\u003e loose 100% polyester filling for back cushions you want to sink into. Not for seats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEntering your size\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnter every measurement in inches.\u003c\/li\u003e\n\u003cli\u003eSizes between quarter inches are rounded up to the next ¼″.\u003c\/li\u003e\n\u003cli\u003eGive us the finished cushion size. If you add a Dacron wrap, don't make the numbers smaller; we allow for the wrap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePiping and ties\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePiping is a fabric-covered cord sewn into the edge seams. It gives the cushion a neat, defined edge and helps it keep its shape. Ties hold the cushion to the chair frame so it doesn't slide. If you need ties somewhere the options don't cover, \u003ca href=\"mailto:care@fabricakraft.com\"\u003eemail us\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThick cushions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe cut foam up to 6″ thick from one solid piece. From over 6″ to 8″, we glue two layers of the same foam together at no extra charge. For anything over 8″, or to mix two foam types in one cushion, \u003ca href=\"\/en-ca\/pages\/contact\"\u003econtact us\u003c\/a\u003e for a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturing Tolerances\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor custom orders, we cut to within ±0.5″ of your measurements.\u003c\/p\u003e\n","brand":"Sunbrella","offers":[{"title":"Default Title","offer_id":67890801082603,"sku":"LUM-B154-140","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/9018\/5451\/files\/lum_b154_lumy_indigo_680x480_rvb_123909.webp?v=1791315446"},{"product_id":"sunbrella-lumy-cypress-cushion","title":"Sunbrella Lumy Cypress Custom Outdoor Cushion","description":"\u003cp\u003e\u003cstrong\u003eSunbrella Lumy Cypress\u003c\/strong\u003e is part of Sunbrella's new Vision collection: a small textured solid with a fine micro-square weave that reads as a solid from across the patio. Cypress is a deep forest green that blends into gardens and looks rich against white or natural wood frames. Made from 97% Sunbrella acrylic, 3% Sunbrella polyester (330 g\/m²), it has a non-PFAS water-repellent, stain-resistant finish and a 5-year Sunbrella warranty. We make every cushion to order, any shape, with Dry Fast foam available for wet areas and a zippered cover.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing your foam (3-year foam warranty)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Density:\u003c\/strong\u003e a medium feel for everyday seats, chairs and mattresses. 1.8 lb\/ft³ density, 35 lb ILD, lasts about 7 years. For thin dining seats (1″–2″), Luxury foam holds up better.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLuxury:\u003c\/strong\u003e firm, and firmer as it gets thicker (7″–8″ feels very firm unless you weigh over 200 lb). 1.8 lb\/ft³, 50 lb ILD, lasts about 5–8 years. A good pick for dining seats from 1″ to 3″.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Fast:\u003c\/strong\u003e open-cell outdoor foam that lets water drain straight through, for patio, pool and boat cushions. Firm, 1.8 lb\/ft³, 60 lb ILD, lasts about 5–8 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Soft:\u003c\/strong\u003e for sofa back cushions and mattress toppers only, not seats. 1.2 lb\/ft³, 12 lb ILD, lasts about 5 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDacron wrap (optional):\u003c\/strong\u003e a 1″ layer of polyester fiberfill around the foam that rounds the edges and fills the cover. We attach it with fine staples that won't tear the foam or the cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber fill:\u003c\/strong\u003e loose 100% polyester filling for back cushions you want to sink into. Not for seats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEntering your size\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnter every measurement in inches.\u003c\/li\u003e\n\u003cli\u003eSizes between quarter inches are rounded up to the next ¼″.\u003c\/li\u003e\n\u003cli\u003eGive us the finished cushion size. If you add a Dacron wrap, don't make the numbers smaller; we allow for the wrap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePiping and ties\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePiping is a fabric-covered cord sewn into the edge seams. It gives the cushion a neat, defined edge and helps it keep its shape. Ties hold the cushion to the chair frame so it doesn't slide. If you need ties somewhere the options don't cover, \u003ca href=\"mailto:care@fabricakraft.com\"\u003eemail us\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThick cushions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe cut foam up to 6″ thick from one solid piece. From over 6″ to 8″, we glue two layers of the same foam together at no extra charge. For anything over 8″, or to mix two foam types in one cushion, \u003ca href=\"\/en-ca\/pages\/contact\"\u003econtact us\u003c\/a\u003e for a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturing Tolerances\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor custom orders, we cut to within ±0.5″ of your measurements.\u003c\/p\u003e\n","brand":"Sunbrella","offers":[{"title":"Default Title","offer_id":67890801377515,"sku":"LUM-B155-140","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/9018\/5451\/files\/lum_b155_lumy_cypress_680x480_rvb_165848.webp?v=1791315447"},{"product_id":"sunbrella-lumy-iron-cushion","title":"Sunbrella Lumy Iron Custom Outdoor Cushion","description":"\u003cp\u003e\u003cstrong\u003eSunbrella Lumy Iron\u003c\/strong\u003e is part of Sunbrella's new Vision collection: a small textured solid with a fine micro-square weave that reads as a solid from across the patio. Iron is a near-black charcoal with a soft texture. It is bold, modern and forgiving on high-traffic seating. Made from 97% Sunbrella acrylic, 3% Sunbrella polyester (330 g\/m²), it has a non-PFAS water-repellent, stain-resistant finish and a 5-year Sunbrella warranty. We make every cushion to order, any shape, with Dry Fast foam available for wet areas and a zippered cover.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing your foam (3-year foam warranty)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Density:\u003c\/strong\u003e a medium feel for everyday seats, chairs and mattresses. 1.8 lb\/ft³ density, 35 lb ILD, lasts about 7 years. For thin dining seats (1″–2″), Luxury foam holds up better.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLuxury:\u003c\/strong\u003e firm, and firmer as it gets thicker (7″–8″ feels very firm unless you weigh over 200 lb). 1.8 lb\/ft³, 50 lb ILD, lasts about 5–8 years. A good pick for dining seats from 1″ to 3″.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Fast:\u003c\/strong\u003e open-cell outdoor foam that lets water drain straight through, for patio, pool and boat cushions. Firm, 1.8 lb\/ft³, 60 lb ILD, lasts about 5–8 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Soft:\u003c\/strong\u003e for sofa back cushions and mattress toppers only, not seats. 1.2 lb\/ft³, 12 lb ILD, lasts about 5 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDacron wrap (optional):\u003c\/strong\u003e a 1″ layer of polyester fiberfill around the foam that rounds the edges and fills the cover. We attach it with fine staples that won't tear the foam or the cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber fill:\u003c\/strong\u003e loose 100% polyester filling for back cushions you want to sink into. Not for seats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEntering your size\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnter every measurement in inches.\u003c\/li\u003e\n\u003cli\u003eSizes between quarter inches are rounded up to the next ¼″.\u003c\/li\u003e\n\u003cli\u003eGive us the finished cushion size. If you add a Dacron wrap, don't make the numbers smaller; we allow for the wrap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePiping and ties\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePiping is a fabric-covered cord sewn into the edge seams. It gives the cushion a neat, defined edge and helps it keep its shape. Ties hold the cushion to the chair frame so it doesn't slide. If you need ties somewhere the options don't cover, \u003ca href=\"mailto:care@fabricakraft.com\"\u003eemail us\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThick cushions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe cut foam up to 6″ thick from one solid piece. From over 6″ to 8″, we glue two layers of the same foam together at no extra charge. For anything over 8″, or to mix two foam types in one cushion, \u003ca href=\"\/en-ca\/pages\/contact\"\u003econtact us\u003c\/a\u003e for a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturing Tolerances\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor custom orders, we cut to within ±0.5″ of your measurements.\u003c\/p\u003e\n","brand":"Sunbrella","offers":[{"title":"Default Title","offer_id":67890826772715,"sku":"LUM-B153-140","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/9018\/5451\/files\/lum_b153_lumy_iron_680x480_rvb_149260.webp?v=1791315615"},{"product_id":"sunbrella-costa-bejaia-cushion","title":"Sunbrella Costa Bejaia Custom Outdoor Cushion","description":"\u003cp\u003e\u003cstrong\u003eSunbrella Costa Bejaia\u003c\/strong\u003e is part of Sunbrella's new Vision collection: a classic stripe on a soft white base with a balanced 12 cm (about 4.7″) repeat. Bejaia pairs a warm sand stripe with white for a relaxed beach-house look. It works on deck chairs, daybeds and porch swings. Made from 100% Sunbrella acrylic (260 g\/m²), it has a non-PFAS water-repellent, stain-resistant finish and a 5-year Sunbrella warranty. We make every cushion to order, any shape, with Dry Fast foam available for wet areas and a zippered cover.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing your foam (3-year foam warranty)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Density:\u003c\/strong\u003e a medium feel for everyday seats, chairs and mattresses. 1.8 lb\/ft³ density, 35 lb ILD, lasts about 7 years. For thin dining seats (1″–2″), Luxury foam holds up better.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLuxury:\u003c\/strong\u003e firm, and firmer as it gets thicker (7″–8″ feels very firm unless you weigh over 200 lb). 1.8 lb\/ft³, 50 lb ILD, lasts about 5–8 years. A good pick for dining seats from 1″ to 3″.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Fast:\u003c\/strong\u003e open-cell outdoor foam that lets water drain straight through, for patio, pool and boat cushions. Firm, 1.8 lb\/ft³, 60 lb ILD, lasts about 5–8 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Soft:\u003c\/strong\u003e for sofa back cushions and mattress toppers only, not seats. 1.2 lb\/ft³, 12 lb ILD, lasts about 5 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDacron wrap (optional):\u003c\/strong\u003e a 1″ layer of polyester fiberfill around the foam that rounds the edges and fills the cover. We attach it with fine staples that won't tear the foam or the cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber fill:\u003c\/strong\u003e loose 100% polyester filling for back cushions you want to sink into. Not for seats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEntering your size\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnter every measurement in inches.\u003c\/li\u003e\n\u003cli\u003eSizes between quarter inches are rounded up to the next ¼″.\u003c\/li\u003e\n\u003cli\u003eGive us the finished cushion size. If you add a Dacron wrap, don't make the numbers smaller; we allow for the wrap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePiping and ties\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePiping is a fabric-covered cord sewn into the edge seams. It gives the cushion a neat, defined edge and helps it keep its shape. Ties hold the cushion to the chair frame so it doesn't slide. If you need ties somewhere the options don't cover, \u003ca href=\"mailto:care@fabricakraft.com\"\u003eemail us\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThick cushions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe cut foam up to 6″ thick from one solid piece. From over 6″ to 8″, we glue two layers of the same foam together at no extra charge. For anything over 8″, or to mix two foam types in one cushion, \u003ca href=\"\/en-ca\/pages\/contact\"\u003econtact us\u003c\/a\u003e for a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturing Tolerances\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor custom orders, we cut to within ±0.5″ of your measurements.\u003c\/p\u003e\n","brand":"Sunbrella","offers":[{"title":"Default Title","offer_id":67890827002091,"sku":"SJA-4008-137","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/9018\/5451\/files\/sja_4008_costa_bejaia_680x480_laize_rvb_48047.webp?v=1791315616"},{"product_id":"sunbrella-costa-menton-cushion","title":"Sunbrella Costa Menton Custom Outdoor Cushion","description":"\u003cp\u003e\u003cstrong\u003eSunbrella Costa Menton\u003c\/strong\u003e is part of Sunbrella's new Vision collection: a classic stripe on a soft white base with a balanced 12 cm (about 4.7″) repeat. Menton is a sunny golden yellow and white stripe with a Riviera feel. It brightens white or painted furniture. Made from 100% Sunbrella acrylic (260 g\/m²), it has a non-PFAS water-repellent, stain-resistant finish and a 5-year Sunbrella warranty. We make every cushion to order, any shape, with Dry Fast foam available for wet areas and a zippered cover.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing your foam (3-year foam warranty)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Density:\u003c\/strong\u003e a medium feel for everyday seats, chairs and mattresses. 1.8 lb\/ft³ density, 35 lb ILD, lasts about 7 years. For thin dining seats (1″–2″), Luxury foam holds up better.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLuxury:\u003c\/strong\u003e firm, and firmer as it gets thicker (7″–8″ feels very firm unless you weigh over 200 lb). 1.8 lb\/ft³, 50 lb ILD, lasts about 5–8 years. A good pick for dining seats from 1″ to 3″.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Fast:\u003c\/strong\u003e open-cell outdoor foam that lets water drain straight through, for patio, pool and boat cushions. Firm, 1.8 lb\/ft³, 60 lb ILD, lasts about 5–8 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Soft:\u003c\/strong\u003e for sofa back cushions and mattress toppers only, not seats. 1.2 lb\/ft³, 12 lb ILD, lasts about 5 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDacron wrap (optional):\u003c\/strong\u003e a 1″ layer of polyester fiberfill around the foam that rounds the edges and fills the cover. We attach it with fine staples that won't tear the foam or the cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber fill:\u003c\/strong\u003e loose 100% polyester filling for back cushions you want to sink into. Not for seats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEntering your size\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnter every measurement in inches.\u003c\/li\u003e\n\u003cli\u003eSizes between quarter inches are rounded up to the next ¼″.\u003c\/li\u003e\n\u003cli\u003eGive us the finished cushion size. If you add a Dacron wrap, don't make the numbers smaller; we allow for the wrap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePiping and ties\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePiping is a fabric-covered cord sewn into the edge seams. It gives the cushion a neat, defined edge and helps it keep its shape. Ties hold the cushion to the chair frame so it doesn't slide. If you need ties somewhere the options don't cover, \u003ca href=\"mailto:care@fabricakraft.com\"\u003eemail us\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThick cushions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe cut foam up to 6″ thick from one solid piece. From over 6″ to 8″, we glue two layers of the same foam together at no extra charge. For anything over 8″, or to mix two foam types in one cushion, \u003ca href=\"\/en-ca\/pages\/contact\"\u003econtact us\u003c\/a\u003e for a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturing Tolerances\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor custom orders, we cut to within ±0.5″ of your measurements.\u003c\/p\u003e\n","brand":"Sunbrella","offers":[{"title":"Default Title","offer_id":67890827264235,"sku":"SJA-4009-137","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/9018\/5451\/files\/sja_4009_costa_menton_680x480_laize_rvb_79480.webp?v=1791315618"},{"product_id":"sunbrella-costa-clovely-cushion","title":"Sunbrella Costa Clovely Custom Outdoor Cushion","description":"\u003cp\u003e\u003cstrong\u003eSunbrella Costa Clovely\u003c\/strong\u003e is part of Sunbrella's new Vision collection: a classic stripe on a soft white base with a balanced 12 cm (about 4.7″) repeat. Clovely is a fresh garden green and white stripe. It looks right at home among plants and on painted wood benches. Made from 100% Sunbrella acrylic (260 g\/m²), it has a non-PFAS water-repellent, stain-resistant finish and a 5-year Sunbrella warranty. We make every cushion to order, any shape, with Dry Fast foam available for wet areas and a zippered cover.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing your foam (3-year foam warranty)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Density:\u003c\/strong\u003e a medium feel for everyday seats, chairs and mattresses. 1.8 lb\/ft³ density, 35 lb ILD, lasts about 7 years. For thin dining seats (1″–2″), Luxury foam holds up better.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLuxury:\u003c\/strong\u003e firm, and firmer as it gets thicker (7″–8″ feels very firm unless you weigh over 200 lb). 1.8 lb\/ft³, 50 lb ILD, lasts about 5–8 years. A good pick for dining seats from 1″ to 3″.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Fast:\u003c\/strong\u003e open-cell outdoor foam that lets water drain straight through, for patio, pool and boat cushions. Firm, 1.8 lb\/ft³, 60 lb ILD, lasts about 5–8 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Soft:\u003c\/strong\u003e for sofa back cushions and mattress toppers only, not seats. 1.2 lb\/ft³, 12 lb ILD, lasts about 5 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDacron wrap (optional):\u003c\/strong\u003e a 1″ layer of polyester fiberfill around the foam that rounds the edges and fills the cover. We attach it with fine staples that won't tear the foam or the cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber fill:\u003c\/strong\u003e loose 100% polyester filling for back cushions you want to sink into. Not for seats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEntering your size\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnter every measurement in inches.\u003c\/li\u003e\n\u003cli\u003eSizes between quarter inches are rounded up to the next ¼″.\u003c\/li\u003e\n\u003cli\u003eGive us the finished cushion size. If you add a Dacron wrap, don't make the numbers smaller; we allow for the wrap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePiping and ties\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePiping is a fabric-covered cord sewn into the edge seams. It gives the cushion a neat, defined edge and helps it keep its shape. Ties hold the cushion to the chair frame so it doesn't slide. If you need ties somewhere the options don't cover, \u003ca href=\"mailto:care@fabricakraft.com\"\u003eemail us\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThick cushions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe cut foam up to 6″ thick from one solid piece. From over 6″ to 8″, we glue two layers of the same foam together at no extra charge. For anything over 8″, or to mix two foam types in one cushion, \u003ca href=\"\/en-ca\/pages\/contact\"\u003econtact us\u003c\/a\u003e for a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturing Tolerances\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor custom orders, we cut to within ±0.5″ of your measurements.\u003c\/p\u003e\n","brand":"Sunbrella","offers":[{"title":"Default Title","offer_id":67890828509419,"sku":"SJA-4006-137","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/9018\/5451\/files\/sja_4006_costa_clovely_680x480_laize_rvb_103578.webp?v=1791315619"},{"product_id":"sunbrella-costa-capri-cushion","title":"Sunbrella Costa Capri Custom Outdoor Cushion","description":"\u003cp\u003e\u003cstrong\u003eSunbrella Costa Capri\u003c\/strong\u003e is part of Sunbrella's new Vision collection: a classic stripe on a soft white base with a balanced 12 cm (about 4.7″) repeat. Capri is a deep blue and white stripe with a nautical feel. It suits boats, poolside loungers and coastal porches. Made from 100% Sunbrella acrylic (260 g\/m²), it has a non-PFAS water-repellent, stain-resistant finish and a 5-year Sunbrella warranty. We make every cushion to order, any shape, with Dry Fast foam available for wet areas and a zippered cover.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing your foam (3-year foam warranty)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Density:\u003c\/strong\u003e a medium feel for everyday seats, chairs and mattresses. 1.8 lb\/ft³ density, 35 lb ILD, lasts about 7 years. For thin dining seats (1″–2″), Luxury foam holds up better.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLuxury:\u003c\/strong\u003e firm, and firmer as it gets thicker (7″–8″ feels very firm unless you weigh over 200 lb). 1.8 lb\/ft³, 50 lb ILD, lasts about 5–8 years. A good pick for dining seats from 1″ to 3″.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Fast:\u003c\/strong\u003e open-cell outdoor foam that lets water drain straight through, for patio, pool and boat cushions. Firm, 1.8 lb\/ft³, 60 lb ILD, lasts about 5–8 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Soft:\u003c\/strong\u003e for sofa back cushions and mattress toppers only, not seats. 1.2 lb\/ft³, 12 lb ILD, lasts about 5 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDacron wrap (optional):\u003c\/strong\u003e a 1″ layer of polyester fiberfill around the foam that rounds the edges and fills the cover. We attach it with fine staples that won't tear the foam or the cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber fill:\u003c\/strong\u003e loose 100% polyester filling for back cushions you want to sink into. Not for seats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEntering your size\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnter every measurement in inches.\u003c\/li\u003e\n\u003cli\u003eSizes between quarter inches are rounded up to the next ¼″.\u003c\/li\u003e\n\u003cli\u003eGive us the finished cushion size. If you add a Dacron wrap, don't make the numbers smaller; we allow for the wrap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePiping and ties\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePiping is a fabric-covered cord sewn into the edge seams. It gives the cushion a neat, defined edge and helps it keep its shape. Ties hold the cushion to the chair frame so it doesn't slide. If you need ties somewhere the options don't cover, \u003ca href=\"mailto:care@fabricakraft.com\"\u003eemail us\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThick cushions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe cut foam up to 6″ thick from one solid piece. From over 6″ to 8″, we glue two layers of the same foam together at no extra charge. For anything over 8″, or to mix two foam types in one cushion, \u003ca href=\"\/en-ca\/pages\/contact\"\u003econtact us\u003c\/a\u003e for a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturing Tolerances\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor custom orders, we cut to within ±0.5″ of your measurements.\u003c\/p\u003e\n","brand":"Sunbrella","offers":[{"title":"Default Title","offer_id":67890828542187,"sku":"SJA-4007-137","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/9018\/5451\/files\/sja_4007_costa_capri_680x480_laize_rvb_101610.webp?v=1791315620"},{"product_id":"sunbrella-costa-mumbai-cushion","title":"Sunbrella Costa Mumbai Custom Outdoor Cushion","description":"\u003cp\u003e\u003cstrong\u003eSunbrella Costa Mumbai\u003c\/strong\u003e is part of Sunbrella's new Vision collection: a classic stripe on a soft white base with a balanced 12 cm (about 4.7″) repeat. Mumbai is a bold red and white stripe full of energy. It pairs well with navy, white and natural teak. Made from 100% Sunbrella acrylic (260 g\/m²), it has a non-PFAS water-repellent, stain-resistant finish and a 5-year Sunbrella warranty. We make every cushion to order, any shape, with Dry Fast foam available for wet areas and a zippered cover.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing your foam (3-year foam warranty)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Density:\u003c\/strong\u003e a medium feel for everyday seats, chairs and mattresses. 1.8 lb\/ft³ density, 35 lb ILD, lasts about 7 years. For thin dining seats (1″–2″), Luxury foam holds up better.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLuxury:\u003c\/strong\u003e firm, and firmer as it gets thicker (7″–8″ feels very firm unless you weigh over 200 lb). 1.8 lb\/ft³, 50 lb ILD, lasts about 5–8 years. A good pick for dining seats from 1″ to 3″.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Fast:\u003c\/strong\u003e open-cell outdoor foam that lets water drain straight through, for patio, pool and boat cushions. Firm, 1.8 lb\/ft³, 60 lb ILD, lasts about 5–8 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Soft:\u003c\/strong\u003e for sofa back cushions and mattress toppers only, not seats. 1.2 lb\/ft³, 12 lb ILD, lasts about 5 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDacron wrap (optional):\u003c\/strong\u003e a 1″ layer of polyester fiberfill around the foam that rounds the edges and fills the cover. We attach it with fine staples that won't tear the foam or the cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber fill:\u003c\/strong\u003e loose 100% polyester filling for back cushions you want to sink into. Not for seats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEntering your size\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnter every measurement in inches.\u003c\/li\u003e\n\u003cli\u003eSizes between quarter inches are rounded up to the next ¼″.\u003c\/li\u003e\n\u003cli\u003eGive us the finished cushion size. If you add a Dacron wrap, don't make the numbers smaller; we allow for the wrap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePiping and ties\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePiping is a fabric-covered cord sewn into the edge seams. It gives the cushion a neat, defined edge and helps it keep its shape. Ties hold the cushion to the chair frame so it doesn't slide. If you need ties somewhere the options don't cover, \u003ca href=\"mailto:care@fabricakraft.com\"\u003eemail us\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThick cushions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe cut foam up to 6″ thick from one solid piece. From over 6″ to 8″, we glue two layers of the same foam together at no extra charge. For anything over 8″, or to mix two foam types in one cushion, \u003ca href=\"\/en-ca\/pages\/contact\"\u003econtact us\u003c\/a\u003e for a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturing Tolerances\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor custom orders, we cut to within ±0.5″ of your measurements.\u003c\/p\u003e\n","brand":"Sunbrella","offers":[{"title":"Default Title","offer_id":67890828771563,"sku":"SJA-4010-137","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/9018\/5451\/files\/sja_4010_costa_mumbai_680x480_laize_rvb_58066.webp?v=1791315622"},{"product_id":"sunbrella-costa-middelburg-cushion","title":"Sunbrella Costa Middelburg Custom Outdoor Cushion","description":"\u003cp\u003e\u003cstrong\u003eSunbrella Costa Middelburg\u003c\/strong\u003e is part of Sunbrella's new Vision collection: a classic stripe on a soft white base with a balanced 12 cm (about 4.7″) repeat. Middelburg is a graphic black and white stripe that looks sharp on modern and classic furniture alike. Made from 100% Sunbrella acrylic (260 g\/m²), it has a non-PFAS water-repellent, stain-resistant finish and a 5-year Sunbrella warranty. We make every cushion to order, any shape, with Dry Fast foam available for wet areas and a zippered cover.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing your foam (3-year foam warranty)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Density:\u003c\/strong\u003e a medium feel for everyday seats, chairs and mattresses. 1.8 lb\/ft³ density, 35 lb ILD, lasts about 7 years. For thin dining seats (1″–2″), Luxury foam holds up better.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLuxury:\u003c\/strong\u003e firm, and firmer as it gets thicker (7″–8″ feels very firm unless you weigh over 200 lb). 1.8 lb\/ft³, 50 lb ILD, lasts about 5–8 years. A good pick for dining seats from 1″ to 3″.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Fast:\u003c\/strong\u003e open-cell outdoor foam that lets water drain straight through, for patio, pool and boat cushions. Firm, 1.8 lb\/ft³, 60 lb ILD, lasts about 5–8 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Soft:\u003c\/strong\u003e for sofa back cushions and mattress toppers only, not seats. 1.2 lb\/ft³, 12 lb ILD, lasts about 5 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDacron wrap (optional):\u003c\/strong\u003e a 1″ layer of polyester fiberfill around the foam that rounds the edges and fills the cover. We attach it with fine staples that won't tear the foam or the cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber fill:\u003c\/strong\u003e loose 100% polyester filling for back cushions you want to sink into. Not for seats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEntering your size\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnter every measurement in inches.\u003c\/li\u003e\n\u003cli\u003eSizes between quarter inches are rounded up to the next ¼″.\u003c\/li\u003e\n\u003cli\u003eGive us the finished cushion size. If you add a Dacron wrap, don't make the numbers smaller; we allow for the wrap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePiping and ties\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePiping is a fabric-covered cord sewn into the edge seams. It gives the cushion a neat, defined edge and helps it keep its shape. Ties hold the cushion to the chair frame so it doesn't slide. If you need ties somewhere the options don't cover, \u003ca href=\"mailto:care@fabricakraft.com\"\u003eemail us\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThick cushions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe cut foam up to 6″ thick from one solid piece. From over 6″ to 8″, we glue two layers of the same foam together at no extra charge. For anything over 8″, or to mix two foam types in one cushion, \u003ca href=\"\/en-ca\/pages\/contact\"\u003econtact us\u003c\/a\u003e for a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturing Tolerances\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor custom orders, we cut to within ±0.5″ of your measurements.\u003c\/p\u003e\n","brand":"Sunbrella","offers":[{"title":"Default Title","offer_id":67890829197547,"sku":"SJA-4005-137","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/9018\/5451\/files\/sja_4005_costa_middelburg_680x480_laize_rvb_96077.webp?v=1791315623"},{"product_id":"sunbrella-aveiro-neroli-cushion","title":"Sunbrella Aveiro Neroli Custom Outdoor Cushion","description":"\u003cp\u003e\u003cstrong\u003eSunbrella Aveiro Neroli\u003c\/strong\u003e is part of Sunbrella's new Vision collection: a heavy, chunky textured weave with a wide 20 cm (about 7.9″) stripe repeat. Neroli combines warm taupe and cream for a soft, tailored stripe. It adds texture to deep seating and daybeds while staying neutral. Made from 100% Sunbrella acrylic (680 g\/m²), it has a non-PFAS water-repellent, stain-resistant finish and a 5-year Sunbrella warranty. We make every cushion to order, any shape, with Dry Fast foam available for wet areas and a zippered cover.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing your foam (3-year foam warranty)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Density:\u003c\/strong\u003e a medium feel for everyday seats, chairs and mattresses. 1.8 lb\/ft³ density, 35 lb ILD, lasts about 7 years. For thin dining seats (1″–2″), Luxury foam holds up better.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLuxury:\u003c\/strong\u003e firm, and firmer as it gets thicker (7″–8″ feels very firm unless you weigh over 200 lb). 1.8 lb\/ft³, 50 lb ILD, lasts about 5–8 years. A good pick for dining seats from 1″ to 3″.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Fast:\u003c\/strong\u003e open-cell outdoor foam that lets water drain straight through, for patio, pool and boat cushions. Firm, 1.8 lb\/ft³, 60 lb ILD, lasts about 5–8 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Soft:\u003c\/strong\u003e for sofa back cushions and mattress toppers only, not seats. 1.2 lb\/ft³, 12 lb ILD, lasts about 5 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDacron wrap (optional):\u003c\/strong\u003e a 1″ layer of polyester fiberfill around the foam that rounds the edges and fills the cover. We attach it with fine staples that won't tear the foam or the cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber fill:\u003c\/strong\u003e loose 100% polyester filling for back cushions you want to sink into. Not for seats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEntering your size\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnter every measurement in inches.\u003c\/li\u003e\n\u003cli\u003eSizes between quarter inches are rounded up to the next ¼″.\u003c\/li\u003e\n\u003cli\u003eGive us the finished cushion size. If you add a Dacron wrap, don't make the numbers smaller; we allow for the wrap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePiping and ties\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePiping is a fabric-covered cord sewn into the edge seams. It gives the cushion a neat, defined edge and helps it keep its shape. Ties hold the cushion to the chair frame so it doesn't slide. If you need ties somewhere the options don't cover, \u003ca href=\"mailto:care@fabricakraft.com\"\u003eemail us\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThick cushions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe cut foam up to 6″ thick from one solid piece. From over 6″ to 8″, we glue two layers of the same foam together at no extra charge. For anything over 8″, or to mix two foam types in one cushion, \u003ca href=\"\/en-ca\/pages\/contact\"\u003econtact us\u003c\/a\u003e for a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturing Tolerances\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor custom orders, we cut to within ±0.5″ of your measurements.\u003c\/p\u003e\n","brand":"Sunbrella","offers":[{"title":"Default Title","offer_id":67890829230315,"sku":"AVE-R098-140","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/9018\/5451\/files\/ave_r098_aveiro_neroli_680x480_laize_rvb_90417.webp?v=1791315624"},{"product_id":"sunbrella-aveiro-tiare-cushion","title":"Sunbrella Aveiro Tiare Custom Outdoor Cushion","description":"\u003cp\u003e\u003cstrong\u003eSunbrella Aveiro Tiare\u003c\/strong\u003e is part of Sunbrella's new Vision collection: a heavy, chunky textured weave with a wide 20 cm (about 7.9″) stripe repeat. Tiare mixes golden ochre and cream in a chunky weave. It brings warmth to outdoor sofas and pairs with natural wood and rattan. Made from 100% Sunbrella acrylic (680 g\/m²), it has a non-PFAS water-repellent, stain-resistant finish and a 5-year Sunbrella warranty. We make every cushion to order, any shape, with Dry Fast foam available for wet areas and a zippered cover.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing your foam (3-year foam warranty)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Density:\u003c\/strong\u003e a medium feel for everyday seats, chairs and mattresses. 1.8 lb\/ft³ density, 35 lb ILD, lasts about 7 years. For thin dining seats (1″–2″), Luxury foam holds up better.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLuxury:\u003c\/strong\u003e firm, and firmer as it gets thicker (7″–8″ feels very firm unless you weigh over 200 lb). 1.8 lb\/ft³, 50 lb ILD, lasts about 5–8 years. A good pick for dining seats from 1″ to 3″.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Fast:\u003c\/strong\u003e open-cell outdoor foam that lets water drain straight through, for patio, pool and boat cushions. Firm, 1.8 lb\/ft³, 60 lb ILD, lasts about 5–8 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Soft:\u003c\/strong\u003e for sofa back cushions and mattress toppers only, not seats. 1.2 lb\/ft³, 12 lb ILD, lasts about 5 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDacron wrap (optional):\u003c\/strong\u003e a 1″ layer of polyester fiberfill around the foam that rounds the edges and fills the cover. We attach it with fine staples that won't tear the foam or the cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber fill:\u003c\/strong\u003e loose 100% polyester filling for back cushions you want to sink into. Not for seats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEntering your size\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnter every measurement in inches.\u003c\/li\u003e\n\u003cli\u003eSizes between quarter inches are rounded up to the next ¼″.\u003c\/li\u003e\n\u003cli\u003eGive us the finished cushion size. If you add a Dacron wrap, don't make the numbers smaller; we allow for the wrap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePiping and ties\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePiping is a fabric-covered cord sewn into the edge seams. It gives the cushion a neat, defined edge and helps it keep its shape. Ties hold the cushion to the chair frame so it doesn't slide. If you need ties somewhere the options don't cover, \u003ca href=\"mailto:care@fabricakraft.com\"\u003eemail us\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThick cushions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe cut foam up to 6″ thick from one solid piece. From over 6″ to 8″, we glue two layers of the same foam together at no extra charge. For anything over 8″, or to mix two foam types in one cushion, \u003ca href=\"\/en-ca\/pages\/contact\"\u003econtact us\u003c\/a\u003e for a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturing Tolerances\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor custom orders, we cut to within ±0.5″ of your measurements.\u003c\/p\u003e\n","brand":"Sunbrella","offers":[{"title":"Default Title","offer_id":67890867110123,"sku":"AVE-R099-140","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/9018\/5451\/files\/ave_r099_aveiro_tiare_680x480_laize_rvb_106297.webp?v=1791315789"},{"product_id":"sunbrella-aveiro-santal-cushion","title":"Sunbrella Aveiro Santal Custom Outdoor Cushion","description":"\u003cp\u003e\u003cstrong\u003eSunbrella Aveiro Santal\u003c\/strong\u003e is part of Sunbrella's new Vision collection: a heavy, chunky textured weave with a wide 20 cm (about 7.9″) stripe repeat. Santal pairs a rust-red texture with cream for an earthy, Mediterranean feel. It looks great with terracotta and olive trees. Made from 100% Sunbrella acrylic (680 g\/m²), it has a non-PFAS water-repellent, stain-resistant finish and a 5-year Sunbrella warranty. We make every cushion to order, any shape, with Dry Fast foam available for wet areas and a zippered cover.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing your foam (3-year foam warranty)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Density:\u003c\/strong\u003e a medium feel for everyday seats, chairs and mattresses. 1.8 lb\/ft³ density, 35 lb ILD, lasts about 7 years. For thin dining seats (1″–2″), Luxury foam holds up better.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLuxury:\u003c\/strong\u003e firm, and firmer as it gets thicker (7″–8″ feels very firm unless you weigh over 200 lb). 1.8 lb\/ft³, 50 lb ILD, lasts about 5–8 years. A good pick for dining seats from 1″ to 3″.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Fast:\u003c\/strong\u003e open-cell outdoor foam that lets water drain straight through, for patio, pool and boat cushions. Firm, 1.8 lb\/ft³, 60 lb ILD, lasts about 5–8 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Soft:\u003c\/strong\u003e for sofa back cushions and mattress toppers only, not seats. 1.2 lb\/ft³, 12 lb ILD, lasts about 5 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDacron wrap (optional):\u003c\/strong\u003e a 1″ layer of polyester fiberfill around the foam that rounds the edges and fills the cover. We attach it with fine staples that won't tear the foam or the cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber fill:\u003c\/strong\u003e loose 100% polyester filling for back cushions you want to sink into. Not for seats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEntering your size\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnter every measurement in inches.\u003c\/li\u003e\n\u003cli\u003eSizes between quarter inches are rounded up to the next ¼″.\u003c\/li\u003e\n\u003cli\u003eGive us the finished cushion size. If you add a Dacron wrap, don't make the numbers smaller; we allow for the wrap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePiping and ties\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePiping is a fabric-covered cord sewn into the edge seams. It gives the cushion a neat, defined edge and helps it keep its shape. Ties hold the cushion to the chair frame so it doesn't slide. If you need ties somewhere the options don't cover, \u003ca href=\"mailto:care@fabricakraft.com\"\u003eemail us\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThick cushions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe cut foam up to 6″ thick from one solid piece. From over 6″ to 8″, we glue two layers of the same foam together at no extra charge. For anything over 8″, or to mix two foam types in one cushion, \u003ca href=\"\/en-ca\/pages\/contact\"\u003econtact us\u003c\/a\u003e for a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturing Tolerances\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor custom orders, we cut to within ±0.5″ of your measurements.\u003c\/p\u003e\n","brand":"Sunbrella","offers":[{"title":"Default Title","offer_id":67890867175659,"sku":"AVE-R101-140","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/9018\/5451\/files\/ave_r101_aveiro_santal_680x480_laize_rvb_123039.webp?v=1791315790"},{"product_id":"sunbrella-aveiro-tonka-cushion","title":"Sunbrella Aveiro Tonka Custom Outdoor Cushion","description":"\u003cp\u003e\u003cstrong\u003eSunbrella Aveiro Tonka\u003c\/strong\u003e is part of Sunbrella's new Vision collection: a heavy, chunky textured weave with a wide 20 cm (about 7.9″) stripe repeat. Tonka mixes black and white in a bold, graphic weave. It gives modern furniture a strong, designer look. Made from 100% Sunbrella acrylic (680 g\/m²), it has a non-PFAS water-repellent, stain-resistant finish and a 5-year Sunbrella warranty. We make every cushion to order, any shape, with Dry Fast foam available for wet areas and a zippered cover.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing your foam (3-year foam warranty)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Density:\u003c\/strong\u003e a medium feel for everyday seats, chairs and mattresses. 1.8 lb\/ft³ density, 35 lb ILD, lasts about 7 years. For thin dining seats (1″–2″), Luxury foam holds up better.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLuxury:\u003c\/strong\u003e firm, and firmer as it gets thicker (7″–8″ feels very firm unless you weigh over 200 lb). 1.8 lb\/ft³, 50 lb ILD, lasts about 5–8 years. A good pick for dining seats from 1″ to 3″.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Fast:\u003c\/strong\u003e open-cell outdoor foam that lets water drain straight through, for patio, pool and boat cushions. Firm, 1.8 lb\/ft³, 60 lb ILD, lasts about 5–8 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Soft:\u003c\/strong\u003e for sofa back cushions and mattress toppers only, not seats. 1.2 lb\/ft³, 12 lb ILD, lasts about 5 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDacron wrap (optional):\u003c\/strong\u003e a 1″ layer of polyester fiberfill around the foam that rounds the edges and fills the cover. We attach it with fine staples that won't tear the foam or the cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber fill:\u003c\/strong\u003e loose 100% polyester filling for back cushions you want to sink into. Not for seats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEntering your size\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnter every measurement in inches.\u003c\/li\u003e\n\u003cli\u003eSizes between quarter inches are rounded up to the next ¼″.\u003c\/li\u003e\n\u003cli\u003eGive us the finished cushion size. If you add a Dacron wrap, don't make the numbers smaller; we allow for the wrap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePiping and ties\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePiping is a fabric-covered cord sewn into the edge seams. It gives the cushion a neat, defined edge and helps it keep its shape. Ties hold the cushion to the chair frame so it doesn't slide. If you need ties somewhere the options don't cover, \u003ca href=\"mailto:care@fabricakraft.com\"\u003eemail us\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThick cushions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe cut foam up to 6″ thick from one solid piece. From over 6″ to 8″, we glue two layers of the same foam together at no extra charge. For anything over 8″, or to mix two foam types in one cushion, \u003ca href=\"\/en-ca\/pages\/contact\"\u003econtact us\u003c\/a\u003e for a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturing Tolerances\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor custom orders, we cut to within ±0.5″ of your measurements.\u003c\/p\u003e\n","brand":"Sunbrella","offers":[{"title":"Default Title","offer_id":67890867241195,"sku":"AVE-R100-140","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/9018\/5451\/files\/ave_r100_aveiro_tonka_680x480_laize_rvb_160033.webp?v=1791315791"},{"product_id":"sunbrella-flavour-jasmine-cushion","title":"Sunbrella Flavour Jasmine Custom Outdoor Cushion","description":"\u003cp\u003e\u003cstrong\u003eSunbrella Flavour Jasmine\u003c\/strong\u003e is part of Sunbrella's new Vision collection: a nubby, hand-woven-looking texture in a single rich tone. Jasmine is a textured warm white with a cozy, bouclé-like feel. It keeps covered porches and sunrooms bright and soft. Made from 100% Sunbrella acrylic (530 g\/m²), it has a non-PFAS water-repellent, stain-resistant finish and a 5-year Sunbrella warranty. We make every cushion to order, any shape, with Dry Fast foam available for wet areas and a zippered cover.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing your foam (3-year foam warranty)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Density:\u003c\/strong\u003e a medium feel for everyday seats, chairs and mattresses. 1.8 lb\/ft³ density, 35 lb ILD, lasts about 7 years. For thin dining seats (1″–2″), Luxury foam holds up better.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLuxury:\u003c\/strong\u003e firm, and firmer as it gets thicker (7″–8″ feels very firm unless you weigh over 200 lb). 1.8 lb\/ft³, 50 lb ILD, lasts about 5–8 years. A good pick for dining seats from 1″ to 3″.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Fast:\u003c\/strong\u003e open-cell outdoor foam that lets water drain straight through, for patio, pool and boat cushions. Firm, 1.8 lb\/ft³, 60 lb ILD, lasts about 5–8 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Soft:\u003c\/strong\u003e for sofa back cushions and mattress toppers only, not seats. 1.2 lb\/ft³, 12 lb ILD, lasts about 5 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDacron wrap (optional):\u003c\/strong\u003e a 1″ layer of polyester fiberfill around the foam that rounds the edges and fills the cover. We attach it with fine staples that won't tear the foam or the cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber fill:\u003c\/strong\u003e loose 100% polyester filling for back cushions you want to sink into. Not for seats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEntering your size\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnter every measurement in inches.\u003c\/li\u003e\n\u003cli\u003eSizes between quarter inches are rounded up to the next ¼″.\u003c\/li\u003e\n\u003cli\u003eGive us the finished cushion size. If you add a Dacron wrap, don't make the numbers smaller; we allow for the wrap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePiping and ties\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePiping is a fabric-covered cord sewn into the edge seams. It gives the cushion a neat, defined edge and helps it keep its shape. Ties hold the cushion to the chair frame so it doesn't slide. If you need ties somewhere the options don't cover, \u003ca href=\"mailto:care@fabricakraft.com\"\u003eemail us\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThick cushions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe cut foam up to 6″ thick from one solid piece. From over 6″ to 8″, we glue two layers of the same foam together at no extra charge. For anything over 8″, or to mix two foam types in one cushion, \u003ca href=\"\/en-ca\/pages\/contact\"\u003econtact us\u003c\/a\u003e for a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturing Tolerances\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor custom orders, we cut to within ±0.5″ of your measurements.\u003c\/p\u003e\n","brand":"Sunbrella","offers":[{"title":"Default Title","offer_id":67890867273963,"sku":"FLA-J698-140","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/9018\/5451\/files\/fla_j698_flavour_jasmine_680x480_rvb_78617.webp?v=1791315793"},{"product_id":"sunbrella-flavour-amber-cushion","title":"Sunbrella Flavour Amber Custom Outdoor Cushion","description":"\u003cp\u003e\u003cstrong\u003eSunbrella Flavour Amber\u003c\/strong\u003e is part of Sunbrella's new Vision collection: a nubby, hand-woven-looking texture in a single rich tone. Amber is a rich golden mustard with a nubby texture. It adds warmth to gray or wood furniture. Made from 100% Sunbrella acrylic (530 g\/m²), it has a non-PFAS water-repellent, stain-resistant finish and a 5-year Sunbrella warranty. We make every cushion to order, any shape, with Dry Fast foam available for wet areas and a zippered cover.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing your foam (3-year foam warranty)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Density:\u003c\/strong\u003e a medium feel for everyday seats, chairs and mattresses. 1.8 lb\/ft³ density, 35 lb ILD, lasts about 7 years. For thin dining seats (1″–2″), Luxury foam holds up better.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLuxury:\u003c\/strong\u003e firm, and firmer as it gets thicker (7″–8″ feels very firm unless you weigh over 200 lb). 1.8 lb\/ft³, 50 lb ILD, lasts about 5–8 years. A good pick for dining seats from 1″ to 3″.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Fast:\u003c\/strong\u003e open-cell outdoor foam that lets water drain straight through, for patio, pool and boat cushions. Firm, 1.8 lb\/ft³, 60 lb ILD, lasts about 5–8 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Soft:\u003c\/strong\u003e for sofa back cushions and mattress toppers only, not seats. 1.2 lb\/ft³, 12 lb ILD, lasts about 5 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDacron wrap (optional):\u003c\/strong\u003e a 1″ layer of polyester fiberfill around the foam that rounds the edges and fills the cover. We attach it with fine staples that won't tear the foam or the cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber fill:\u003c\/strong\u003e loose 100% polyester filling for back cushions you want to sink into. Not for seats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEntering your size\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnter every measurement in inches.\u003c\/li\u003e\n\u003cli\u003eSizes between quarter inches are rounded up to the next ¼″.\u003c\/li\u003e\n\u003cli\u003eGive us the finished cushion size. If you add a Dacron wrap, don't make the numbers smaller; we allow for the wrap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePiping and ties\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePiping is a fabric-covered cord sewn into the edge seams. It gives the cushion a neat, defined edge and helps it keep its shape. Ties hold the cushion to the chair frame so it doesn't slide. If you need ties somewhere the options don't cover, \u003ca href=\"mailto:care@fabricakraft.com\"\u003eemail us\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThick cushions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe cut foam up to 6″ thick from one solid piece. From over 6″ to 8″, we glue two layers of the same foam together at no extra charge. For anything over 8″, or to mix two foam types in one cushion, \u003ca href=\"\/en-ca\/pages\/contact\"\u003econtact us\u003c\/a\u003e for a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturing Tolerances\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor custom orders, we cut to within ±0.5″ of your measurements.\u003c\/p\u003e\n","brand":"Sunbrella","offers":[{"title":"Default Title","offer_id":67890867306731,"sku":"FLA-J702-140","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/9018\/5451\/files\/fla_j702_flavour_amber_680x480_rvb_112302.webp?v=1791315794"},{"product_id":"sunbrella-flavour-musc-cushion","title":"Sunbrella Flavour Musc Custom Outdoor Cushion","description":"\u003cp\u003e\u003cstrong\u003eSunbrella Flavour Musc\u003c\/strong\u003e is part of Sunbrella's new Vision collection: a nubby, hand-woven-looking texture in a single rich tone. Musc is a soft greige that mixes gray and beige in a textured weave. It is an easy neutral for any setting. Made from 100% Sunbrella acrylic (530 g\/m²), it has a non-PFAS water-repellent, stain-resistant finish and a 5-year Sunbrella warranty. We make every cushion to order, any shape, with Dry Fast foam available for wet areas and a zippered cover.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing your foam (3-year foam warranty)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Density:\u003c\/strong\u003e a medium feel for everyday seats, chairs and mattresses. 1.8 lb\/ft³ density, 35 lb ILD, lasts about 7 years. For thin dining seats (1″–2″), Luxury foam holds up better.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLuxury:\u003c\/strong\u003e firm, and firmer as it gets thicker (7″–8″ feels very firm unless you weigh over 200 lb). 1.8 lb\/ft³, 50 lb ILD, lasts about 5–8 years. A good pick for dining seats from 1″ to 3″.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Fast:\u003c\/strong\u003e open-cell outdoor foam that lets water drain straight through, for patio, pool and boat cushions. Firm, 1.8 lb\/ft³, 60 lb ILD, lasts about 5–8 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Soft:\u003c\/strong\u003e for sofa back cushions and mattress toppers only, not seats. 1.2 lb\/ft³, 12 lb ILD, lasts about 5 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDacron wrap (optional):\u003c\/strong\u003e a 1″ layer of polyester fiberfill around the foam that rounds the edges and fills the cover. We attach it with fine staples that won't tear the foam or the cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber fill:\u003c\/strong\u003e loose 100% polyester filling for back cushions you want to sink into. Not for seats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEntering your size\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnter every measurement in inches.\u003c\/li\u003e\n\u003cli\u003eSizes between quarter inches are rounded up to the next ¼″.\u003c\/li\u003e\n\u003cli\u003eGive us the finished cushion size. If you add a Dacron wrap, don't make the numbers smaller; we allow for the wrap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePiping and ties\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePiping is a fabric-covered cord sewn into the edge seams. It gives the cushion a neat, defined edge and helps it keep its shape. Ties hold the cushion to the chair frame so it doesn't slide. If you need ties somewhere the options don't cover, \u003ca href=\"mailto:care@fabricakraft.com\"\u003eemail us\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThick cushions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe cut foam up to 6″ thick from one solid piece. From over 6″ to 8″, we glue two layers of the same foam together at no extra charge. For anything over 8″, or to mix two foam types in one cushion, \u003ca href=\"\/en-ca\/pages\/contact\"\u003econtact us\u003c\/a\u003e for a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturing Tolerances\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor custom orders, we cut to within ±0.5″ of your measurements.\u003c\/p\u003e\n","brand":"Sunbrella","offers":[{"title":"Default Title","offer_id":67890867372267,"sku":"FLA-J700-140","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/9018\/5451\/files\/fla_j700_flavour_musc_680x480_rvb_101916.webp?v=1791315796"},{"product_id":"sunbrella-flavour-smoky-cushion","title":"Sunbrella Flavour Smoky Custom Outdoor Cushion","description":"\u003cp\u003e\u003cstrong\u003eSunbrella Flavour Smoky\u003c\/strong\u003e is part of Sunbrella's new Vision collection: a nubby, hand-woven-looking texture in a single rich tone. Smoky is a deep brown-gray with a chunky texture. It grounds a seating area and hides wear well. Made from 100% Sunbrella acrylic (530 g\/m²), it has a non-PFAS water-repellent, stain-resistant finish and a 5-year Sunbrella warranty. We make every cushion to order, any shape, with Dry Fast foam available for wet areas and a zippered cover.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing your foam (3-year foam warranty)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Density:\u003c\/strong\u003e a medium feel for everyday seats, chairs and mattresses. 1.8 lb\/ft³ density, 35 lb ILD, lasts about 7 years. For thin dining seats (1″–2″), Luxury foam holds up better.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLuxury:\u003c\/strong\u003e firm, and firmer as it gets thicker (7″–8″ feels very firm unless you weigh over 200 lb). 1.8 lb\/ft³, 50 lb ILD, lasts about 5–8 years. A good pick for dining seats from 1″ to 3″.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Fast:\u003c\/strong\u003e open-cell outdoor foam that lets water drain straight through, for patio, pool and boat cushions. Firm, 1.8 lb\/ft³, 60 lb ILD, lasts about 5–8 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Soft:\u003c\/strong\u003e for sofa back cushions and mattress toppers only, not seats. 1.2 lb\/ft³, 12 lb ILD, lasts about 5 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDacron wrap (optional):\u003c\/strong\u003e a 1″ layer of polyester fiberfill around the foam that rounds the edges and fills the cover. We attach it with fine staples that won't tear the foam or the cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber fill:\u003c\/strong\u003e loose 100% polyester filling for back cushions you want to sink into. Not for seats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEntering your size\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnter every measurement in inches.\u003c\/li\u003e\n\u003cli\u003eSizes between quarter inches are rounded up to the next ¼″.\u003c\/li\u003e\n\u003cli\u003eGive us the finished cushion size. If you add a Dacron wrap, don't make the numbers smaller; we allow for the wrap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePiping and ties\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePiping is a fabric-covered cord sewn into the edge seams. It gives the cushion a neat, defined edge and helps it keep its shape. Ties hold the cushion to the chair frame so it doesn't slide. If you need ties somewhere the options don't cover, \u003ca href=\"mailto:care@fabricakraft.com\"\u003eemail us\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThick cushions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe cut foam up to 6″ thick from one solid piece. From over 6″ to 8″, we glue two layers of the same foam together at no extra charge. For anything over 8″, or to mix two foam types in one cushion, \u003ca href=\"\/en-ca\/pages\/contact\"\u003econtact us\u003c\/a\u003e for a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturing Tolerances\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor custom orders, we cut to within ±0.5″ of your measurements.\u003c\/p\u003e\n","brand":"Sunbrella","offers":[{"title":"Default Title","offer_id":67890867437803,"sku":"FLA-J705-140","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/9018\/5451\/files\/fla_j705_flavour_smoky_680x480_rvb_123070.webp?v=1791315796"},{"product_id":"sunbrella-flavour-mandarin-cushion","title":"Sunbrella Flavour Mandarin Custom Outdoor Cushion","description":"\u003cp\u003e\u003cstrong\u003eSunbrella Flavour Mandarin\u003c\/strong\u003e is part of Sunbrella's new Vision collection: a nubby, hand-woven-looking texture in a single rich tone. Mandarin is a soft, juicy orange with a textured surface. It brings cheerful color to white or natural frames. Made from 100% Sunbrella acrylic (530 g\/m²), it has a non-PFAS water-repellent, stain-resistant finish and a 5-year Sunbrella warranty. We make every cushion to order, any shape, with Dry Fast foam available for wet areas and a zippered cover.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing your foam (3-year foam warranty)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Density:\u003c\/strong\u003e a medium feel for everyday seats, chairs and mattresses. 1.8 lb\/ft³ density, 35 lb ILD, lasts about 7 years. For thin dining seats (1″–2″), Luxury foam holds up better.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLuxury:\u003c\/strong\u003e firm, and firmer as it gets thicker (7″–8″ feels very firm unless you weigh over 200 lb). 1.8 lb\/ft³, 50 lb ILD, lasts about 5–8 years. A good pick for dining seats from 1″ to 3″.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Fast:\u003c\/strong\u003e open-cell outdoor foam that lets water drain straight through, for patio, pool and boat cushions. Firm, 1.8 lb\/ft³, 60 lb ILD, lasts about 5–8 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Soft:\u003c\/strong\u003e for sofa back cushions and mattress toppers only, not seats. 1.2 lb\/ft³, 12 lb ILD, lasts about 5 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDacron wrap (optional):\u003c\/strong\u003e a 1″ layer of polyester fiberfill around the foam that rounds the edges and fills the cover. We attach it with fine staples that won't tear the foam or the cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber fill:\u003c\/strong\u003e loose 100% polyester filling for back cushions you want to sink into. Not for seats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEntering your size\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnter every measurement in inches.\u003c\/li\u003e\n\u003cli\u003eSizes between quarter inches are rounded up to the next ¼″.\u003c\/li\u003e\n\u003cli\u003eGive us the finished cushion size. If you add a Dacron wrap, don't make the numbers smaller; we allow for the wrap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePiping and ties\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePiping is a fabric-covered cord sewn into the edge seams. It gives the cushion a neat, defined edge and helps it keep its shape. Ties hold the cushion to the chair frame so it doesn't slide. If you need ties somewhere the options don't cover, \u003ca href=\"mailto:care@fabricakraft.com\"\u003eemail us\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThick cushions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe cut foam up to 6″ thick from one solid piece. From over 6″ to 8″, we glue two layers of the same foam together at no extra charge. For anything over 8″, or to mix two foam types in one cushion, \u003ca href=\"\/en-ca\/pages\/contact\"\u003econtact us\u003c\/a\u003e for a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturing Tolerances\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor custom orders, we cut to within ±0.5″ of your measurements.\u003c\/p\u003e\n","brand":"Sunbrella","offers":[{"title":"Default Title","offer_id":67890867503339,"sku":"FLA-J701-140","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/9018\/5451\/files\/fla_j701_flavour_mandarine_680x480_rvb_116716.webp?v=1791315798"},{"product_id":"sunbrella-flavour-floral-cushion","title":"Sunbrella Flavour Floral Custom Outdoor Cushion","description":"\u003cp\u003e\u003cstrong\u003eSunbrella Flavour Floral\u003c\/strong\u003e is part of Sunbrella's new Vision collection: a nubby, hand-woven-looking texture in a single rich tone. Floral is a pale blush pink with a cozy texture. It is soft and inviting on window seats, garden benches and daybeds. Made from 100% Sunbrella acrylic (530 g\/m²), it has a non-PFAS water-repellent, stain-resistant finish and a 5-year Sunbrella warranty. We make every cushion to order, any shape, with Dry Fast foam available for wet areas and a zippered cover.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing your foam (3-year foam warranty)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Density:\u003c\/strong\u003e a medium feel for everyday seats, chairs and mattresses. 1.8 lb\/ft³ density, 35 lb ILD, lasts about 7 years. For thin dining seats (1″–2″), Luxury foam holds up better.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLuxury:\u003c\/strong\u003e firm, and firmer as it gets thicker (7″–8″ feels very firm unless you weigh over 200 lb). 1.8 lb\/ft³, 50 lb ILD, lasts about 5–8 years. A good pick for dining seats from 1″ to 3″.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Fast:\u003c\/strong\u003e open-cell outdoor foam that lets water drain straight through, for patio, pool and boat cushions. Firm, 1.8 lb\/ft³, 60 lb ILD, lasts about 5–8 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Soft:\u003c\/strong\u003e for sofa back cushions and mattress toppers only, not seats. 1.2 lb\/ft³, 12 lb ILD, lasts about 5 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDacron wrap (optional):\u003c\/strong\u003e a 1″ layer of polyester fiberfill around the foam that rounds the edges and fills the cover. We attach it with fine staples that won't tear the foam or the cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber fill:\u003c\/strong\u003e loose 100% polyester filling for back cushions you want to sink into. Not for seats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEntering your size\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnter every measurement in inches.\u003c\/li\u003e\n\u003cli\u003eSizes between quarter inches are rounded up to the next ¼″.\u003c\/li\u003e\n\u003cli\u003eGive us the finished cushion size. If you add a Dacron wrap, don't make the numbers smaller; we allow for the wrap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePiping and ties\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePiping is a fabric-covered cord sewn into the edge seams. It gives the cushion a neat, defined edge and helps it keep its shape. Ties hold the cushion to the chair frame so it doesn't slide. If you need ties somewhere the options don't cover, \u003ca href=\"mailto:care@fabricakraft.com\"\u003eemail us\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThick cushions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe cut foam up to 6″ thick from one solid piece. From over 6″ to 8″, we glue two layers of the same foam together at no extra charge. For anything over 8″, or to mix two foam types in one cushion, \u003ca href=\"\/en-ca\/pages\/contact\"\u003econtact us\u003c\/a\u003e for a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturing Tolerances\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor custom orders, we cut to within ±0.5″ of your measurements.\u003c\/p\u003e\n","brand":"Sunbrella","offers":[{"title":"Default Title","offer_id":67890872516843,"sku":"FLA-J699-140","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/9018\/5451\/files\/fla_j699_flavour_floral_680x480_rvb_88888.webp?v=1791315969"},{"product_id":"sunbrella-flavour-vetyver-cushion","title":"Sunbrella Flavour Vetyver Custom Outdoor Cushion","description":"\u003cp\u003e\u003cstrong\u003eSunbrella Flavour Vetyver\u003c\/strong\u003e is part of Sunbrella's new Vision collection: a nubby, hand-woven-looking texture in a single rich tone. Vetyver is a muted sage green with a textured look. It blends with gardens, teak and stone. Made from 100% Sunbrella acrylic (530 g\/m²), it has a non-PFAS water-repellent, stain-resistant finish and a 5-year Sunbrella warranty. We make every cushion to order, any shape, with Dry Fast foam available for wet areas and a zippered cover.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing your foam (3-year foam warranty)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Density:\u003c\/strong\u003e a medium feel for everyday seats, chairs and mattresses. 1.8 lb\/ft³ density, 35 lb ILD, lasts about 7 years. For thin dining seats (1″–2″), Luxury foam holds up better.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLuxury:\u003c\/strong\u003e firm, and firmer as it gets thicker (7″–8″ feels very firm unless you weigh over 200 lb). 1.8 lb\/ft³, 50 lb ILD, lasts about 5–8 years. A good pick for dining seats from 1″ to 3″.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Fast:\u003c\/strong\u003e open-cell outdoor foam that lets water drain straight through, for patio, pool and boat cushions. Firm, 1.8 lb\/ft³, 60 lb ILD, lasts about 5–8 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Soft:\u003c\/strong\u003e for sofa back cushions and mattress toppers only, not seats. 1.2 lb\/ft³, 12 lb ILD, lasts about 5 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDacron wrap (optional):\u003c\/strong\u003e a 1″ layer of polyester fiberfill around the foam that rounds the edges and fills the cover. We attach it with fine staples that won't tear the foam or the cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber fill:\u003c\/strong\u003e loose 100% polyester filling for back cushions you want to sink into. Not for seats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEntering your size\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnter every measurement in inches.\u003c\/li\u003e\n\u003cli\u003eSizes between quarter inches are rounded up to the next ¼″.\u003c\/li\u003e\n\u003cli\u003eGive us the finished cushion size. If you add a Dacron wrap, don't make the numbers smaller; we allow for the wrap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePiping and ties\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePiping is a fabric-covered cord sewn into the edge seams. It gives the cushion a neat, defined edge and helps it keep its shape. Ties hold the cushion to the chair frame so it doesn't slide. If you need ties somewhere the options don't cover, \u003ca href=\"mailto:care@fabricakraft.com\"\u003eemail us\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThick cushions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe cut foam up to 6″ thick from one solid piece. From over 6″ to 8″, we glue two layers of the same foam together at no extra charge. For anything over 8″, or to mix two foam types in one cushion, \u003ca href=\"\/en-ca\/pages\/contact\"\u003econtact us\u003c\/a\u003e for a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturing Tolerances\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor custom orders, we cut to within ±0.5″ of your measurements.\u003c\/p\u003e\n","brand":"Sunbrella","offers":[{"title":"Default Title","offer_id":67890872615147,"sku":"FLA-J703-140","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/9018\/5451\/files\/fla_j703_flavour_vetyver_680x480_rvb_117268.webp?v=1791315970"},{"product_id":"sunbrella-flavour-aquatic-cushion","title":"Sunbrella Flavour Aquatic Custom Outdoor Cushion","description":"\u003cp\u003e\u003cstrong\u003eSunbrella Flavour Aquatic\u003c\/strong\u003e is part of Sunbrella's new Vision collection: a nubby, hand-woven-looking texture in a single rich tone. Aquatic is a bright pool blue with a nubby texture. It suits poolside loungers, boats and coastal porches. Made from 100% Sunbrella acrylic (530 g\/m²), it has a non-PFAS water-repellent, stain-resistant finish and a 5-year Sunbrella warranty. We make every cushion to order, any shape, with Dry Fast foam available for wet areas and a zippered cover.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing your foam (3-year foam warranty)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Density:\u003c\/strong\u003e a medium feel for everyday seats, chairs and mattresses. 1.8 lb\/ft³ density, 35 lb ILD, lasts about 7 years. For thin dining seats (1″–2″), Luxury foam holds up better.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLuxury:\u003c\/strong\u003e firm, and firmer as it gets thicker (7″–8″ feels very firm unless you weigh over 200 lb). 1.8 lb\/ft³, 50 lb ILD, lasts about 5–8 years. A good pick for dining seats from 1″ to 3″.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Fast:\u003c\/strong\u003e open-cell outdoor foam that lets water drain straight through, for patio, pool and boat cushions. Firm, 1.8 lb\/ft³, 60 lb ILD, lasts about 5–8 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Soft:\u003c\/strong\u003e for sofa back cushions and mattress toppers only, not seats. 1.2 lb\/ft³, 12 lb ILD, lasts about 5 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDacron wrap (optional):\u003c\/strong\u003e a 1″ layer of polyester fiberfill around the foam that rounds the edges and fills the cover. We attach it with fine staples that won't tear the foam or the cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber fill:\u003c\/strong\u003e loose 100% polyester filling for back cushions you want to sink into. Not for seats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEntering your size\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnter every measurement in inches.\u003c\/li\u003e\n\u003cli\u003eSizes between quarter inches are rounded up to the next ¼″.\u003c\/li\u003e\n\u003cli\u003eGive us the finished cushion size. If you add a Dacron wrap, don't make the numbers smaller; we allow for the wrap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePiping and ties\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePiping is a fabric-covered cord sewn into the edge seams. It gives the cushion a neat, defined edge and helps it keep its shape. Ties hold the cushion to the chair frame so it doesn't slide. If you need ties somewhere the options don't cover, \u003ca href=\"mailto:care@fabricakraft.com\"\u003eemail us\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThick cushions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe cut foam up to 6″ thick from one solid piece. From over 6″ to 8″, we glue two layers of the same foam together at no extra charge. For anything over 8″, or to mix two foam types in one cushion, \u003ca href=\"\/en-ca\/pages\/contact\"\u003econtact us\u003c\/a\u003e for a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturing Tolerances\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor custom orders, we cut to within ±0.5″ of your measurements.\u003c\/p\u003e\n","brand":"Sunbrella","offers":[{"title":"Default Title","offer_id":67890872647915,"sku":"FLA-J704-140","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/9018\/5451\/files\/fla_j704_flavour_aquatic_680x480_rvb_138265.webp?v=1791315971"},{"product_id":"sunbrella-aroma-tuberose-cushion","title":"Sunbrella Aroma Tuberose Custom Outdoor Cushion","description":"\u003cp\u003e\u003cstrong\u003eSunbrella Aroma Tuberose\u003c\/strong\u003e is part of Sunbrella's new Vision collection: an artisanal stripe made with the thickest yarn in the collection, with a 25.7 cm (about 10″) repeat. Tuberose is a soft natural stripe in cream and taupe with fine black accents. It is neutral with a crafted, designer feel. Made from 100% Sunbrella acrylic (530 g\/m²), it has a non-PFAS water-repellent, stain-resistant finish and a 5-year Sunbrella warranty. We make every cushion to order, any shape, with Dry Fast foam available for wet areas and a zippered cover.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing your foam (3-year foam warranty)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Density:\u003c\/strong\u003e a medium feel for everyday seats, chairs and mattresses. 1.8 lb\/ft³ density, 35 lb ILD, lasts about 7 years. For thin dining seats (1″–2″), Luxury foam holds up better.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLuxury:\u003c\/strong\u003e firm, and firmer as it gets thicker (7″–8″ feels very firm unless you weigh over 200 lb). 1.8 lb\/ft³, 50 lb ILD, lasts about 5–8 years. A good pick for dining seats from 1″ to 3″.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Fast:\u003c\/strong\u003e open-cell outdoor foam that lets water drain straight through, for patio, pool and boat cushions. Firm, 1.8 lb\/ft³, 60 lb ILD, lasts about 5–8 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Soft:\u003c\/strong\u003e for sofa back cushions and mattress toppers only, not seats. 1.2 lb\/ft³, 12 lb ILD, lasts about 5 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDacron wrap (optional):\u003c\/strong\u003e a 1″ layer of polyester fiberfill around the foam that rounds the edges and fills the cover. We attach it with fine staples that won't tear the foam or the cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber fill:\u003c\/strong\u003e loose 100% polyester filling for back cushions you want to sink into. Not for seats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEntering your size\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnter every measurement in inches.\u003c\/li\u003e\n\u003cli\u003eSizes between quarter inches are rounded up to the next ¼″.\u003c\/li\u003e\n\u003cli\u003eGive us the finished cushion size. If you add a Dacron wrap, don't make the numbers smaller; we allow for the wrap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePiping and ties\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePiping is a fabric-covered cord sewn into the edge seams. It gives the cushion a neat, defined edge and helps it keep its shape. Ties hold the cushion to the chair frame so it doesn't slide. If you need ties somewhere the options don't cover, \u003ca href=\"mailto:care@fabricakraft.com\"\u003eemail us\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThick cushions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe cut foam up to 6″ thick from one solid piece. From over 6″ to 8″, we glue two layers of the same foam together at no extra charge. For anything over 8″, or to mix two foam types in one cushion, \u003ca href=\"\/en-ca\/pages\/contact\"\u003econtact us\u003c\/a\u003e for a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturing Tolerances\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor custom orders, we cut to within ±0.5″ of your measurements.\u003c\/p\u003e\n","brand":"Sunbrella","offers":[{"title":"Default Title","offer_id":67890872713451,"sku":"ARO-J706-140","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/9018\/5451\/files\/aro_j706_aroma_tuberose_680x480_laize_rvb_98341.webp?v=1791315973"},{"product_id":"sunbrella-aroma-nutmeg-cushion","title":"Sunbrella Aroma Nutmeg Custom Outdoor Cushion","description":"\u003cp\u003e\u003cstrong\u003eSunbrella Aroma Nutmeg\u003c\/strong\u003e is part of Sunbrella's new Vision collection: an artisanal stripe made with the thickest yarn in the collection, with a 25.7 cm (about 10″) repeat. Nutmeg is a warm brown stripe with cream and black details. It pairs well with dark wood and leather-look accents. Made from 100% Sunbrella acrylic (530 g\/m²), it has a non-PFAS water-repellent, stain-resistant finish and a 5-year Sunbrella warranty. We make every cushion to order, any shape, with Dry Fast foam available for wet areas and a zippered cover.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing your foam (3-year foam warranty)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Density:\u003c\/strong\u003e a medium feel for everyday seats, chairs and mattresses. 1.8 lb\/ft³ density, 35 lb ILD, lasts about 7 years. For thin dining seats (1″–2″), Luxury foam holds up better.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLuxury:\u003c\/strong\u003e firm, and firmer as it gets thicker (7″–8″ feels very firm unless you weigh over 200 lb). 1.8 lb\/ft³, 50 lb ILD, lasts about 5–8 years. A good pick for dining seats from 1″ to 3″.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Fast:\u003c\/strong\u003e open-cell outdoor foam that lets water drain straight through, for patio, pool and boat cushions. Firm, 1.8 lb\/ft³, 60 lb ILD, lasts about 5–8 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Soft:\u003c\/strong\u003e for sofa back cushions and mattress toppers only, not seats. 1.2 lb\/ft³, 12 lb ILD, lasts about 5 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDacron wrap (optional):\u003c\/strong\u003e a 1″ layer of polyester fiberfill around the foam that rounds the edges and fills the cover. We attach it with fine staples that won't tear the foam or the cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber fill:\u003c\/strong\u003e loose 100% polyester filling for back cushions you want to sink into. Not for seats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEntering your size\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnter every measurement in inches.\u003c\/li\u003e\n\u003cli\u003eSizes between quarter inches are rounded up to the next ¼″.\u003c\/li\u003e\n\u003cli\u003eGive us the finished cushion size. If you add a Dacron wrap, don't make the numbers smaller; we allow for the wrap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePiping and ties\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePiping is a fabric-covered cord sewn into the edge seams. It gives the cushion a neat, defined edge and helps it keep its shape. Ties hold the cushion to the chair frame so it doesn't slide. If you need ties somewhere the options don't cover, \u003ca href=\"mailto:care@fabricakraft.com\"\u003eemail us\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThick cushions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe cut foam up to 6″ thick from one solid piece. From over 6″ to 8″, we glue two layers of the same foam together at no extra charge. For anything over 8″, or to mix two foam types in one cushion, \u003ca href=\"\/en-ca\/pages\/contact\"\u003econtact us\u003c\/a\u003e for a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturing Tolerances\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor custom orders, we cut to within ±0.5″ of your measurements.\u003c\/p\u003e\n","brand":"Sunbrella","offers":[{"title":"Default Title","offer_id":67890872778987,"sku":"ARO-J707-140","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/9018\/5451\/files\/aro_j707_aroma_nutmeg_680x480_laize_rvb_113372.webp?v=1791315974"},{"product_id":"sunbrella-aroma-nigella-cushion","title":"Sunbrella Aroma Nigella Custom Outdoor Cushion","description":"\u003cp\u003e\u003cstrong\u003eSunbrella Aroma Nigella\u003c\/strong\u003e is part of Sunbrella's new Vision collection: an artisanal stripe made with the thickest yarn in the collection, with a 25.7 cm (about 10″) repeat. Nigella sets bright blue stripes on a natural cream base. It brings a fresh, coastal energy to any seat. Made from 100% Sunbrella acrylic (530 g\/m²), it has a non-PFAS water-repellent, stain-resistant finish and a 5-year Sunbrella warranty. We make every cushion to order, any shape, with Dry Fast foam available for wet areas and a zippered cover.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing your foam (3-year foam warranty)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Density:\u003c\/strong\u003e a medium feel for everyday seats, chairs and mattresses. 1.8 lb\/ft³ density, 35 lb ILD, lasts about 7 years. For thin dining seats (1″–2″), Luxury foam holds up better.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLuxury:\u003c\/strong\u003e firm, and firmer as it gets thicker (7″–8″ feels very firm unless you weigh over 200 lb). 1.8 lb\/ft³, 50 lb ILD, lasts about 5–8 years. A good pick for dining seats from 1″ to 3″.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Fast:\u003c\/strong\u003e open-cell outdoor foam that lets water drain straight through, for patio, pool and boat cushions. Firm, 1.8 lb\/ft³, 60 lb ILD, lasts about 5–8 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Soft:\u003c\/strong\u003e for sofa back cushions and mattress toppers only, not seats. 1.2 lb\/ft³, 12 lb ILD, lasts about 5 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDacron wrap (optional):\u003c\/strong\u003e a 1″ layer of polyester fiberfill around the foam that rounds the edges and fills the cover. We attach it with fine staples that won't tear the foam or the cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber fill:\u003c\/strong\u003e loose 100% polyester filling for back cushions you want to sink into. Not for seats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEntering your size\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnter every measurement in inches.\u003c\/li\u003e\n\u003cli\u003eSizes between quarter inches are rounded up to the next ¼″.\u003c\/li\u003e\n\u003cli\u003eGive us the finished cushion size. If you add a Dacron wrap, don't make the numbers smaller; we allow for the wrap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePiping and ties\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePiping is a fabric-covered cord sewn into the edge seams. It gives the cushion a neat, defined edge and helps it keep its shape. Ties hold the cushion to the chair frame so it doesn't slide. If you need ties somewhere the options don't cover, \u003ca href=\"mailto:care@fabricakraft.com\"\u003eemail us\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThick cushions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe cut foam up to 6″ thick from one solid piece. From over 6″ to 8″, we glue two layers of the same foam together at no extra charge. For anything over 8″, or to mix two foam types in one cushion, \u003ca href=\"\/en-ca\/pages\/contact\"\u003econtact us\u003c\/a\u003e for a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturing Tolerances\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor custom orders, we cut to within ±0.5″ of your measurements.\u003c\/p\u003e\n","brand":"Sunbrella","offers":[{"title":"Default Title","offer_id":67890872811755,"sku":"ARO-J709-140","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/9018\/5451\/files\/aro_j709_aroma_nigella_680x480_laize_rvb_100928.webp?v=1791315975"},{"product_id":"sunbrella-aroma-clove-cushion","title":"Sunbrella Aroma Clove Custom Outdoor Cushion","description":"\u003cp\u003e\u003cstrong\u003eSunbrella Aroma Clove\u003c\/strong\u003e is part of Sunbrella's new Vision collection: an artisanal stripe made with the thickest yarn in the collection, with a 25.7 cm (about 10″) repeat. Clove is a rust-orange stripe with cream and black accents. It feels warm and earthy next to terracotta and olive greens. Made from 100% Sunbrella acrylic (530 g\/m²), it has a non-PFAS water-repellent, stain-resistant finish and a 5-year Sunbrella warranty. We make every cushion to order, any shape, with Dry Fast foam available for wet areas and a zippered cover.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing your foam (3-year foam warranty)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Density:\u003c\/strong\u003e a medium feel for everyday seats, chairs and mattresses. 1.8 lb\/ft³ density, 35 lb ILD, lasts about 7 years. For thin dining seats (1″–2″), Luxury foam holds up better.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLuxury:\u003c\/strong\u003e firm, and firmer as it gets thicker (7″–8″ feels very firm unless you weigh over 200 lb). 1.8 lb\/ft³, 50 lb ILD, lasts about 5–8 years. A good pick for dining seats from 1″ to 3″.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Fast:\u003c\/strong\u003e open-cell outdoor foam that lets water drain straight through, for patio, pool and boat cushions. Firm, 1.8 lb\/ft³, 60 lb ILD, lasts about 5–8 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Soft:\u003c\/strong\u003e for sofa back cushions and mattress toppers only, not seats. 1.2 lb\/ft³, 12 lb ILD, lasts about 5 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDacron wrap (optional):\u003c\/strong\u003e a 1″ layer of polyester fiberfill around the foam that rounds the edges and fills the cover. We attach it with fine staples that won't tear the foam or the cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber fill:\u003c\/strong\u003e loose 100% polyester filling for back cushions you want to sink into. Not for seats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEntering your size\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnter every measurement in inches.\u003c\/li\u003e\n\u003cli\u003eSizes between quarter inches are rounded up to the next ¼″.\u003c\/li\u003e\n\u003cli\u003eGive us the finished cushion size. If you add a Dacron wrap, don't make the numbers smaller; we allow for the wrap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePiping and ties\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePiping is a fabric-covered cord sewn into the edge seams. It gives the cushion a neat, defined edge and helps it keep its shape. Ties hold the cushion to the chair frame so it doesn't slide. If you need ties somewhere the options don't cover, \u003ca href=\"mailto:care@fabricakraft.com\"\u003eemail us\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThick cushions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe cut foam up to 6″ thick from one solid piece. From over 6″ to 8″, we glue two layers of the same foam together at no extra charge. For anything over 8″, or to mix two foam types in one cushion, \u003ca href=\"\/en-ca\/pages\/contact\"\u003econtact us\u003c\/a\u003e for a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturing Tolerances\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor custom orders, we cut to within ±0.5″ of your measurements.\u003c\/p\u003e\n","brand":"Sunbrella","offers":[{"title":"Default Title","offer_id":67890872877291,"sku":"ARO-J708-140","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/9018\/5451\/files\/aro_j708_aroma_clove_680x480_laize_rvb_143943.webp?v=1791315976"},{"product_id":"sunbrella-aroma-bergamot-cushion","title":"Sunbrella Aroma Bergamot Custom Outdoor Cushion","description":"\u003cp\u003e\u003cstrong\u003eSunbrella Aroma Bergamot\u003c\/strong\u003e is part of Sunbrella's new Vision collection: an artisanal stripe made with the thickest yarn in the collection, with a 25.7 cm (about 10″) repeat. Bergamot pairs green stripes with a natural cream base. It looks at home in gardens and on painted wood furniture. Made from 100% Sunbrella acrylic (530 g\/m²), it has a non-PFAS water-repellent, stain-resistant finish and a 5-year Sunbrella warranty. We make every cushion to order, any shape, with Dry Fast foam available for wet areas and a zippered cover.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing your foam (3-year foam warranty)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Density:\u003c\/strong\u003e a medium feel for everyday seats, chairs and mattresses. 1.8 lb\/ft³ density, 35 lb ILD, lasts about 7 years. For thin dining seats (1″–2″), Luxury foam holds up better.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLuxury:\u003c\/strong\u003e firm, and firmer as it gets thicker (7″–8″ feels very firm unless you weigh over 200 lb). 1.8 lb\/ft³, 50 lb ILD, lasts about 5–8 years. A good pick for dining seats from 1″ to 3″.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Fast:\u003c\/strong\u003e open-cell outdoor foam that lets water drain straight through, for patio, pool and boat cushions. Firm, 1.8 lb\/ft³, 60 lb ILD, lasts about 5–8 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Soft:\u003c\/strong\u003e for sofa back cushions and mattress toppers only, not seats. 1.2 lb\/ft³, 12 lb ILD, lasts about 5 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDacron wrap (optional):\u003c\/strong\u003e a 1″ layer of polyester fiberfill around the foam that rounds the edges and fills the cover. We attach it with fine staples that won't tear the foam or the cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber fill:\u003c\/strong\u003e loose 100% polyester filling for back cushions you want to sink into. Not for seats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEntering your size\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnter every measurement in inches.\u003c\/li\u003e\n\u003cli\u003eSizes between quarter inches are rounded up to the next ¼″.\u003c\/li\u003e\n\u003cli\u003eGive us the finished cushion size. If you add a Dacron wrap, don't make the numbers smaller; we allow for the wrap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePiping and ties\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePiping is a fabric-covered cord sewn into the edge seams. It gives the cushion a neat, defined edge and helps it keep its shape. Ties hold the cushion to the chair frame so it doesn't slide. If you need ties somewhere the options don't cover, \u003ca href=\"mailto:care@fabricakraft.com\"\u003eemail us\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThick cushions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe cut foam up to 6″ thick from one solid piece. From over 6″ to 8″, we glue two layers of the same foam together at no extra charge. For anything over 8″, or to mix two foam types in one cushion, \u003ca href=\"\/en-ca\/pages\/contact\"\u003econtact us\u003c\/a\u003e for a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturing Tolerances\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor custom orders, we cut to within ±0.5″ of your measurements.\u003c\/p\u003e\n","brand":"Sunbrella","offers":[{"title":"Default Title","offer_id":67890872910059,"sku":"ARO-J710-140","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/9018\/5451\/files\/aro_j710_aroma_bergamot_680x480_laize_rvb_106680.webp?v=1791315978"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/9018\/5451\/collections\/aro_j710_aroma_bergamot_680x480_laize_rvb_106680.jpg?v=1792349598","url":"https:\/\/www.fabricakraft.com\/en-ca\/collections\/sunbrella-vision-collection.oembed","provider":"Fabrica Kraft ","version":"1.0","type":"link"}