{"title":"Sunbrella Natte Collection","description":"\u003cp\u003eThe Sunbrella Natte collection at Fabrica Kraft has 11 fabrics, including Amber, Carmine, Flamingo and Cadet Grey. Sunbrella is solution-dyed acrylic, so the color runs through the fiber and holds up to sun, rain and mildew. Pick any color and build a cushion, pillow or curtain to your exact size.\u003c\/p\u003e\u003cp\u003eNatte is Sunbrella's basket-weave texture: a fine, woven pattern that gives solid colors more depth. Use Eclipse or Oyster for a set of outdoor dining chairs or accent seats on a neutral sectional. Each cushion is cut within ±0.5″ of your size, with ties in matching fabric, and most ship in 2–3 weeks.\u003c\/p\u003e\u003cp\u003eBuild your cushions in the \u003ca href=\"\/en-ca\/products\/replacement-outdoor-chair-cushions-sunbrella\"\u003eoutdoor chair cushion builder\u003c\/a\u003e or the \u003ca href=\"\/en-ca\/products\/custom-chaise-lounge-cushion-sunbrella\"\u003echaise lounge cushion builder\u003c\/a\u003e, see all \u003ca href=\"\/en-ca\/collections\/sunbrella-cushions\"\u003eSunbrella cushions\u003c\/a\u003e, or \u003ca href=\"\/en-ca\/pages\/fabric-swatches\"\u003eorder swatches\u003c\/a\u003e to compare Sunbrella Natte colors at home.\u003c\/p\u003e\u003ch2\u003eQuestions about Sunbrella Natte\u003c\/h2\u003e\u003ch3\u003eCan Sunbrella Natte cushions stay outside in the rain?\u003c\/h3\u003e\u003cp\u003eYes. Sunbrella Natte is water- and stain-repellent and made for sun, rain and mildew, though it is not waterproof. For cushions left out in heavy rain, add Dry Fast foam, or see our Sunbrella waterproof range.\u003c\/p\u003e\u003ch3\u003eWhat warranty comes with Sunbrella Natte?\u003c\/h3\u003e\u003cp\u003eSunbrella Natte carries Sunbrella's 5-year fabric warranty, and our own workmanship on Natte cushions is covered for 2 years.\u003c\/p\u003e\u003ch3\u003eHow do I clean Sunbrella Natte cushions?\u003c\/h3\u003e\u003cp\u003eSweep off dirt and leaves, then sponge any spots on Sunbrella Natte with mild soapy water and rinse. The covers come off with a zipper and are machine washable; air-dry them fully.\u003c\/p\u003e","products":[{"product_id":"sunbrella-natee-amber-cushion","title":"Sunbrella Natte Amber Custom Outdoor Cushion","description":"\u003cp\u003eGolden and warm, \u003cstrong\u003eSunbrella Natte Amber\u003c\/strong\u003e brings a sunny yellow to outdoor seating. It pairs well with gray stone, navy accents, and dark teak. Use it for a bench cushion on a bright deck, a set of outdoor dining chair cushions, or accent seats on a neutral sectional. A single amber cushion can lift a plain patio set. The color is solution-dyed, so it resists fading, and the fabric resists mildew and cleans easily. Tell us the measurements and foam you want, and in-stock fabric ships in about two weeks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing your foam (3-year foam warranty)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Density:\u003c\/strong\u003e a medium feel for everyday seats, chairs and mattresses. 1.8 lb\/ft³ density, 35 lb ILD, lasts about 7 years. For thin dining seats (1″–2″), Luxury foam holds up better.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLuxury:\u003c\/strong\u003e firm, and firmer as it gets thicker (7″–8″ feels very firm unless you weigh over 200 lb). 1.8 lb\/ft³, 50 lb ILD, lasts about 5–8 years. A good pick for dining seats from 1″ to 3″.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Fast:\u003c\/strong\u003e open-cell outdoor foam that lets water drain straight through, for patio, pool and boat cushions. Firm, 1.8 lb\/ft³, 60 lb ILD, lasts about 5–8 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Soft:\u003c\/strong\u003e for sofa back cushions and mattress toppers only, not seats. 1.2 lb\/ft³, 12 lb ILD, lasts about 5 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDacron wrap (optional):\u003c\/strong\u003e a 1″ layer of polyester fiberfill around the foam that rounds the edges and fills the cover. We attach it with fine staples that won't tear the foam or the cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber fill:\u003c\/strong\u003e loose 100% polyester filling for back cushions you want to sink into. Not for seats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEntering your size\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnter every measurement in inches.\u003c\/li\u003e\n\u003cli\u003eSizes between quarter inches are rounded up to the next ¼″.\u003c\/li\u003e\n\u003cli\u003eGive us the finished cushion size. If you add a Dacron wrap, don't make the numbers smaller; we allow for the wrap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePiping and ties\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePiping is a fabric-covered cord sewn into the edge seams. It gives the cushion a neat, defined edge and helps it keep its shape. Ties hold the cushion to the chair frame so it doesn't slide. If you need ties somewhere the options don't cover, \u003ca href=\"mailto:care@fabricakraft.com\"\u003eemail us\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThick cushions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe cut foam up to 6″ thick from one solid piece. From over 6″ to 8″, we glue two layers of the same foam together at no extra charge. For anything over 8″, or to mix two foam types in one cushion, \u003ca href=\"\/en-ca\/pages\/contact\"\u003econtact us\u003c\/a\u003e for a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturing Tolerances\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor custom orders, we cut to within ±0.5″ of your measurements.\u003c\/p\u003e","brand":"Sunbrella","offers":[{"title":"Default Title","offer_id":44420805034219,"sku":"NAT-10235-140","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/9018\/5451\/files\/Sunbrella-Natee-Amber-Cushion.png?v=1702681428"},{"product_id":"sunbrella-natee-carmine-cushion","title":"Sunbrella Natte Carmine Custom Outdoor Cushion","description":"\u003cp\u003eBold carmine red gives \u003cstrong\u003eSunbrella Natte Carmine\u003c\/strong\u003e a strong, classic presence. It pairs with charcoal, crisp white, and black iron. Use it for a pair of lounge chairs, festive porch seating, or round seat pads for outdoor bar stools. A few red cushions can bring a neutral patio to life. Red can be quick to fade, but solution-dyed Sunbrella keeps its color in the sun and resists mildew. Round pads are no problem, since we make cushions as rectangles, trapezoids, rounds, and L-shapes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing your foam (3-year foam warranty)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Density:\u003c\/strong\u003e a medium feel for everyday seats, chairs and mattresses. 1.8 lb\/ft³ density, 35 lb ILD, lasts about 7 years. For thin dining seats (1″–2″), Luxury foam holds up better.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLuxury:\u003c\/strong\u003e firm, and firmer as it gets thicker (7″–8″ feels very firm unless you weigh over 200 lb). 1.8 lb\/ft³, 50 lb ILD, lasts about 5–8 years. A good pick for dining seats from 1″ to 3″.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Fast:\u003c\/strong\u003e open-cell outdoor foam that lets water drain straight through, for patio, pool and boat cushions. Firm, 1.8 lb\/ft³, 60 lb ILD, lasts about 5–8 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Soft:\u003c\/strong\u003e for sofa back cushions and mattress toppers only, not seats. 1.2 lb\/ft³, 12 lb ILD, lasts about 5 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDacron wrap (optional):\u003c\/strong\u003e a 1″ layer of polyester fiberfill around the foam that rounds the edges and fills the cover. We attach it with fine staples that won't tear the foam or the cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber fill:\u003c\/strong\u003e loose 100% polyester filling for back cushions you want to sink into. Not for seats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEntering your size\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnter every measurement in inches.\u003c\/li\u003e\n\u003cli\u003eSizes between quarter inches are rounded up to the next ¼″.\u003c\/li\u003e\n\u003cli\u003eGive us the finished cushion size. If you add a Dacron wrap, don't make the numbers smaller; we allow for the wrap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePiping and ties\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePiping is a fabric-covered cord sewn into the edge seams. It gives the cushion a neat, defined edge and helps it keep its shape. Ties hold the cushion to the chair frame so it doesn't slide. If you need ties somewhere the options don't cover, \u003ca href=\"mailto:care@fabricakraft.com\"\u003eemail us\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThick cushions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe cut foam up to 6″ thick from one solid piece. From over 6″ to 8″, we glue two layers of the same foam together at no extra charge. For anything over 8″, or to mix two foam types in one cushion, \u003ca href=\"\/en-ca\/pages\/contact\"\u003econtact us\u003c\/a\u003e for a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturing Tolerances\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor custom orders, we cut to within ±0.5″ of your measurements.\u003c\/p\u003e","brand":"Sunbrella","offers":[{"title":"Default Title","offer_id":44420813619435,"sku":"NAT-10231-140","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/9018\/5451\/files\/Sunbrella-Natee-Carmine-Cushion.png?v=1702681455"},{"product_id":"sunbrella-natee-flamingo-cushion","title":"Sunbrella Natte Flamingo Custom Outdoor Cushion","description":"\u003cp\u003ePlayful and fun, \u003cstrong\u003eSunbrella Natte Flamingo\u003c\/strong\u003e is a flamingo pink that brings a retro, resort feel. It pairs with white furniture, palm green, and light wood. Use it on a pool chaise, a hanging egg chair, or a reading nook in a sunroom. It is a great way to add a little personality to a simple patio. The solution-dyed fabric holds its color and resists mildew, and it cleans up easily. There is no minimum, so a single egg chair cushion made to your measurements is a perfectly good order.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing your foam (3-year foam warranty)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Density:\u003c\/strong\u003e a medium feel for everyday seats, chairs and mattresses. 1.8 lb\/ft³ density, 35 lb ILD, lasts about 7 years. For thin dining seats (1″–2″), Luxury foam holds up better.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLuxury:\u003c\/strong\u003e firm, and firmer as it gets thicker (7″–8″ feels very firm unless you weigh over 200 lb). 1.8 lb\/ft³, 50 lb ILD, lasts about 5–8 years. A good pick for dining seats from 1″ to 3″.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Fast:\u003c\/strong\u003e open-cell outdoor foam that lets water drain straight through, for patio, pool and boat cushions. Firm, 1.8 lb\/ft³, 60 lb ILD, lasts about 5–8 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Soft:\u003c\/strong\u003e for sofa back cushions and mattress toppers only, not seats. 1.2 lb\/ft³, 12 lb ILD, lasts about 5 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDacron wrap (optional):\u003c\/strong\u003e a 1″ layer of polyester fiberfill around the foam that rounds the edges and fills the cover. We attach it with fine staples that won't tear the foam or the cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber fill:\u003c\/strong\u003e loose 100% polyester filling for back cushions you want to sink into. Not for seats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEntering your size\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnter every measurement in inches.\u003c\/li\u003e\n\u003cli\u003eSizes between quarter inches are rounded up to the next ¼″.\u003c\/li\u003e\n\u003cli\u003eGive us the finished cushion size. If you add a Dacron wrap, don't make the numbers smaller; we allow for the wrap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePiping and ties\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePiping is a fabric-covered cord sewn into the edge seams. It gives the cushion a neat, defined edge and helps it keep its shape. Ties hold the cushion to the chair frame so it doesn't slide. If you need ties somewhere the options don't cover, \u003ca href=\"mailto:care@fabricakraft.com\"\u003eemail us\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThick cushions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe cut foam up to 6″ thick from one solid piece. From over 6″ to 8″, we glue two layers of the same foam together at no extra charge. For anything over 8″, or to mix two foam types in one cushion, \u003ca href=\"\/en-ca\/pages\/contact\"\u003econtact us\u003c\/a\u003e for a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturing Tolerances\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor custom orders, we cut to within ±0.5″ of your measurements.\u003c\/p\u003e","brand":"Sunbrella","offers":[{"title":"Default Title","offer_id":44420823417067,"sku":"NAT-10234-140","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/9018\/5451\/files\/Sunbrella-Natee-Flamingo-Cushion-7.png?v=1702681539"},{"product_id":"sunbrella-natte-cadet-grey-cushion","title":"Sunbrella Natte Cadet Grey Custom Outdoor Cushion","description":"\u003cp\u003e\u003cstrong\u003eSunbrella Natte Cadet Grey\u003c\/strong\u003e is a natté (basket-weave) fabric with a subtle, tactile texture. This mid-tone gray is a practical, modern neutral that works with black, white or natural wood frames. Like all Sunbrella fabrics it is solution-dyed, so it resists fading, mildew and stains, cleans easily and carries Sunbrella's 5-year warranty. We make every cushion to order, any shape, with Dry Fast foam available for wet areas and a zippered cover.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing your foam (3-year foam warranty)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Density:\u003c\/strong\u003e a medium feel for everyday seats, chairs and mattresses. 1.8 lb\/ft³ density, 35 lb ILD, lasts about 7 years. For thin dining seats (1″–2″), Luxury foam holds up better.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLuxury:\u003c\/strong\u003e firm, and firmer as it gets thicker (7″–8″ feels very firm unless you weigh over 200 lb). 1.8 lb\/ft³, 50 lb ILD, lasts about 5–8 years. A good pick for dining seats from 1″ to 3″.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Fast:\u003c\/strong\u003e open-cell outdoor foam that lets water drain straight through, for patio, pool and boat cushions. Firm, 1.8 lb\/ft³, 60 lb ILD, lasts about 5–8 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Soft:\u003c\/strong\u003e for sofa back cushions and mattress toppers only, not seats. 1.2 lb\/ft³, 12 lb ILD, lasts about 5 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDacron wrap (optional):\u003c\/strong\u003e a 1″ layer of polyester fiberfill around the foam that rounds the edges and fills the cover. We attach it with fine staples that won't tear the foam or the cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber fill:\u003c\/strong\u003e loose 100% polyester filling for back cushions you want to sink into. Not for seats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEntering your size\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnter every measurement in inches.\u003c\/li\u003e\n\u003cli\u003eSizes between quarter inches are rounded up to the next ¼″.\u003c\/li\u003e\n\u003cli\u003eGive us the finished cushion size. If you add a Dacron wrap, don't make the numbers smaller; we allow for the wrap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePiping and ties\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePiping is a fabric-covered cord sewn into the edge seams. It gives the cushion a neat, defined edge and helps it keep its shape. Ties hold the cushion to the chair frame so it doesn't slide. If you need ties somewhere the options don't cover, \u003ca href=\"mailto:care@fabricakraft.com\"\u003eemail us\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThick cushions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe cut foam up to 6″ thick from one solid piece. From over 6″ to 8″, we glue two layers of the same foam together at no extra charge. For anything over 8″, or to mix two foam types in one cushion, \u003ca href=\"\/en-ca\/pages\/contact\"\u003econtact us\u003c\/a\u003e for a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturing Tolerances\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor custom orders, we cut to within ±0.5″ of your measurements.\u003c\/p\u003e\n","brand":"Sunbrella","offers":[{"title":"Default Title","offer_id":67892865335531,"sku":"NAT-5073-140","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/9018\/5451\/files\/sunbrella-natte-cadet-grey-cushion.webp?v=1791319864"},{"product_id":"sunbrella-natte-clay-cushion","title":"Sunbrella Natte Clay Custom Outdoor Cushion","description":"\u003cp\u003e\u003cstrong\u003eSunbrella Natte Clay\u003c\/strong\u003e is a natté (basket-weave) fabric with a subtle, tactile texture. This light gray is a practical, modern neutral that works with black, white or natural wood frames. Like all Sunbrella fabrics it is solution-dyed, so it resists fading, mildew and stains, cleans easily and carries Sunbrella's 5-year warranty. We make every cushion to order, any shape, with Dry Fast foam available for wet areas and a zippered cover.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing your foam (3-year foam warranty)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Density:\u003c\/strong\u003e a medium feel for everyday seats, chairs and mattresses. 1.8 lb\/ft³ density, 35 lb ILD, lasts about 7 years. For thin dining seats (1″–2″), Luxury foam holds up better.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLuxury:\u003c\/strong\u003e firm, and firmer as it gets thicker (7″–8″ feels very firm unless you weigh over 200 lb). 1.8 lb\/ft³, 50 lb ILD, lasts about 5–8 years. A good pick for dining seats from 1″ to 3″.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Fast:\u003c\/strong\u003e open-cell outdoor foam that lets water drain straight through, for patio, pool and boat cushions. Firm, 1.8 lb\/ft³, 60 lb ILD, lasts about 5–8 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Soft:\u003c\/strong\u003e for sofa back cushions and mattress toppers only, not seats. 1.2 lb\/ft³, 12 lb ILD, lasts about 5 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDacron wrap (optional):\u003c\/strong\u003e a 1″ layer of polyester fiberfill around the foam that rounds the edges and fills the cover. We attach it with fine staples that won't tear the foam or the cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber fill:\u003c\/strong\u003e loose 100% polyester filling for back cushions you want to sink into. Not for seats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEntering your size\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnter every measurement in inches.\u003c\/li\u003e\n\u003cli\u003eSizes between quarter inches are rounded up to the next ¼″.\u003c\/li\u003e\n\u003cli\u003eGive us the finished cushion size. If you add a Dacron wrap, don't make the numbers smaller; we allow for the wrap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePiping and ties\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePiping is a fabric-covered cord sewn into the edge seams. It gives the cushion a neat, defined edge and helps it keep its shape. Ties hold the cushion to the chair frame so it doesn't slide. If you need ties somewhere the options don't cover, \u003ca href=\"mailto:care@fabricakraft.com\"\u003eemail us\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThick cushions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe cut foam up to 6″ thick from one solid piece. From over 6″ to 8″, we glue two layers of the same foam together at no extra charge. For anything over 8″, or to mix two foam types in one cushion, \u003ca href=\"\/en-ca\/pages\/contact\"\u003econtact us\u003c\/a\u003e for a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturing Tolerances\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor custom orders, we cut to within ±0.5″ of your measurements.\u003c\/p\u003e\n","brand":"Sunbrella","offers":[{"title":"Default Title","offer_id":67892871528683,"sku":"NAT-P048-140","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/9018\/5451\/files\/sunbrella-natte-clay-cushion.webp?v=1791319865"},{"product_id":"sunbrella-natte-dragonfly-cushion","title":"Sunbrella Natte Dragonfly Custom Outdoor Cushion","description":"\u003cp\u003e\u003cstrong\u003eSunbrella Natte Dragonfly\u003c\/strong\u003e is a natté (basket-weave) fabric with a subtle, tactile texture. This deep blue has a relaxed, coastal feel on boats, poolside loungers and porch seating. Like all Sunbrella fabrics it is solution-dyed, so it resists fading, mildew and stains, cleans easily and carries Sunbrella's 5-year warranty. We make every cushion to order, any shape, with Dry Fast foam available for wet areas and a zippered cover.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing your foam (3-year foam warranty)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Density:\u003c\/strong\u003e a medium feel for everyday seats, chairs and mattresses. 1.8 lb\/ft³ density, 35 lb ILD, lasts about 7 years. For thin dining seats (1″–2″), Luxury foam holds up better.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLuxury:\u003c\/strong\u003e firm, and firmer as it gets thicker (7″–8″ feels very firm unless you weigh over 200 lb). 1.8 lb\/ft³, 50 lb ILD, lasts about 5–8 years. A good pick for dining seats from 1″ to 3″.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Fast:\u003c\/strong\u003e open-cell outdoor foam that lets water drain straight through, for patio, pool and boat cushions. Firm, 1.8 lb\/ft³, 60 lb ILD, lasts about 5–8 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Soft:\u003c\/strong\u003e for sofa back cushions and mattress toppers only, not seats. 1.2 lb\/ft³, 12 lb ILD, lasts about 5 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDacron wrap (optional):\u003c\/strong\u003e a 1″ layer of polyester fiberfill around the foam that rounds the edges and fills the cover. We attach it with fine staples that won't tear the foam or the cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber fill:\u003c\/strong\u003e loose 100% polyester filling for back cushions you want to sink into. Not for seats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEntering your size\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnter every measurement in inches.\u003c\/li\u003e\n\u003cli\u003eSizes between quarter inches are rounded up to the next ¼″.\u003c\/li\u003e\n\u003cli\u003eGive us the finished cushion size. If you add a Dacron wrap, don't make the numbers smaller; we allow for the wrap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePiping and ties\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePiping is a fabric-covered cord sewn into the edge seams. It gives the cushion a neat, defined edge and helps it keep its shape. Ties hold the cushion to the chair frame so it doesn't slide. If you need ties somewhere the options don't cover, \u003ca href=\"mailto:care@fabricakraft.com\"\u003eemail us\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThick cushions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe cut foam up to 6″ thick from one solid piece. From over 6″ to 8″, we glue two layers of the same foam together at no extra charge. For anything over 8″, or to mix two foam types in one cushion, \u003ca href=\"\/en-ca\/pages\/contact\"\u003econtact us\u003c\/a\u003e for a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturing Tolerances\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor custom orders, we cut to within ±0.5″ of your measurements.\u003c\/p\u003e\n","brand":"Sunbrella","offers":[{"title":"Default Title","offer_id":67892871594219,"sku":"NAT-P095-140","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/9018\/5451\/files\/sunbrella-natte-dragonfly-cushion.webp?v=1791319865"},{"product_id":"sunbrella-natte-eclipse-cushion","title":"Sunbrella Natte Eclipse Custom Outdoor Cushion","description":"\u003cp\u003e\u003cstrong\u003eSunbrella Natte Eclipse\u003c\/strong\u003e is a natté (basket-weave) fabric with a subtle, tactile texture. This deep blue has a relaxed, coastal feel on boats, poolside loungers and porch seating. Like all Sunbrella fabrics it is solution-dyed, so it resists fading, mildew and stains, cleans easily and carries Sunbrella's 5-year warranty. We make every cushion to order, any shape, with Dry Fast foam available for wet areas and a zippered cover.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing your foam (3-year foam warranty)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Density:\u003c\/strong\u003e a medium feel for everyday seats, chairs and mattresses. 1.8 lb\/ft³ density, 35 lb ILD, lasts about 7 years. For thin dining seats (1″–2″), Luxury foam holds up better.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLuxury:\u003c\/strong\u003e firm, and firmer as it gets thicker (7″–8″ feels very firm unless you weigh over 200 lb). 1.8 lb\/ft³, 50 lb ILD, lasts about 5–8 years. A good pick for dining seats from 1″ to 3″.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Fast:\u003c\/strong\u003e open-cell outdoor foam that lets water drain straight through, for patio, pool and boat cushions. Firm, 1.8 lb\/ft³, 60 lb ILD, lasts about 5–8 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Soft:\u003c\/strong\u003e for sofa back cushions and mattress toppers only, not seats. 1.2 lb\/ft³, 12 lb ILD, lasts about 5 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDacron wrap (optional):\u003c\/strong\u003e a 1″ layer of polyester fiberfill around the foam that rounds the edges and fills the cover. We attach it with fine staples that won't tear the foam or the cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber fill:\u003c\/strong\u003e loose 100% polyester filling for back cushions you want to sink into. Not for seats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEntering your size\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnter every measurement in inches.\u003c\/li\u003e\n\u003cli\u003eSizes between quarter inches are rounded up to the next ¼″.\u003c\/li\u003e\n\u003cli\u003eGive us the finished cushion size. If you add a Dacron wrap, don't make the numbers smaller; we allow for the wrap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePiping and ties\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePiping is a fabric-covered cord sewn into the edge seams. It gives the cushion a neat, defined edge and helps it keep its shape. Ties hold the cushion to the chair frame so it doesn't slide. If you need ties somewhere the options don't cover, \u003ca href=\"mailto:care@fabricakraft.com\"\u003eemail us\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThick cushions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe cut foam up to 6″ thick from one solid piece. From over 6″ to 8″, we glue two layers of the same foam together at no extra charge. For anything over 8″, or to mix two foam types in one cushion, \u003ca href=\"\/en-ca\/pages\/contact\"\u003econtact us\u003c\/a\u003e for a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturing Tolerances\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor custom orders, we cut to within ±0.5″ of your measurements.\u003c\/p\u003e\n","brand":"Sunbrella","offers":[{"title":"Default Title","offer_id":67892871758059,"sku":"NAT-5057-140","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/9018\/5451\/files\/sunbrella-natte-eclipse-cushion.webp?v=1791319864"},{"product_id":"sunbrella-natte-freesia-cushion","title":"Sunbrella Natte Freesia Custom Outdoor Cushion","description":"\u003cp\u003e\u003cstrong\u003eSunbrella Natte Freesia\u003c\/strong\u003e is a natté (basket-weave) fabric with a subtle, tactile texture. This sunny yellow brightens gray, white or wood furniture. Like all Sunbrella fabrics it is solution-dyed, so it resists fading, mildew and stains, cleans easily and carries Sunbrella's 5-year warranty. We make every cushion to order, any shape, with Dry Fast foam available for wet areas and a zippered cover.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing your foam (3-year foam warranty)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Density:\u003c\/strong\u003e a medium feel for everyday seats, chairs and mattresses. 1.8 lb\/ft³ density, 35 lb ILD, lasts about 7 years. For thin dining seats (1″–2″), Luxury foam holds up better.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLuxury:\u003c\/strong\u003e firm, and firmer as it gets thicker (7″–8″ feels very firm unless you weigh over 200 lb). 1.8 lb\/ft³, 50 lb ILD, lasts about 5–8 years. A good pick for dining seats from 1″ to 3″.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Fast:\u003c\/strong\u003e open-cell outdoor foam that lets water drain straight through, for patio, pool and boat cushions. Firm, 1.8 lb\/ft³, 60 lb ILD, lasts about 5–8 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Soft:\u003c\/strong\u003e for sofa back cushions and mattress toppers only, not seats. 1.2 lb\/ft³, 12 lb ILD, lasts about 5 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDacron wrap (optional):\u003c\/strong\u003e a 1″ layer of polyester fiberfill around the foam that rounds the edges and fills the cover. We attach it with fine staples that won't tear the foam or the cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber fill:\u003c\/strong\u003e loose 100% polyester filling for back cushions you want to sink into. Not for seats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEntering your size\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnter every measurement in inches.\u003c\/li\u003e\n\u003cli\u003eSizes between quarter inches are rounded up to the next ¼″.\u003c\/li\u003e\n\u003cli\u003eGive us the finished cushion size. If you add a Dacron wrap, don't make the numbers smaller; we allow for the wrap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePiping and ties\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePiping is a fabric-covered cord sewn into the edge seams. It gives the cushion a neat, defined edge and helps it keep its shape. Ties hold the cushion to the chair frame so it doesn't slide. If you need ties somewhere the options don't cover, \u003ca href=\"mailto:care@fabricakraft.com\"\u003eemail us\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThick cushions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe cut foam up to 6″ thick from one solid piece. From over 6″ to 8″, we glue two layers of the same foam together at no extra charge. For anything over 8″, or to mix two foam types in one cushion, \u003ca href=\"\/en-ca\/pages\/contact\"\u003econtact us\u003c\/a\u003e for a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturing Tolerances\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor custom orders, we cut to within ±0.5″ of your measurements.\u003c\/p\u003e\n","brand":"Sunbrella","offers":[{"title":"Default Title","offer_id":67892871823595,"sku":"NAT-P099-140","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/9018\/5451\/files\/sunbrella-natte-freesia-cushion.webp?v=1791319865"},{"product_id":"sunbrella-natte-mirage-cushion","title":"Sunbrella Natte Mirage Custom Outdoor Cushion","description":"\u003cp\u003e\u003cstrong\u003eSunbrella Natte Mirage\u003c\/strong\u003e is a natté (basket-weave) fabric with a subtle, tactile texture. This mid-tone blue has a relaxed, coastal feel on boats, poolside loungers and porch seating. Like all Sunbrella fabrics it is solution-dyed, so it resists fading, mildew and stains, cleans easily and carries Sunbrella's 5-year warranty. We make every cushion to order, any shape, with Dry Fast foam available for wet areas and a zippered cover.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing your foam (3-year foam warranty)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Density:\u003c\/strong\u003e a medium feel for everyday seats, chairs and mattresses. 1.8 lb\/ft³ density, 35 lb ILD, lasts about 7 years. For thin dining seats (1″–2″), Luxury foam holds up better.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLuxury:\u003c\/strong\u003e firm, and firmer as it gets thicker (7″–8″ feels very firm unless you weigh over 200 lb). 1.8 lb\/ft³, 50 lb ILD, lasts about 5–8 years. A good pick for dining seats from 1″ to 3″.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Fast:\u003c\/strong\u003e open-cell outdoor foam that lets water drain straight through, for patio, pool and boat cushions. Firm, 1.8 lb\/ft³, 60 lb ILD, lasts about 5–8 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Soft:\u003c\/strong\u003e for sofa back cushions and mattress toppers only, not seats. 1.2 lb\/ft³, 12 lb ILD, lasts about 5 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDacron wrap (optional):\u003c\/strong\u003e a 1″ layer of polyester fiberfill around the foam that rounds the edges and fills the cover. We attach it with fine staples that won't tear the foam or the cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber fill:\u003c\/strong\u003e loose 100% polyester filling for back cushions you want to sink into. Not for seats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEntering your size\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnter every measurement in inches.\u003c\/li\u003e\n\u003cli\u003eSizes between quarter inches are rounded up to the next ¼″.\u003c\/li\u003e\n\u003cli\u003eGive us the finished cushion size. If you add a Dacron wrap, don't make the numbers smaller; we allow for the wrap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePiping and ties\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePiping is a fabric-covered cord sewn into the edge seams. It gives the cushion a neat, defined edge and helps it keep its shape. Ties hold the cushion to the chair frame so it doesn't slide. If you need ties somewhere the options don't cover, \u003ca href=\"mailto:care@fabricakraft.com\"\u003eemail us\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThick cushions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe cut foam up to 6″ thick from one solid piece. From over 6″ to 8″, we glue two layers of the same foam together at no extra charge. For anything over 8″, or to mix two foam types in one cushion, \u003ca href=\"\/en-ca\/pages\/contact\"\u003econtact us\u003c\/a\u003e for a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturing Tolerances\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor custom orders, we cut to within ±0.5″ of your measurements.\u003c\/p\u003e\n","brand":"Sunbrella","offers":[{"title":"Default Title","offer_id":67892878999787,"sku":"NAT-P096-140","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/9018\/5451\/files\/sunbrella-natte-mirage-cushion.webp?v=1791319865"},{"product_id":"sunbrella-natte-marine-cushion","title":"Sunbrella Natte Marine Custom Outdoor Cushion","description":"\u003cp\u003e\u003cstrong\u003eSunbrella Natte Marine\u003c\/strong\u003e is a natté (basket-weave) fabric with a subtle, tactile texture. This deep blue has a relaxed, coastal feel on boats, poolside loungers and porch seating. Like all Sunbrella fabrics it is solution-dyed, so it resists fading, mildew and stains, cleans easily and carries Sunbrella's 5-year warranty. We make every cushion to order, any shape, with Dry Fast foam available for wet areas and a zippered cover.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing your foam (3-year foam warranty)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Density:\u003c\/strong\u003e a medium feel for everyday seats, chairs and mattresses. 1.8 lb\/ft³ density, 35 lb ILD, lasts about 7 years. For thin dining seats (1″–2″), Luxury foam holds up better.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLuxury:\u003c\/strong\u003e firm, and firmer as it gets thicker (7″–8″ feels very firm unless you weigh over 200 lb). 1.8 lb\/ft³, 50 lb ILD, lasts about 5–8 years. A good pick for dining seats from 1″ to 3″.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Fast:\u003c\/strong\u003e open-cell outdoor foam that lets water drain straight through, for patio, pool and boat cushions. Firm, 1.8 lb\/ft³, 60 lb ILD, lasts about 5–8 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Soft:\u003c\/strong\u003e for sofa back cushions and mattress toppers only, not seats. 1.2 lb\/ft³, 12 lb ILD, lasts about 5 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDacron wrap (optional):\u003c\/strong\u003e a 1″ layer of polyester fiberfill around the foam that rounds the edges and fills the cover. We attach it with fine staples that won't tear the foam or the cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber fill:\u003c\/strong\u003e loose 100% polyester filling for back cushions you want to sink into. Not for seats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEntering your size\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnter every measurement in inches.\u003c\/li\u003e\n\u003cli\u003eSizes between quarter inches are rounded up to the next ¼″.\u003c\/li\u003e\n\u003cli\u003eGive us the finished cushion size. If you add a Dacron wrap, don't make the numbers smaller; we allow for the wrap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePiping and ties\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePiping is a fabric-covered cord sewn into the edge seams. It gives the cushion a neat, defined edge and helps it keep its shape. Ties hold the cushion to the chair frame so it doesn't slide. If you need ties somewhere the options don't cover, \u003ca href=\"mailto:care@fabricakraft.com\"\u003eemail us\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThick cushions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe cut foam up to 6″ thick from one solid piece. From over 6″ to 8″, we glue two layers of the same foam together at no extra charge. For anything over 8″, or to mix two foam types in one cushion, \u003ca href=\"\/en-ca\/pages\/contact\"\u003econtact us\u003c\/a\u003e for a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturing Tolerances\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor custom orders, we cut to within ±0.5″ of your measurements.\u003c\/p\u003e\n","brand":"Sunbrella","offers":[{"title":"Default Title","offer_id":67892879065323,"sku":"NAT-5076-140","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/9018\/5451\/files\/sunbrella-natte-marine-cushion.webp?v=1791319864"},{"product_id":"sunbrella-natte-oyster-cushion","title":"Sunbrella Natte Oyster Custom Outdoor Cushion","description":"\u003cp\u003e\u003cstrong\u003eSunbrella Natte Oyster\u003c\/strong\u003e is a natté (basket-weave) fabric with a subtle, tactile texture. Its warm neutral tone sits easily with teak, wicker and stone, so it suits almost any porch or patio. Like all Sunbrella fabrics it is solution-dyed, so it resists fading, mildew and stains, cleans easily and carries Sunbrella's 5-year warranty. We make every cushion to order, any shape, with Dry Fast foam available for wet areas and a zippered cover.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing your foam (3-year foam warranty)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Density:\u003c\/strong\u003e a medium feel for everyday seats, chairs and mattresses. 1.8 lb\/ft³ density, 35 lb ILD, lasts about 7 years. For thin dining seats (1″–2″), Luxury foam holds up better.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLuxury:\u003c\/strong\u003e firm, and firmer as it gets thicker (7″–8″ feels very firm unless you weigh over 200 lb). 1.8 lb\/ft³, 50 lb ILD, lasts about 5–8 years. A good pick for dining seats from 1″ to 3″.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Fast:\u003c\/strong\u003e open-cell outdoor foam that lets water drain straight through, for patio, pool and boat cushions. Firm, 1.8 lb\/ft³, 60 lb ILD, lasts about 5–8 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Soft:\u003c\/strong\u003e for sofa back cushions and mattress toppers only, not seats. 1.2 lb\/ft³, 12 lb ILD, lasts about 5 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDacron wrap (optional):\u003c\/strong\u003e a 1″ layer of polyester fiberfill around the foam that rounds the edges and fills the cover. We attach it with fine staples that won't tear the foam or the cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber fill:\u003c\/strong\u003e loose 100% polyester filling for back cushions you want to sink into. Not for seats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEntering your size\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnter every measurement in inches.\u003c\/li\u003e\n\u003cli\u003eSizes between quarter inches are rounded up to the next ¼″.\u003c\/li\u003e\n\u003cli\u003eGive us the finished cushion size. If you add a Dacron wrap, don't make the numbers smaller; we allow for the wrap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePiping and ties\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePiping is a fabric-covered cord sewn into the edge seams. It gives the cushion a neat, defined edge and helps it keep its shape. Ties hold the cushion to the chair frame so it doesn't slide. If you need ties somewhere the options don't cover, \u003ca href=\"mailto:care@fabricakraft.com\"\u003eemail us\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThick cushions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe cut foam up to 6″ thick from one solid piece. From over 6″ to 8″, we glue two layers of the same foam together at no extra charge. For anything over 8″, or to mix two foam types in one cushion, \u003ca href=\"\/en-ca\/pages\/contact\"\u003econtact us\u003c\/a\u003e for a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturing Tolerances\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor custom orders, we cut to within ±0.5″ of your measurements.\u003c\/p\u003e\n","brand":"Sunbrella","offers":[{"title":"Default Title","offer_id":67892879229163,"sku":"NAT-5030-140","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/9018\/5451\/files\/sunbrella-natte-oyster-cushion.webp?v=1791319864"},{"product_id":"sunbrella-natte-antique-cushion","title":"Sunbrella Natte Antique Custom Outdoor Cushion","description":"\u003cp\u003e\u003cstrong\u003eSunbrella Natte Antique\u003c\/strong\u003e (NAT 5077) is a Sunbrella upholstery fabric, 55″ wide. Like all Sunbrella fabrics it is solution-dyed, so the color goes all the way through the fiber and resists fading, mildew and stains, and it cleans up easily. It works on patio chairs, benches, chaises, window seats and indoor banquettes alike.\u003c\/p\u003e\u003cp\u003eWe make every cushion to order in your exact size and shape. Choose your foam, piping and ties in the builder above, and see our \u003ca href=\"\/en-ca\/pages\/sunbrella-fabric\"\u003eSunbrella care guide\u003c\/a\u003e for cleaning tips.\u003c\/p\u003e","brand":"Sunbrella","offers":[{"title":"Default Title","offer_id":67949766344939,"sku":"NAT-5077","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/9018\/5451\/files\/716925_1_nat_5077_680x480_0_1183493.webp?v=1791745813"},{"product_id":"sunbrella-natte-charcoal-cushion","title":"Sunbrella Natte Charcoal Custom Outdoor Cushion","description":"\u003cp\u003e\u003cstrong\u003eSunbrella Natte Charcoal\u003c\/strong\u003e (NAT 5075) is a Sunbrella upholstery fabric, 55″ wide. Like all Sunbrella fabrics it is solution-dyed, so the color goes all the way through the fiber and resists fading, mildew and stains, and it cleans up easily. It works on patio chairs, benches, chaises, window seats and indoor banquettes alike.\u003c\/p\u003e\u003cp\u003eWe make every cushion to order in your exact size and shape. Choose your foam, piping and ties in the builder above, and see our \u003ca href=\"\/en-ca\/pages\/sunbrella-fabric\"\u003eSunbrella care guide\u003c\/a\u003e for cleaning tips.\u003c\/p\u003e","brand":"Sunbrella","offers":[{"title":"Default Title","offer_id":67949767885035,"sku":"NAT-5075","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/9018\/5451\/files\/716955_1_nat_5075_680x480_0_1218093.webp?v=1791745815"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/9018\/5451\/collections\/rasterize.jpg?v=1792385282","url":"https:\/\/www.fabricakraft.com\/en-ca\/collections\/sunbrella-natte-collection.oembed?page=2","provider":"Fabrica Kraft ","version":"1.0","type":"link"}