{"title":"Sunbrella European Collection","description":"\u003cp\u003eThe Sunbrella European collection at Fabrica Kraft has 3 fabrics: Archi Frame, Mezzo Atlas and Tundra Charcoal. Sunbrella is solution-dyed acrylic, so the color runs through the fiber and holds up to sun, rain and mildew. Pick any color and build a cushion, pillow or curtain to your exact size.\u003c\/p\u003e\u003cp\u003eThe European range has a refined, understated look, from the patterned Archi Frame to the deep Tundra Charcoal. Use Tundra Charcoal or Mezzo Atlas for terrace dining chairs or a built-in courtyard bench. Each cushion is cut within ±0.5″ of your size, with ties in matching fabric, and most ship in 2–3 weeks.\u003c\/p\u003e\u003cp\u003eEnter your size in the \u003ca href=\"\/en-ca\/products\/replacement-outdoor-chair-cushions-sunbrella\"\u003eoutdoor chair cushion builder\u003c\/a\u003e or the \u003ca href=\"\/en-ca\/products\/custom-bench-cushion-sunbrella\"\u003ebench cushion builder\u003c\/a\u003e, browse more \u003ca href=\"\/en-ca\/collections\/sunbrella-cushions\"\u003eSunbrella cushions\u003c\/a\u003e, or \u003ca href=\"\/en-ca\/pages\/fabric-swatches\"\u003eorder swatches\u003c\/a\u003e before you order.\u003c\/p\u003e\u003ch2\u003eQuestions about Sunbrella European\u003c\/h2\u003e\u003ch3\u003eCan Sunbrella European cushions stay outside in the rain?\u003c\/h3\u003e\u003cp\u003eYes. Sunbrella European is water- and stain-repellent and made for sun, rain and mildew, though it is not waterproof. For cushions left out in heavy rain, add Dry Fast foam, or see our Sunbrella waterproof range.\u003c\/p\u003e\u003ch3\u003eHow do I clean Sunbrella European cushions?\u003c\/h3\u003e\u003cp\u003eMost marks on Sunbrella European lift with a soft brush and a little mild soap in lukewarm water. For a deeper clean, unzip the covers and machine wash them, then air-dry before you put them back on.\u003c\/p\u003e\u003ch3\u003eCan I order a Sunbrella European swatch?\u003c\/h3\u003e\u003cp\u003eYes. Swatches are paid, and we send a one-time code that credits the swatch cost back on your cushion order. It is the best way to check Tundra Charcoal or Mezzo Atlas in daylight.\u003c\/p\u003e","products":[{"product_id":"sunbrella-archi-frame-cushion","title":"Sunbrella Archi Frame Custom Outdoor Cushion","description":"\u003cp\u003eFrom our European Collection, \u003cstrong\u003eSunbrella Archi Frame\u003c\/strong\u003e is a patterned outdoor fabric for anyone who wants more than a solid. It is solution-dyed acrylic, so the design holds up to strong sun, resists mildew, and wipes clean after a summer storm. Think about it for a set of bistro chair pads on a city balcony, back cushions on a modern sectional, or a long bench along a garden wall. It pairs well with black metal frames and pale concrete. Send us your measurements in any shape, choose your foam, and add piping or ties if you like.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing your foam (3-year foam warranty)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Density:\u003c\/strong\u003e a medium feel for everyday seats, chairs and mattresses. 1.8 lb\/ft³ density, 35 lb ILD, lasts about 7 years. For thin dining seats (1″–2″), Luxury foam holds up better.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLuxury:\u003c\/strong\u003e firm, and firmer as it gets thicker (7″–8″ feels very firm unless you weigh over 200 lb). 1.8 lb\/ft³, 50 lb ILD, lasts about 5–8 years. A good pick for dining seats from 1″ to 3″.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Fast:\u003c\/strong\u003e open-cell outdoor foam that lets water drain straight through, for patio, pool and boat cushions. Firm, 1.8 lb\/ft³, 60 lb ILD, lasts about 5–8 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Soft:\u003c\/strong\u003e for sofa back cushions and mattress toppers only, not seats. 1.2 lb\/ft³, 12 lb ILD, lasts about 5 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDacron wrap (optional):\u003c\/strong\u003e a 1″ layer of polyester fiberfill around the foam that rounds the edges and fills the cover. We attach it with fine staples that won't tear the foam or the cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber fill:\u003c\/strong\u003e loose 100% polyester filling for back cushions you want to sink into. Not for seats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEntering your size\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnter every measurement in inches.\u003c\/li\u003e\n\u003cli\u003eSizes between quarter inches are rounded up to the next ¼″.\u003c\/li\u003e\n\u003cli\u003eGive us the finished cushion size. If you add a Dacron wrap, don't make the numbers smaller; we allow for the wrap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePiping and ties\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePiping is a fabric-covered cord sewn into the edge seams. It gives the cushion a neat, defined edge and helps it keep its shape. Ties hold the cushion to the chair frame so it doesn't slide. If you need ties somewhere the options don't cover, \u003ca href=\"mailto:care@fabricakraft.com\"\u003eemail us\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThick cushions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe cut foam up to 6″ thick from one solid piece. From over 6″ to 8″, we glue two layers of the same foam together at no extra charge. For anything over 8″, or to mix two foam types in one cushion, \u003ca href=\"\/en-ca\/pages\/contact\"\u003econtact us\u003c\/a\u003e for a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturing Tolerances\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor custom orders, we cut to within ±0.5″ of your measurements.\u003c\/p\u003e","brand":"Sunbrella","offers":[{"title":"Default Title","offer_id":44420780032235,"sku":"ARCH-R051-140","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/9018\/5451\/files\/Sunbrella-Archi-Frame-Cushion.png?v=1702681264"},{"product_id":"sunbrella-mezzo-atlas-cushion","title":"Sunbrella Mezzo Atlas Custom Outdoor Cushion","description":"\u003cp\u003eFrom the European Collection, \u003cstrong\u003eSunbrella Mezzo Atlas\u003c\/strong\u003e has a refined, understated look for well-planned outdoor rooms. It pairs nicely with teak, natural stone, and black metal frames. Use it for outdoor dining chair cushions on a terrace, a built-in bench along a courtyard wall, or a lounge sofa in a sunroom. It is a good choice when you want the fabric to support the furniture rather than steal the show. We cut the foam to your measurements, in shapes from simple rectangles to L-shapes, and sew a zippered cover over it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing your foam (3-year foam warranty)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Density:\u003c\/strong\u003e a medium feel for everyday seats, chairs and mattresses. 1.8 lb\/ft³ density, 35 lb ILD, lasts about 7 years. For thin dining seats (1″–2″), Luxury foam holds up better.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLuxury:\u003c\/strong\u003e firm, and firmer as it gets thicker (7″–8″ feels very firm unless you weigh over 200 lb). 1.8 lb\/ft³, 50 lb ILD, lasts about 5–8 years. A good pick for dining seats from 1″ to 3″.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Fast:\u003c\/strong\u003e open-cell outdoor foam that lets water drain straight through, for patio, pool and boat cushions. Firm, 1.8 lb\/ft³, 60 lb ILD, lasts about 5–8 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Soft:\u003c\/strong\u003e for sofa back cushions and mattress toppers only, not seats. 1.2 lb\/ft³, 12 lb ILD, lasts about 5 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDacron wrap (optional):\u003c\/strong\u003e a 1″ layer of polyester fiberfill around the foam that rounds the edges and fills the cover. We attach it with fine staples that won't tear the foam or the cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber fill:\u003c\/strong\u003e loose 100% polyester filling for back cushions you want to sink into. Not for seats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEntering your size\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnter every measurement in inches.\u003c\/li\u003e\n\u003cli\u003eSizes between quarter inches are rounded up to the next ¼″.\u003c\/li\u003e\n\u003cli\u003eGive us the finished cushion size. If you add a Dacron wrap, don't make the numbers smaller; we allow for the wrap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePiping and ties\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePiping is a fabric-covered cord sewn into the edge seams. It gives the cushion a neat, defined edge and helps it keep its shape. Ties hold the cushion to the chair frame so it doesn't slide. If you need ties somewhere the options don't cover, \u003ca href=\"mailto:care@fabricakraft.com\"\u003eemail us\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThick cushions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe cut foam up to 6″ thick from one solid piece. From over 6″ to 8″, we glue two layers of the same foam together at no extra charge. For anything over 8″, or to mix two foam types in one cushion, \u003ca href=\"\/en-ca\/pages\/contact\"\u003econtact us\u003c\/a\u003e for a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturing Tolerances\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor custom orders, we cut to within ±0.5″ of your measurements.\u003c\/p\u003e","brand":"Sunbrella","offers":[{"title":"Default Title","offer_id":44420974772459,"sku":"MEZ-10227-140","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/9018\/5451\/files\/Sunbrella-Mezzo-Atlas-Cushion.png?v=1702681796"},{"product_id":"sunbrella-tundra-charcoal-cushion","title":"Sunbrella Tundra Charcoal Custom Outdoor Cushion","description":"\u003cp\u003eCharcoal gray \u003cstrong\u003eSunbrella Tundra Charcoal\u003c\/strong\u003e, from the European Collection, has a deep, solid look. It pairs with light stone, warm cedar, and white walls. Use it on a modern sectional, a fire pit bench, or patio dining chairs. Dark tones anchor a space and make bright accents stand out. Like all Sunbrella acrylic, it is solution-dyed to resist fading, and it resists mildew as well. Choose High Density foam for firm, structured seats, and we will make each cushion to your size.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoosing your foam (3-year foam warranty)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Density:\u003c\/strong\u003e a medium feel for everyday seats, chairs and mattresses. 1.8 lb\/ft³ density, 35 lb ILD, lasts about 7 years. For thin dining seats (1″–2″), Luxury foam holds up better.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLuxury:\u003c\/strong\u003e firm, and firmer as it gets thicker (7″–8″ feels very firm unless you weigh over 200 lb). 1.8 lb\/ft³, 50 lb ILD, lasts about 5–8 years. A good pick for dining seats from 1″ to 3″.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry Fast:\u003c\/strong\u003e open-cell outdoor foam that lets water drain straight through, for patio, pool and boat cushions. Firm, 1.8 lb\/ft³, 60 lb ILD, lasts about 5–8 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuper Soft:\u003c\/strong\u003e for sofa back cushions and mattress toppers only, not seats. 1.2 lb\/ft³, 12 lb ILD, lasts about 5 years.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDacron wrap (optional):\u003c\/strong\u003e a 1″ layer of polyester fiberfill around the foam that rounds the edges and fills the cover. We attach it with fine staples that won't tear the foam or the cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFiber fill:\u003c\/strong\u003e loose 100% polyester filling for back cushions you want to sink into. Not for seats.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEntering your size\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnter every measurement in inches.\u003c\/li\u003e\n\u003cli\u003eSizes between quarter inches are rounded up to the next ¼″.\u003c\/li\u003e\n\u003cli\u003eGive us the finished cushion size. If you add a Dacron wrap, don't make the numbers smaller; we allow for the wrap.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePiping and ties\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePiping is a fabric-covered cord sewn into the edge seams. It gives the cushion a neat, defined edge and helps it keep its shape. Ties hold the cushion to the chair frame so it doesn't slide. If you need ties somewhere the options don't cover, \u003ca href=\"mailto:care@fabricakraft.com\"\u003eemail us\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThick cushions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eWe cut foam up to 6″ thick from one solid piece. From over 6″ to 8″, we glue two layers of the same foam together at no extra charge. For anything over 8″, or to mix two foam types in one cushion, \u003ca href=\"\/en-ca\/pages\/contact\"\u003econtact us\u003c\/a\u003e for a quote.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManufacturing Tolerances\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor custom orders, we cut to within ±0.5″ of your measurements.\u003c\/p\u003e","brand":"Sunbrella","offers":[{"title":"Default Title","offer_id":44420981850347,"sku":"TUN-J218-140","price":135.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/9018\/5451\/files\/Sunbrella-Tundra-Charcoal-Cushion.png?v=1702681825"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0674\/9018\/5451\/collections\/Sunbrella-Tundra-Charcoal-Cushion.png?v=1792350277","url":"https:\/\/www.fabricakraft.com\/en-ca\/collections\/sunbrella-european-collection.oembed","provider":"Fabrica Kraft ","version":"1.0","type":"link"}